SIST EN ISO 7094:2002
(Main)Plain washers - Extra large series - Product grade C (ISO 7094:2000)
General Information
- Abstract
Migrated from Progress Sheet (TC Comment) (2000-07-10): Crash 1996: Await ISO decision as to the withdrawal of ISO 7091 & 7094.
- Status
- Published
- Publication Date
- 30-Jun-2002
- Technical Committee
- ISEL - Mechanical elements
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jul-2002
- Due Date
- 01-Jul-2002
- Completion Date
- 01-Jul-2002
Overview
EN ISO 7094:2000 - Plain washers - Extra large series - Product grade C (ISO 7094:2000) defines the characteristics of plain (flat) washers in the extra large size range and designates the required quality level as Product grade C. This European adoption (CEN) was also published in Slovenia as SIST EN ISO 7094:2002. The document sits under ICS 21.060.30 (washers, locking elements) and was migrated from a progress sheet; ISO action on withdrawal of ISO 7091 & 7094 was noted in the historical record.
Key topics and technical requirements
While avoiding specific numerical values (see the standard for exact dimensions), EN ISO 7094 typically addresses:
- Scope and definitions for plain (flat) washers in the extra large series.
- Dimensional requirements: nominal external diameters, inside (bore) diameters and thickness classes for the extra large range.
- Tolerances and permissible deviations for form and size to ensure interchangeability.
- Product grade C requirements, indicating the intended manufacturing/quality level and acceptance criteria.
- Marking, identification and packaging expectations to support traceability and correct use.
- Reference to testing or inspection methods applicable to ensure compliance with the standard.
For precise figures, tables and tolerances, consult the official EN ISO 7094:2000 text.
Applications
EN ISO 7094 is relevant wherever larger-diameter plain washers are required to distribute loads, protect surfaces or maintain assembly geometry. Typical applications include:
- Structural and heavy mechanical assemblies where extra-large washers prevent bearing failure.
- Fastening systems in construction, heavy machinery, rail and offshore equipment.
- OEM manufacturing and repair workshops specifying standardized washers for interchangeability.
- Procurement and inventory management when selecting ISO-compliant fastener accessories.
Who uses this standard
- Mechanical and structural engineers specifying fastenings
- Fastener and washer manufacturers producing to international standards
- Quality assurance and inspection personnel verifying compliance
- Procurement officers and technical buyers requiring standardized parts
- Standards bodies and certification organizations referencing washer grades
Related standards
- ISO 7094 (original international publication)
- ISO 7091 (related washer series) - historical note: EN records mention awaiting ISO decision about withdrawal of ISO 7091 & 7094
- National adoptions such as SIST EN ISO 7094:2002 (Slovenia)
For design work, procurement or manufacturing, reference the full EN ISO 7094:2000 document to obtain exact dimensions, tables and acceptance criteria.
Relations
- Effective Date
- 01-Jul-2002
- Effective Date
- 28-Jan-2026
- Refers
SIST EN 13684:2004 - Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
SIST EN ISO 7094:2002 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Plain washers - Extra large series - Product grade C (ISO 7094:2000)". This standard covers: Migrated from Progress Sheet (TC Comment) (2000-07-10): Crash 1996: Await ISO decision as to the withdrawal of ISO 7091 & 7094.
Migrated from Progress Sheet (TC Comment) (2000-07-10): Crash 1996: Await ISO decision as to the withdrawal of ISO 7091 & 7094.
SIST EN ISO 7094:2002 is classified under the following ICS (International Classification for Standards) categories: 21.060.30 - Washers, locking elements. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 7094:2002 has the following relationships with other standards: It is inter standard links to SIST ISO 7094:1996, SIST EN 1337-2:2004, SIST EN 13684:2004, SIST EN ISO 6974-1:2001, SIST-TS CEN/TS 13149-3:2009, SIST EN 1090-3:2019, SIST EN 1090-3:2008, SIST EN 1090-2:2008+A1:2012, SIST EN 1090-2:2018+A1:2024, SIST EN 1090-2:2018, SIST EN ISO 7094:2002/AC:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 7094:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Okrogle ravne podložke - Izredno velike vrste -
Razred izdelave C (ISO 7094:2000)Flache Scheiben - Extra große Reihe - Produktklasse C (ISO 7094:2000)Rondelles plates - Série tres large - Grade C (ISO 7094:2000)Plain washers - Extra large series - Product grade C (ISO 7094:2000)21.060.30Podložke, varovalni elementiWashers, locking elementsICS:T
...