SIST EN 438-1:2016
(Main)High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information
This part of EN 438 gives an overview of the standard as well as guidance on the selection and application of test methods and specifications contained in Parts 2 to 9 of EN 438.
Dekorative Hochdruck-Schichtpressstoffplatten (HPL) - Platten auf Basis härtbarer Harze (Schichtpressstoffe) - Teil 1: Einleitung und allgemeine Informationen
Dieser Teil von EN 438 gibt einen Überblick über die Norm und liefert eine Anleitung für die Auswahl und Anwendung der in EN 438 2, EN 438 3, EN 438 4, EN 438 5, EN 438 6, EN 438 7, EN 438 8 und EN 438 9, ent¬haltenen Prüfverfahren und Spezifikationen.
Diese Norm gilt für dekorative Hochdruck Schichtpressstoffplatten (HPL), die durch ein Hochdruckverfah-ren hergestellt werden.
Stratifiés décoratifs haute pression (HPL) - Plaques à base de résines thermodurcissables (communément appelées stratifiés) - Partie 1: Introduction et informations générales
La présente partie de l’EN 438 donne une description générale de la norme, ainsi qu’un guide pour la sélection et l’application des méthodes d’essai et des spécifications contenues dans les EN 438-2, EN 438-3, EN 438-4, EN 438-5, EN 438-6, prEN 438-7, EN 438-8 et EN 438-9.
La présente Norme Européenne est applicable au stratifié(s) décoratif(s) haute pression (HPL) produits par un procédé haute pression.
Dekorativni visokotlačni laminati (HPL) - Plošče na osnovi duromernih smol - 1. del: Uvod in splošne informacije
Ta del standarda EN 438 podaja pregled standarda in navodila glede izbire ter uporabe preskusnih metod in specifikacij, vključenih v delih standarda EN 438 od 2 do 9.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dekorative Hochdruck-Schichtpressstoffplatten (HPL) - Platten auf Basis härtbarer Harze (Schichtpressstoffe) - Teil 1: Einleitung und allgemeine InformationenStratifiés décoratifs haute pression (HPL) - Plaques à base de résines thermodurcissables (communément appelées stratifiés) - Partie 1: Introduction et informations généralesHigh-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information83.140.20Laminated sheetsICS:Ta slovenski standard je istoveten z:EN 438-1:2016SIST EN 438-1:2016en,fr,de01-april-2016SIST EN 438-1:2016SLOVENSKI
STANDARDSIST EN 438-1:20051DGRPHãþD
SIST EN 438-1:2016
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 438-1
February
t r s x ICS
z uä s v rä t r Supersedes EN
v u zæ sã t r r wEnglish Version
Introduction and general information informations générales æ Teil
sã Einleitung und allgemeine Informationen This European Standard was approved by CEN on
s u December
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v u zæ sã t r s x ESIST EN 438-1:2016
EN 438-1:2016 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Guidance in the use of the standard . 5 4.1 Description of parts . 5 4.2 Applications . 6 5 Product classification systems . 6 Annex A (informative)
Addendum relating to hygienic, health and safety information for laminates intended for interior use . 8 A.1 Cleanability. 8 A.2 Hygiene . 8 A.3 Contact with foodstuffs . 8 A.4 Dangerous substances . 8 Bibliography . 9
SIST EN 438-1:2016
EN 438-1:2016 (E) 3 European foreword This document (EN 438-1:2016) has been prepared by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2016, and conflicting national standards shall be withdrawn at the latest by August 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 438-1:2005. EN 438, High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (usually called laminates), consists of the following parts: — Part 1: Introduction and general information — Part 2: Determination of properties — Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates — Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates — Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater — Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes — Part 8: Classification and specifications for design laminates — Part 9: Classification and specifications for alternative core laminates According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 438-1:2016
EN 438-1:2016 (E) 4 1 Scope This part of EN 438 gives an overview of the standard, and provides guidance in the selection and application of test methods and specifications contained in EN 438-2, EN 438-3, EN 438-4, EN 438-5, EN 438-6, EN 438-7, EN 438-8 and EN 438-9. This European Standard is applicable to high-pressure decorative laminate(s) (HPL) produced by using a high pressure process. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 438-2, High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (usually called Laminates) — Part 2: Determination of properties EN 438-3, High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (usually called laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates EN 438-4, High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (usually called laminates) — Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater. EN 438-5, High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (usually called laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates EN 438-6, High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (usually called laminates) — Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater EN 438-7, High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (usually called laminates) — Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes EN 438-8, High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (usually called laminates) — Part 8: Classification and specifications for design laminates EN 438-9, High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (usually called laminates) —Part 9: Classification and specifications for alternative core laminates EN 13329, Laminate floor coverings — Elements with a surface layer based on aminoplastic thermosetting resins — Specifications, requirements and test methods 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. SIST EN 438-1:2016
EN 438-1:2016 (E) 5 3.1 high-pressure decora
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.