Cranes - Cabins and control stations - Part 3: Tower cranes

This part of ISO 8566 specifies the requirements for cabins and control stations for tower cranes as defined in ISO 4306-3. It is intended to be used in conjunction with ISO 8566-1.

Appareils de levage à charge suspendue - Cabines et postes de conduite - Partie 3: Grues à tour

L'ISO 8566-3:2010 sp�cifie les exigences auxquelles doivent satisfaire les cabines et postes de conduite des grues � tour.

Žerjavi - Kabine in kontrolne postaje - 3. del: Stolpni žerjavi

Ta del standarda ISO 8566 določa zahteve za kabine in krmilne postaje za stolpne žerjave iz standarda ISO 4306-3. Standard je treba uporabljati v povezavi s standardom ISO 8566-1.

General Information

Status
Published
Public Enquiry End Date
19-Feb-2012
Publication Date
27-Sep-2012
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
21-Aug-2012
Due Date
26-Oct-2012
Completion Date
28-Sep-2012

Relations

Buy Standard

Standard
ISO 8566-3:2010
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 8566-3:2010 - Cranes -- Cabins and control stations
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 8566-3:2012
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 8566-3:2010 - Appareils de levage a charge suspendue -- Cabines et postes de conduite
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

МЕЖДУНАРОДНЫЙ ISO
СТАНДАРТ 8566-3
Второе издание
2010-02-01



Краны грузоподъемные. Кабины и
посты управления
Часть 3.
Башенные краны
Cranes — Cabins and control station —
Part 3: Tower cranes






Ссылочный номер
ISO 8566-3:2010(R)

©
ISO 2010

---------------------- Page: 1 ----------------------
ISO 8566-3:2010(R)
Отказ от ответственности при работе в PDF
Настоящий файл PDF может содержать интегрированные шрифты. В соответствии с условиями лицензирования, принятыми
фирмой Adobe, этот файл можно распечатать или смотреть на экране, но его нельзя изменить, пока не будет получена
лицензия на установку интегрированных шрифтов в компьютере, на котором ведется редактирование. В случае загрузки
настоящего файла заинтересованные стороны принимают на себя ответственность за соблюдение лицензионных условий
фирмы Adobe. Центральный секретариат ISO не несет никакой ответственности в этом отношении.
Adobe - торговый знак Adobe Systems Incorporated.
Подробности, относящиеся к программным продуктам, использованным для создания настоящего файла PDF, можно найти в
рубрике General Info файла; параметры создания PDF оптимизированы для печати. Были приняты во внимание все меры
предосторожности с тем, чтобы обеспечить пригодность настоящего файла для использования комитетами – членами ISO. В
редких случаях возникновения проблемы, связанной со сказанным выше, просим информировать Центральный секретариат по
адресу, приведенному ниже.



ДОКУМЕНТ ЗАЩИЩЕН АВТОРСКИМ ПРАВОМ


©  ISO 2010
Все права сохраняются. Если не задано иначе, никакую часть настоящей публикации нельзя копировать или использовать в
какой-либо форме или каким-либо электронным или механическим способом, включая фотокопии и микрофильмы, без
предварительного письменного согласия офиса ISO по адресу, указанному ниже, или членов ISO в стране регистрации
пребывания.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Опубликовано в Швейцарии

ii © ISO 2010 – Все права сохраняются

---------------------- Page: 2 ----------------------
ISO 8566-3:2010(R)
Предисловие
Международная организация по стандартизации (ISO) является всемирной федерацией национальных
организаций по стандартизации (комитетов-членов ISO). Разработка международных стандартов
обычно осуществляется техническими комитетами ISO. Каждый комитет-член, заинтересованный в
деятельности, для которой был создан технический комитет, имеет право быть представленным в
этом комитете. Международные правительственные и неправительственные организации, имеющие
связи с ISO, также принимают участие в работах. Что касается стандартизации в области
электротехники, то ISO работает в тесном сотрудничестве с Международной электротехнической
комиссией (IEC).
Проекты международных стандартов разрабатываются в соответствии с правилами Директив ISO/IEC,
Часть 2.
Основной задачей технических комитетов является подготовка международных стандартов. Проекты
международных стандартов, принятые техническими комитетами, рассылаются комитетам-членам на
голосование. Их опубликование в качестве международных стандартов требует одобрения не менее
75 % комитетов-членов, принимающих участие в голосовании.
Следует иметь в виду, что некоторые элементы настоящего международного стандарта могут быть
объектом патентных прав. Международная организация по стандартизации не может нести
ответственность за идентификацию какого-либо одного или всех патентных прав.
ISO 8566-3 подготовил Технический комитет ISO/TC 96, Краны грузоподъемные, Подкомитет SC 7,
Башенные краны.
Настоящее второе издание отменяет и замещает первое (ISO 8566-3:1992), которое технически
пересмотрено.
ISO 8566 состоит из следующих частей под общим заголовком Краны грузоподъемные. Кабины и
посты управления:
Часть 1. Общие положения
Часть 2. Самоходные краны
Часть 3. Башенные краны
Часть 4. Консольные краны
Часть 5: Мостовые краны и портальные мостовые краны

© ISO 2010 – Все права сохраняются iii

---------------------- Page: 3 ----------------------
МЕЖДУНАРОДНЫЙ СТАНДАРТ ISO 8566-3:2010(R)

Краны грузоподъемные. Кабины и посты управления
Часть 3.
Башенные краны
1 Область применения
Настоящая часть ISO 8566 задает общие требования для кабин и постов управления башенных
грузоподъемных кранов согласно определению в ISO 4306-3. Она предназначается для использования
совместно с ISO 8566-1.
2 Нормативные ссылки
Следующие ссылочные документы являются обязательными для применения настоящего документа.
Для устаревших ссылок применяется только цитируемое издание. Для недатированных ссылок
применяется самое последнее издание ссылочного документа (включая поправки).
ISO 4306-3, Краны грузоподъемные. Словарь. Часть 3. Башенные краны
ISO 7752-3, Краны грузоподъемные. Расположение и характеристика органов управления. Часть 3.
Башенные краны
ISO 8566-1:2010, Краны грузоподъемные. Кабины и посты управления. Ч
...

INTERNATIONAL ISO
STANDARD 8566-3
Second edition
2010-02-01


Cranes — Cabins and control stations —
Part 3:
Tower cranes
Appareils de levage à charge suspendue — Cabines et postes de
conduite —
Partie 3: Grues à tour





Reference number
ISO 8566-3:2010(E)
©
ISO 2010

---------------------- Page: 1 ----------------------
ISO 8566-3:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2010 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8566-3:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 8566-3 was prepared by Technical Committee ISO/TC 96, Cranes, Subcommittee SC 7, Tower cranes.
This second edition cancels and replaces the first edition (ISO 8566-3:1992), which has been technically
revised.
ISO 8566 consists of the following parts, under the general title Cranes — Cabins and control stations:
⎯ Part 1: General
⎯ Part 2: Mobile cranes
⎯ Part 3: Tower cranes
⎯ Part 4: Jib cranes
⎯ Part 5: Overhead travelling and portal bridge cranes
© ISO 2010 – All rights reserved iii

---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 8566-3:2010(E)

Cranes — Cabins and control stations —
Part 3:
Tower cranes
1 Scope
This part of ISO 8566 specifies the requirements for cabins and control stations for tower cranes as defined in
ISO 4306-3. It is intended to be used in conjunction with ISO 8566-1.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 4306-3, Cranes — Vocabulary — Part 3: Tower cranes
ISO 7752-3, Cranes — Controls — Layout and characteristics — Part 3: Tower cranes
ISO 8566-1:2010, Cranes — Cabins and control stations — Part 1: General
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 4306-3 and ISO 8566-1 apply.
4 Control station
The requirements given in ISO 8566-1 apply, with the following modifications.
If a control st
...

SLOVENSKI STANDARD
SIST ISO 8566-3:2012
01-oktober-2012
1DGRPHãþD
SIST ISO 8566-3:1997
Žerjavi - Kabine in kontrolne postaje - 3. del: Stolpni žerjavi
Cranes - Cabins and control stations - Part 3: Tower cranes
Appareils de levage à charge suspendue - Cabines et postes de conduite - Partie 3:
Grues à tour
Ta slovenski standard je istoveten z: ISO 8566-3:2010
ICS:
53.020.20 Dvigala Cranes
SIST ISO 8566-3:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 8566-3:2012

---------------------- Page: 2 ----------------------

SIST ISO 8566-3:2012

INTERNATIONAL ISO
STANDARD 8566-3
Second edition
2010-02-01


Cranes — Cabins and control stations —
Part 3:
Tower cranes
Appareils de levage à charge suspendue — Cabines et postes de
conduite —
Partie 3: Grues à tour





Reference number
ISO 8566-3:2010(E)
©
ISO 2010

---------------------- Page: 3 ----------------------

SIST ISO 8566-3:2012
ISO 8566-3:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2010 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 8566-3:2012
ISO 8566-3:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 8566-3 was prepared by Technical Committee ISO/TC 96, Cranes, Subcommittee SC 7, Tower cranes.
This second edition cancels and replaces the first edition (ISO 8566-3:1992), which has been technically
revised.
ISO 8566 consists of the following parts, under the general title Cranes — Cabins and control stations:
⎯ Part 1: General
⎯ Part 2: Mobile cranes
⎯ Part 3: Tower cranes
⎯ Part 4: Jib cranes
⎯ Part 5: Overhead travelling and portal bridge cranes
© ISO 2010 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 8566-3:2012

---------------------- Page: 6 ----------------------

SIST ISO 8566-3:2012
INTERNATIONAL STANDARD ISO 8566-3:2010(E)

Cranes — Cabins and control stations —
Part 3:
Tower cranes
1 Scope
This part of ISO 8566 specifies the requirements for cabins and control stations for tower cranes as defined in
ISO 4306-3. It is intended to be used in conjunction with ISO 8566-1.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) app
...

NORME ISO
INTERNATIONALE 8566-3
Deuxième édition
2010-02-01


Appareils de levage à charge
suspendue — Cabines et postes
de conduite —
Partie 3:
Grues à tour
Cranes — Cabins and control stations —
Part 3: Tower cranes





Numéro de référence
ISO 8566-3:2010(F)
©
ISO 2010

---------------------- Page: 1 ----------------------
ISO 8566-3:2010(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


DOCUMENT PROTÉGÉ PAR COPYRIGHT


©  ISO 2010
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2010 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 8566-3:2010(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 8566-3 a été élaborée par le comité technique ISO/TC 96, Appareils de levage à charge suspendue,
sous-comité SC 7, Grues à tour.
Cette deuxième édition annule et remplace la première édition (ISO 8566-3:1992), qui a fait l'objet d'une
révision technique.
L'ISO 8566 comprend les parties suivantes, présentées sous le titre général Appareils de levage à charge
suspendue — Cabines et postes de conduite:
⎯ Partie 1: Généralités
⎯ Partie 2: Grues mobiles
⎯ Partie 3: Grues à tour
⎯ Partie 4: Grues à flèche
⎯ Partie 5: Ponts roulants et ponts portiques
© ISO 2010 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
NORME INTERNATIONALE ISO 8566-3:2010(F)

Appareils de levage à charge suspendue — Cabines et postes
de conduite —
Partie 3:
Grues à tour
1 Domaine d'application
La présente partie de l'ISO 8566 spécifie les exigences auxquelles doivent satisfaire les cabines et postes de
conduite des grues à tour telles que définies dans l'ISO 4306-3. La présente partie est destinée à être utilisée
conjointement avec l'ISO 8566-1.
2 Références normatives
Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les
références datées, seule l'édition citée s'applique. Pour les références non datées, la dernière édition du
document de référence s'applique (y compris les éventuels amendements).
ISO 4306-3, Appareils de levage à charge suspendue — Vocabulaire — Partie 3: Grues à tour
ISO 7752-3, Appareils de levage à charge suspendue — Organes de service — Disposition et
caractéristiques — Partie 3: Grues à tour
ISO 8566-1:2010, Appareils de levage à charge suspendue — Cabines et postes de conduite — Partie 1:
Généralités
3 Termes et définitions
Pour les besoins du présent document, les termes et définitions donnés dans l'ISO 4306-3 et l'ISO 8
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.