SIST EN 60061-1:1999/A23:2000
(Amendment)Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps
Subscribe to IEC 60061 Database to access the full and updated content of the series.
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit -- Teil 1: Lampensockel
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité -- Partie 1: Culots de lampes
Subscribe to IEC 60061 Database to access the full and updated content of the series.
Vznožki in okovi sijalk skupaj s kalibri za nadzorovanje izmenljivosti in varnosti – 1. del: Vznožki sijalk
General Information
Relations
Overview
EN 60061-1:1993/A23:1999 (CLC) - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps - is the European adoption of the IEC 60061-1 series amendment. The standard defines requirements for lamp caps to ensure mechanical and electrical interchangeability and safe use with corresponding holders. Access to the full and updated technical content is available through the IEC 60061 database (subscription required).
Key Topics
The standard focuses on practical, safety-driven aspects of lamp caps and covers topics such as:
- Interchangeability requirements - criteria that ensure lamp caps fit and operate correctly with standardized holders.
- Mechanical and dimensional characteristics - physical form, thread, pins or bayonet features and tolerances necessary for compatibility (general scope; specific dimensions are in the full standard).
- Gauging and verification - use of control gauges and methods for checking caps for conformity with interchangeability limits.
- Safety considerations - design principles that mitigate risks of electrical shock, overheating or mechanical failure in typical lamp-holder combinations.
- Marking and identification - requirements for labeling caps to support correct selection and regulatory compliance.
- Test procedures - prescribed tests for mechanical strength, electrical continuity, and endurance to validate compliance (detailed test methods appear in the full IEC text).
Applications
EN 60061-1 is essential for anyone involved in the lighting supply chain who must ensure safe, interchangeable lamp components:
- Lamp and cap manufacturers - design and production to recognized interchangeability and safety criteria.
- Lighting fixture and holder manufacturers - confirming compatibility with standardized lamp caps.
- Testing laboratories and conformity assessment bodies - performing gauging and type testing to verify compliance.
- Procurement and specifications teams - selecting compliant components for buildings, industrial installations and retail products.
- Regulatory authorities and safety inspectors - referencing harmonized requirements for consumer and commercial lighting equipment.
Related Standards
- IEC 60061 series (other parts cover holders, gauges and complete interchangeability systems)
- National adoptions and amendments (EN/CLC versions may include local language editions)
For the exact dimensional data, test methods and amendment details (A23:1999), consult the official IEC 60061 database or the CLC publication. Subscribing to the IEC 60061 database provides the full and updated content of the series for precise implementation and certification.
Frequently Asked Questions
SIST EN 60061-1:1999/A23:2000 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps". This standard covers: Subscribe to <a href="http://webstore.iec.ch/webstore/webstore.nsf/Artnum_PK/34192?opendocument">IEC 60061 Database to access the full and updated content of the series.
Subscribe to <a href="http://webstore.iec.ch/webstore/webstore.nsf/Artnum_PK/34192?opendocument">IEC 60061 Database to access the full and updated content of the series.
SIST EN 60061-1:1999/A23:2000 is classified under the following ICS (International Classification for Standards) categories: 29.140.10 - Lamp caps and holders. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60061-1:1999/A23:2000 has the following relationships with other standards: It is inter standard links to SIST EN 60061-1:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 60061-1:1999/A23:2000 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 60061-1:1999/A23:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI SIST EN 60061-
1:1999/A23:2000
prva izdaja
STANDARD
september 2000
Lamp caps and holders together with gauges for the control of interchangeability
and safety - Part 1: Lamp caps - (IEC 60061-1:1969/A23:1999)
ICS 29.140.10 Referenčna
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...