SIST EN ISO 11114-1:2020
(Main)Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020)
This document provides requirements for the selection of safe combinations of metallic cylinder and
valve materials and cylinder gas content.
The compatibility data given is related to single gases and to gas mixtures.
Seamless metallic, welded metallic and composite gas cylinders and their valves, used to contain
compressed, liquefied and dissolved gases are considered.
NOTE In this document the term “cylinder” refers to transportable pressure receptacles, which also include
tubes and pressure drums.
Aspects such as the quality of delivered gas product are not considered.
Gasflaschen - Verträglichkeit von Werkstoffen für Gasflaschen und Ventile mit den in Berührung kommenden Gasen - Teil 1: Metallische Werkstoffe (ISO 11114-1:2020)
Dieses Dokument enthält Anforderungen für die Auswahl von sicheren Kombinationen von metallischen Gasflaschen- und Ventilwerkstoffen und den in Berührung kommenden Gasen.
Die Angaben zur Verträglichkeit beziehen sich auf Einzelgase und Gasgemische.
Es sind nahtlose metallische Gasflaschen, geschweißte metallische Gasflaschen und Gasflaschen aus Verbundwerkstoffen (Composite-Gasflaschen) einschließlich ihrer Ventile zur Verwendung mit verdichteten, verflüssigten und gelösten Gasen berücksichtigt.
ANMERKUNG In diesem Dokument wird der Begriff „Flasche“ für ortsbewegliche Druckgefäße, welche auch Großflaschen und Druckfässer umfassen, verwendet.
Aspekte wie die Qualität des gelieferten Gasproduktes werden nicht berücksichtigt.
Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 1: Matériaux métalliques (ISO 11114-1:2020)
Le présent document fournit les exigences pour le choix des combinaisons de matériaux sûres pour les bouteilles à gaz métalliques et leur robinet et les gaz contenus dans la bouteille.
Les données de compatibilité indiquées se rapportent aux gaz à l'état pur et aux mélanges de gaz.
Le présent document prend en considération les bouteilles à gaz métalliques sans soudure, soudées et composites, et leurs robinets utilisés pour contenir des gaz comprimés, liquéfiés et dissous.
NOTE Dans le présent document, le terme «bouteille» se réfère aux récipients à pression transportables qui incluent aussi les tubes et les fûts à pression.
Il ne traite pas d'autres aspects tels que la qualité du produit gazeux fourni.
Plinske jeklenke - Združljivost materialov za ventil in jeklenko s plinom - 1. del: Kovinski materiali (ISO 11114-1:2020)
Ta dokument določa zahteve za izbiro varnih kombinacij materialov za kovinske jeklenke in ventile ter jeklenke s plinom.
Navedeni podatki o združljivosti se navezujejo na enokomponentne pline in mešanice plinov.
Obravnavane so kovinske, varjene kovinske in plinske jeklenke iz kompozitnih materialov brez spojev in njihovi ventili, ki se uporabljajo za stisnjene, utekočinjene in raztopljene pline.
OPOMBA: V tem dokumentu se izraz »jeklenka« navezuje na prenosne tlačne posode, ki vključujejo tudi cevi in tlačne valje.
Vidiki, kot je kakovost dobavljenega plina, niso obravnavani.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11114-1:2020
01-september-2020
Nadomešča:
SIST EN ISO 11114-1:2012
SIST EN ISO 11114-1:2012/A1:2017
Plinske jeklenke - Združljivost materialov za ventil in jeklenko s plinom - 1. del:
Kovinski materiali (ISO 11114-1:2020)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1:
Metallic materials (ISO 11114-1:2020)
Gasflaschen - Verträglichkeit von Werkstoffen für Gasflaschen und Ventile mit den in
Berührung kommenden Gasen - Teil 1: Metallische Werkstoffe (ISO 11114-1:2020)
Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les
contenus gazeux - Partie 1: Matériaux métalliques (ISO 11114-1:2020)
Ta slovenski standard je istoveten z: EN ISO 11114-1:2020
ICS:
23.020.35 Plinske jeklenke Gas cylinders
23.060.40 Tlačni regulatorji Pressure regulators
SIST EN ISO 11114-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11114-1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 11114-1:2020
EN ISO 11114-1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2020
EUROPÄISCHE NORM
ICS 23.020.35 Supersedes EN ISO 11114-1:2012
English Version
Gas cylinders - Compatibility of cylinder and valve
materials with gas contents - Part 1: Metallic materials
(ISO 11114-1:2020)
Bouteilles à gaz - Compatibilité des matériaux des Gasflaschen - Verträglichkeit von Werkstoffen für
bouteilles et des robinets avec les contenus gazeux - Gasflaschen und Ventile mit den in Berührung
Partie 1: Matériaux métalliques (ISO 11114-1:2020) kommenden Gasen - Teil 1: Metallische Werkstoffe
(ISO 11114-1:2020)
This European Standard was approved by CEN on 11 May 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11114-1:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11114-1:2020
EN ISO 11114-1:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11114-1:2020
EN ISO 11114-1:2020 (E)
European foreword
This document (EN ISO 11114-1:2020) has been prepared by Technical Committee ISO/TC 58 "Gas
cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2020, and conflicting national standards
shall be withdrawn at the latest by December 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11114-1:2012.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia
...
SLOVENSKI STANDARD
oSIST prEN ISO 11114-1:2019
01-junij-2019
Plinske jeklenke - Združljivost materialov za ventil in jeklenko s plinom - 1. del:
Kovinski materiali (ISO/DIS 11114-1:2019)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1:
Metallic materials (ISO/DIS 11114-1:2019)
Gasflaschen - Verträglichkeit von Werkstoffen für Gasflaschen und Ventile mit den in
Berührung kommenden Gasen - Teil 1: Metallische Werkstoffe (ISO/DIS 11114-1:2019)
Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les
contenus gazeux - Partie 1: Matériaux métalliques (ISO/DIS 11114-1:2019)
Ta slovenski standard je istoveten z: prEN ISO 11114-1
ICS:
23.020.35 Plinske jeklenke Gas cylinders
23.060.40 Tlačni regulatorji Pressure regulators
oSIST prEN ISO 11114-1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 11114-1:2019
---------------------- Page: 2 ----------------------
oSIST prEN ISO 11114-1:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11114-1
ISO/TC 58 Secretariat: BSI
Voting begins on: Voting terminates on:
2019-04-30 2019-07-23
Gas cylinders — Compatibility of cylinder and valve
materials with gas content —
Part 1:
Metallic materials
Bouteilles à gaz — Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux —
Partie 1: Matériaux métalliques
ICS: 23.020.35
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 11114-1:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019
---------------------- Page: 3 ----------------------
oSIST prEN ISO 11114-1:2019
ISO/DIS 11114-1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 11114-1:2019
ISO/DIS 11114-1:2019(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Materials . 2
4.1 General . 2
4.2 Cylinder materials .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.