SIST EN 13108-8:2006
(Main)Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt
Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt
This European Standard specifies requirements for the classification and description of reclaimed asphalt as a constituent material for asphalt mixtures.
This European Standard only specifies reclaimed asphalt with bituminous binders: paving grade bitumen, modified bitumen or hard grade bitumen.
Asphaltmischgut - Mischgutanforderungen - Teil 8: Ausbauasphalt
Diese Europäische Norm legt Anforderungen an die Klassifizierung und Beschreibung von Ausbauasphalt fest,
der als Bestandteil von Asphaltmischgütern verwendet wird.
Diese Europäische Norm enthält nur Festlegungen für Ausbauasphalt mit bitumenhaltigen Bindemitteln:
Straßenbaubitumen, modifiziertes Bitumen oder Hartbitumen.
Mélanges bitumineux - Spécifications de matériaux - Partie 8 : Agrégats d'enrobés
Cette Norme européenne spécifie des exigences pour la description et la classification des agrégats
d?enrobés utilisés comme constituant des mélanges bitumineux.
Cette Norme européenne donne uniquement des exigences pour les agrégats d?enrobés aux liants
bitumineux : bitume pur, bitume modifié ou bitume dur.
Bitumenske zmesi – Specifikacije materialov – 8. del: Ponovno uporabljen asfalt
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bituminous mixtures - Material specifications - Part 8: Reclaimed asphaltBitumenske zmesi – Specifikacije materialov – 8. del: Ponovno uporabljen asfaltMélanges bitumineux - Spécifications de matériaux - Partie 8 : Agrégats d'enrobésAsphaltmischgut - Mischgutanforderungen - Teil 8: AusbauasphaltTa slovenski standard je istoveten z:EN 13108-8:2005SIST EN 13108-8:2006en93.080.20ICS:SLOVENSKI
STANDARDSIST EN 13108-8:200601-januar-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13108-8October 2005ICS 93.080.20 English VersionBituminous mixtures - Material specifications - Part 8: ReclaimedasphaltMélanges bitumineux - Spécifications de matériaux - Partie8 : Agrégats d'enrobésAsphaltmischgut - Mischgutanforderungen - Teil 8:AusbauasphaltThis European Standard was approved by CEN on 29 August 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13108-8:2005: E
EN 13108-8:2005 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms, definitions, symbols and abbreviations.5 3.1 Terms and definitions.5 3.2 Symbols and abbreviations.6 4 Requirements for the feedstock.6 4.1 Foreign matter.6 4.2 Binder.7 4.2.1 Type of binder.7 4.2.2 Binder properties.7 4.3 Aggregate grading and D.8 4.4 Binder content.8 4.5 Particle size reclaimed asphalt.8 5 Description of the feedstock.8 5.1 Source of reclaimed asphalt.8 5.2 Type and properties of aggregate.8 5.3 Homogeneity.9 5.4 Sampling and Testing.9 5.4.1 Feedstock.9 5.4.2 Sampling and number of samples, n.9 5.4.3 Testing.9 5.4.4 Reclaimed asphalt for low percentage additions.9 5.5 Stock control.9 6 Identification.9
EN 13108-8:2005 (E) 3 Foreword This European Standard (EN 13108-8:2005) has been prepared by Technical Committee CEN/TC 227
“Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the latest by January 2008. This European Standard does not replace any existing European Standard. This European Standard is one of a series as listed below: prEN 13108-1, Bituminous mixtures — Material specifications — Part 1: Asphalt concrete. prEN 13108-2, Bituminous mixtures — Material specifications — Part 2: Asphalt concrete for very thin layers.
prEN 13108-3, Bituminous mixtures — Material specification — Part 3: Soft asphalt. prEN 13108-4, Bituminous mixtures — Material specification — Part 4: Hot rolled asphalt. prEN 13108-5, Bituminous mixtures — Material specifications — Part 5: Stone mastic asphalt. prEN 13108-6, Bituminous mixtures — Material specifications — Part 6: Mastic asphalt. prEN 13108-7, Bituminous mixtures — Material specifications — Part 7: Porous asphalt (PA). prEN 13108-10, Bituminous mixtures — Quality — Part 10: Factory production control. prEN 13108-20, Bituminous mixtures —Material
specifications — Part 20:Type testing. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 13108-8:2005 (E) 4 Introduction The increasing use of recycling in asphalt production makes it necessary to specify reclaimed asphalt sold as a constituent material in a way similar to that of aggregates and binders. In the asphalt product standards prEN 13108-1 up to and including prEN 13108-7 the use of reclaimed asphalt is permitted with requirements related to the percentage addition. Reclaimed asphalt comprises asphalt, reclaimed by milling of asphalt road layers, by crushing of slabs ripped up from asphalt pavements, lumps from slabs, and asphalt from reject and surplus production. Reclaimed asphalt (RA) may be used as a constituent material for bituminous mixtures manufactured in a hot mix asphalt plant, in accordance with the specifications for those mixtures. This European Standard contains requirements for reclaimed asphalt with respect to binder and aggregate properties and foreign matter that apply in all cases of usage of reclaimed asphalt. Additionally, this European Standard indicates which properties of the reclaimed asphalt and its constituent materials shall be declared and documented if a description of a feedstock is required. The particle size of the aggregate, the properties of the binder, and foreign matter in the reclaimed asphalt are relevant to the quality of the product, i.e. the fresh asphalt in which it is mixed. The size of the particles of asphalt in the reclaimed asphalt, which may range from large lumps to finely milled material, is relevant only to the process to be used to mix into the fresh asphalt. Since the requirements for the asphalt mixtures are the same for mixtures with and without reclaimed asphalt, the level of homogeneity of the material in practice determines the maximum amount of reclaimed asphalt that may be used.
EN 13108-8:2005 (E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.