SIST EN 15432:2008
(Main)Winter and road service area maintenance equipments - Front-mounted equipments - Interchangeability
Winter and road service area maintenance equipments - Front-mounted equipments - Interchangeability
This European Standard specifies the requirements for the various elements of carrying vehicles to ensure interchangeability between a vehicle and different equipments that are frontally mounted. It specifies certain interchangeability dimensions of the front mounting plate, including its height above the ground, as well as the locations of coupling devices for electrical and hydraulic connections and for mechanical power take off (PTO).
This European Standard specifies two different classes of mounting plates in order to cover road vehicles, having a maximum design total mass higher than 3,5 t, of the greatest possible variety (commercial vehicles, multi purpose vehicles, communal vehicles, …), which are capable of carrying front mounted equipments for winter maintenance and for road service area maintenance.
This European Standard specifies, with regard to electrical and hydraulic connections and to PTO, only location areas, clearance spaces and preferred layout in order to ensure interchangeability. Requirements applying to connectors, coupling devices and PTO splines are given in prEN 15431.
Normative Annex A specifies provisions for an advanced front coupling system that is able to allow for mounting and demounting equipments without the use of tools. Users having to address specific needs (e.g. extreme weather conditions) may require the vehicle be fitted with such automatic coupling system.
Normative Annex B gives provisions for a compact and light front mounting plate intended for combined road and off road applications.
Winterdienst- und Straßenbetriebsdienstausstattung - Mechanische Schnittstelle an Fahrzeugen für frontangebaute Maschinen - Austauschbarkeit
Diese Europäische Norm legt Anforderungen von an Trägerfahrzeugen angebauten Komponenten fest, um die Austauschbarkeit zwischen einem Fahrzeug und verschiedenen an der Fahrzeugfront angebauten Maschinen und Geräten zu gewährleisten. Sie definiert verschiedene für die Austauschbarkeit relevante Maße der Frontanbauplatte einschließlich der Höhe über dem Boden sowie die Anbaupositionen von Kupplungseinrichtungen für elektrische und hydraulische Anschlüsse und für mechanische Zapfwellen.
Diese Europäische Norm legt zwei verschiedene Klassen von Anbauplatten fest für Straßenfahrzeuge mit einem Gesamtgewicht größer als 3,5 t und vielfältigen Bauarten (gewerbliche Fahrzeuge, Mehrzweck-fahrzeuge, Kommunalfahrzeuge,...), die Frontanbaumaschinen und geräte für den Winterdienst und den Straßenbetriebsdienst tragen können.
Diese Europäische Norm legt für elektrische und hydraulische Anschlüsse und die Zapfwelle nur die Anbaupositionen und Freiräume fest um Austauschbarkeit zu gewährleisten. Die Anforderungen an die Ausführung und Bauart der Anschlüsse und Zapfwellenprofile werden in der prEN 15431 definiert.
Der normative Anhang A legt die Anforderungen an ein weiterentwickeltes Frontanbausystem fest, bei welchem Anbaumaschinen und –geräte ohne Werkzeug an- oder abgebaut werden können. Anwender mit speziellen Einsatzbedingungen (z. B. bei extremen Wetterbedingungen) können fordern, dass das Fahrzeug mit einem derartigen Schnellwechselsystem auszurüsten ist.
Der normative Anhang B legt die Anforderungen an eine kompakte und leichte Frontanbauplatte fest, die für den kombinierten Einsatz auf der Straße und im Gelände konzipiert ist.
Matériels de viabilité hivernale et d'entretien des dépendances routieres - Matériels montés a l'avant - Interchangeabilité
Le présent document spécifie les exigences relatives aux divers éléments des véhicules porteurs permettant d’assurer l’interchangeabilité entre un véhicule et différents matériels devant etre montés a l’avant. Il spécifie certaines dimensions intercheangeables de la plaque de base avant, y compris sa hauteur au-dessus du sol, ainsi que les emplacements des dispositifs de couplage des liaisons électriques et hydrauliques et de la prise de force (p.d.f) mécanique.
Le présent document spécifie deux classes différentes de plaques de base, ceci afin de couvrir les véhicules routiers dont la masse maximale totale calculée est supérieure a 3,5 t, de la plus grande variété possible (véhicules utilitaires, véhicules multi-usages, véhicules communaux, etc.) et ou peuvent etre montés a l’avant des matériels de viabilité hivernale et d’entretien des dépendances routieres.
Le présent document spécifie uniquement les zones d’emplacement, les zones de dégagement et la disposition recommandée des liaisons électriques et hydrauliques et de la prise de force pour assurer l’interchangeabilité. Les exigences applicables aux connecteurs, aux dispositifs de couplage et aux cannelures de la prise de force sont données dans l’EN 15431.
L’Annexe normative A spécifie les dispositions relatives a un systeme de couplage avant de pointe qui permet de monter et de démonter des matériels sans l’aide d’outils. Les utilisateurs dont les besoins sont spécifiques (conditions météorologiques extremes par exemple) peuvent avoir besoin d’un véhicule équipé d’un systeme de couplage automatique de ce type.
L’Annexe normative B spécifie les dispositions relatives a une plaque de base compacte et légere spécialement destinée aux applications hors route.
Oprema za vzdrževalna dela zimske službe in službe za vzdrževanje cest - Oprema za namestitev na sprednji del vozila - Zamenljivost
Ta evropski standard opredeljuje zahteve za različne elemente vozil za zagotavljanje zamenljivosti med vozilom in različno opremo, ki se namesti na sprednji del vozila. Opredeljuje določene dimenzije zamenljivosti plošče za namestitev na sprednji del vozila, vključno z njeno višino nad tlemi, kot tudi lokacije priklopnih naprav za električne in hidravlične povezave in za mehanski odjem moči (PTO). Ta evropski standard opredeljuje dva različna razreda plošč za montažo, z namenom pokriti cestna vozila z najvišjo načrtovano skupno maso, višjo od 3,5 t, največje možne raznolikosti (komercialna vozila, večnamenska vozila, komunalna vozila, ), ki so zmožna prevažati opremo za namestitev na sprednji del vozila za vzdrževalna dela zimske službe in službe za vzdrževanje cest. Ta evropski standard opredeluje, glede na električne in hidravlične povezave in odjem moči, le lokacijska območja, območje čiščenja in preferenčno ureditev, da bi zagotovili zamenljivost. Zahteve, ki se nanašajo na vezne elemente, priklopne naprave in utorne gredi za odjem moči so podane v EN 15431. Normativni Dodatek A podaja določbe za izpopolnjen sistem priklopa na sprednji strani vozila, ki omogoča montažo in demontažo opreme brez uporabe orodja. Uporabniki, ki se morajo ukvarjati s posebnimi potrebami (npr. izredne vremenske razmere), bodo morda morali vozilo opremiti s takšnim avtomatskim priklopnim sistemom. Normativni Dodatek B podaja določbe za kompaktno in lahko ploščo za namestitev na sprednji del vozila, ki je namenjena kombinirani cestni in terenski uporabi.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Winter and road service area maintenance equipments - Front-mounted equipments - InterchangeabilityOprema za vzdrževalna dela zimske službe in službe za vzdrževanje cest - Oprema za namestitev na sprednji del vozila - ZamenljivostMatériels de viabilité hivernale et d'entretien des dépendances routieres - Matériels montés a l'avant - InterchangeabilitéWinterdienst- und Straßenbetriebsdienstausstattung - Mechanische Schnittstelle an Fahrzeugen für frontangebaute Maschinen - AustauschbarkeitTa slovenski standard je istoveten z:EN 15432:2008SIST EN 15432:2008en,fr,de43.160ICS:SLOVENSKI
STANDARDSIST EN 15432:200801-april-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15432January 2008ICS 43.160 English VersionWinter and road service area maintenance equipments - Front-mounted equipments - InterchangeabilityMatériels de viabilité hivernale et d'entretien desdépendances routières - Matériels montés à l'avant -InterchangeabilitéWinterdienst- und Straßenbetriebsdienstausstattung -Mechanische Schnittstelle an Fahrzeugen fürfrontangebaute Maschinen - AustauschbarkeitThis European Standard was approved by CEN on 21 October 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15432:2008: E
EN 15432:2008 (E)
2 Contents Foreword.3 1 Scope.4 2 Normative references.4 3 Interchangeability requirements.4 3.1 Front mounting plate.4 3.1.1 General provisions.4 3.1.2 Mounting plate classes.5 3.1.3 Strength requirements.5 3.1.4 Designation.6 3.1.5 Interchangeability dimensions.6 3.1.6 Tool fixing systems.9 3.2 Electrical and hydraulic connections.9 3.2.1 General.9 3.2.2 Location on the vehicle.10 3.2.3 Clearance space.12 3.2.4 Connection types.13 3.2.5 Identification and preferred layout of hydraulic connections.13 3.3 Mechanical Power Take Off (PTO).14 Annex A
(normative)
Quick-coupling VV95 system for front mounted equipments.16 A.1 General.16 A.2 Interchangeability requirements.16 A.2.1 Front mounting plate.16 A.2.2 Electrical and hydraulic connections.19 A.2.3 Mechanical Power Take Off (PTO).20 Annex B
(normative)
Compact F1/C front mounting plate for combined road and off-road applications.21 B.1 General.21 B.2 Interchangeability requirements – Front Mounting Plate.21 B.2.1 General provisions.21 B.2.2 Mounting plate class.21 B.2.3 Strength requirements.21 B.2.4 Designation.21 B.2.5 Interchangeability dimensions.22 B.2.6 Tool fixing systems.23 Bibliography.24
EN 15432:2008 (E) 3 Foreword This document (EN 15432:2008) has been prepared by CEN/TC 337/WG 3 "Interface between tools and vehicle", the secretariat of which is held by UNI-CUNA, under the direction of Technical Committee CEN/TC 337 "Winter maintenance and road service area maintenance equipment", the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2008, and conflicting national standards shall be withdrawn at the latest by July 2008. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 15432:2008 (E)
4 1 Scope This European Standard specifies the requirements for the various elements of carrying vehicles to ensure interchangeability between a vehicle and different equipments that are frontally mounted. It specifies certain interchangeability dimensions of the front mounting plate, including its height above the ground, as well as the locations of coupling devices for electrical and hydraulic connections and for mechanical power take off (PTO). This European Standard specifies two different classes of mounting plates in order to cover road vehicles, having a maximum design total mass higher than 3,5 t, of the greatest possible variety (commercial vehicles, multi-purpose vehicles, communal vehicles, …), which are capable of carrying front-mounted equipments for winter maintenance and for road service area maintenance. This European Standard specifies, with regard to electrical and hydraulic connections and to PTO, only location areas, clearance spaces and preferred layout in order to ensure interchangeability. Requirements applying to connectors, coupling devices and PTO splines are given in EN 15431. Normative Annex A specifies provisions for an advanced front coupling system that is able to allow for mounting and demounting equipments without the use of tools. Users having to address specific needs (e.g. extreme weather conditions) may require the vehicle be fitted with such automatic coupling system. Normative Annex B gives provisions for a compact and light front mounting plate intended for combined road and off-road applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15431, Winter and road service area maintenance equipments – Power system and related controls – Interchangeability and performance requirements
3 Interchangeability requirements 3.1 Front mounting plate 3.1.1 General provisions Mounting plates of all classes, as defined in following 3.1.2, shall be designed and installed to the carrying vehicle to allow for safe and easy tilting of the cabin (if the vehicle has been designed to provide for this facility). Mounting plates of all classes, as defined in following 3.1.2, shall be designed and installed to the carrying vehicle so as to allow for mounting a front towing hitch (if the vehicle has been designed to provide for this facility). Compliance to this requirement may be achieved in different ways, e.g. by a pivoting or folding mounting plate, by an appropriate non-obstructing design or by provisions for direct mounting of the hitch to the mounting plate itself. Characteristics of the quick-coupling system designed to allow for mounting and demounting of equipments without the use of tools are given in Annex A. Characteristics of the compact mounting plate designed for combined road and off-road applications are given in Annex B.
EN 15432:2008 (E) 5 3.1.2 Mounting plate classes Table 1 gives indications on installation heights and on the recommended range of the maximum design total mass (ISO-M07, item 4.7 of ISO 1176:1990) of the carrying vehicle for each of the two classes of mounting plates that are defined in this European Standard. The installation height is measured with the carrying vehicle being at kerb mass (ISO-M06, item 4.6 of ISO 1176:1990) from the ground to the upper edge of the mounting plate, as shown in Figure 2 and Figure 3. Table 1 — Installation heights of mounting plate classes Mounting plate class Height
mm Recommended range of carrying vehicle maximum design total mass 1) t F 1 1 000 ± 60 ≥ 7,5 F 2 870 ± 50 ≥ 3,5 and ≤ 9 1) When mounting plates of classes F1 and F2 are being mounted on vehicles, which are not covered by ISO 1176, recommended ranges as given in the table may not be applicable.
3.1.3 Strength requirements Mounting plates shall be designed to withstand to the maximum loads and moments that are given in Table 2 for each appropriate class. The values given in Table 2 refer to static loads and moments applied by the greatest variety of equipments (e.g. snow plough, grass cutting machine …) that may be fixed on the mounting plate. Equipments apply static loads and moment when they are being held in a raised position for transportation and transfer purposes. Table 2 — Maximum static loads Mounting plate class Vertical load, Fz kN Bending moment, My kNm Torsional moment, Mx kNm F 1 22 22 45 F 2 12 12 18
Loads and moments given in Table 2 refer to the vehicle coordinate system as shown in Figure 1. Mounting plates shall also be able to withstand to foreseeable dynamic forces which may arise when working with equipments having maximum static loads shown in Table 2.
EN 15432:2008 (E)
6
Figure 1 — Vehicle coordinate system 3.1.4 Designation Mounting plates meeting the requirements of this European Standard shall be identified by the following information, in the order given: a) reference to this European Standard (EN 15432:2008); b) indication of the mounting plate class. EXAMPLE Mounting plate of class F 2:
Mounting plate EN 15432 F 2 3.1.5 Interchangeability dimensions Interchangeability dimensions of mounting plates shall be according to: — Figure 2 for Class F 1 mounting plates; — Figure 3 for Class F 2 mounting plates. Dimensions not specified in Figure 2 and Figure 3 are left to the discretion of the manufacturer.
EN 15432:2008 (E) 7 Dimensions in millimetres
Key 1 clearance for claw 2 clearance for swivel bolts 3 clearance for swivel bolt 4 clearance for passing bolt 5 cone 6 clearance for centring cone NOTE 1 Additional cut-outs are allowed if the stiffness is not reduced thereby. NOTE 2 Additional elements, which do not conflict with the characteristic dimensions, may be provided to couple in-use implements using different fixing systems. Figure 2 — Dimensions for F 1 mounting plates
EN 15432:2008 (E)
8 Dimensions in millimetres
Key 1 clearance for claw 2 clearance for swivel bolt 3 clearance for swivel bolt 4 cone 5 clearance for centring cone NOTE 1 Additional cut-outs are allowed if the stiffness is not reduced thereby. NOTE 2 Additional elements, which do not conflict with the characteristic dimensions, may be provided to couple in-use implements using different fixing systems. Figure 3 — Dimensions for F 2 mounting plates
EN 15432:2008 (E) 9 3.1.6 Tool fixing systems 3.1.6.1 General To ensure interchangeability with tools already in use, mounting plates defined in this European Standard are
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.