SIST EN 1523:2000
(Main)Windows, doors, shutters and blinds - Bullet resistance - Test method
Windows, doors, shutters and blinds - Bullet resistance - Test method
This European Standard specifies a test procedure to permit classification of the bullet resistance of windows, doors, shutters and blinds (complete with their infills). This European Standard concerns only behavior in respect of the frame of the windows, doors, shutters or blind, their infills and the junctions between the infills and frames. If the windows and doors are subjected to specific conditions of climate, specific conditions of test may be required. It does not apply to the testing of glass infills. For the testing of glass infills refer to prEN 1063.
Fenster, Türen, Abschlüsse - Durchschußhemmung - Prüfverfahren
Diese Europäische Norm legt das Prüfverfahren zur Klassifizierung der Durchschußhemmung von Fenstern, Türen, zusätzlichen Abschlüssen und Schutzeinrichtungen (einschließlich deren Füllungen) fest. Diese Europäische Norm betrifft nur das Verhalten der Rahmenkonstruktion von Fenstern, Türen, zusätzlichen Abschlüssen und Schutzeinrichtungen, deren Füllungen und den Anschlußbereich zwischen Füllung und Rahmen. Falls die Fenster und Türen extremen Klimabedingungen ausgesetzt werden, so dürfen diese auch für die Prüfung gefordert werden.
Fenetres, portes, fermetures et stores - Résistance aux balles - Méthode d'essai
La présente norme européenne spécifie un mode opératoire d'essai permettant la classification de la résistance aux balles des fenêtres, portes, fermetures et stores (et de leurs remplissages). La présente norme ne concerne que le comportement propre du châssis des fenêtres, portes, fermetures et stores, de leurs remplissages et des liaisons entre remplissages et châssis Si les fenêtres et les portes sont soumises à des conditions climatiques spécifiques, des conditions spécifiques d'essai peuvent être exigées. Elle ne s'applique pas à l'essai des remplissages en produits verriers qui relèvent du prEN 1063.
Okna, vrata, polkna in rolete - Odpornost proti izstrelkom iz strelnega orožja - Preskusne metode
General Information
Overview
EN 1523:1998 - Windows, doors, shutters and blinds - Bullet resistance - Test method (CEN) specifies a standardized test procedure to permit classification of bullet resistance for complete window, door, shutter and blind assemblies (including their infills). The standard addresses the behavior of the frame, infills and the junctions between them under ballistic impact. It does not cover the testing of glass infills (see prEN 1063 for glass). Where windows and doors are intended for specific climatic conditions, EN 1523 notes that specific test conditions may be required.
Key Topics
- Scope and purpose: Defines a repeatable test method to classify the ballistic resistance of complete assemblies (frames + infills).
- Test object: Applies to windows, doors, shutters and blinds supplied complete with their infills - emphasis on assemblies rather than isolated components.
- Behavior assessed: Focus on the structural response of frames, infills and junctions (connections and seals) to projectile impact.
- Exclusions: Glass infills are excluded from EN 1523; testing of glazing is referenced to prEN 1063.
- Environmental considerations: Acknowledges that specific climatic conditions (temperature, humidity, aging) may necessitate adjusted test conditions prior to ballistic testing.
- Classification outcome: The procedure permits assignment of a bullet resistance classification that can be used for specification, procurement and comparison.
Applications
- Manufacturers of security windows, doors, shutters and blinds - to validate and classify product ballistic performance.
- Independent test laboratories - to perform standardized ballistic testing and produce certification or test reports.
- Architects and specifiers - to select appropriately classified assemblies for high-risk or secure facilities.
- Procurement teams and building owners - to define performance requirements for protective openings in government, financial, diplomatic, transport and critical infrastructure projects.
- Security consultants and risk assessors - to recommend assemblies that meet threat-level specifications.
Related Standards
- prEN 1063 - referenced for testing of glass infills (ballistic resistance of glazing).
- Organization: CEN (European Committee for Standardization).
EN 1523 is a practical standard for anyone specifying, testing or certifying the ballistic resistance of non‑glazed aspects of window and door assemblies. Keywords: EN 1523, bullet resistance, windows doors shutters blinds, ballistic test method, frame infill junctions, prEN 1063, CEN.
Frequently Asked Questions
SIST EN 1523:2000 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Windows, doors, shutters and blinds - Bullet resistance - Test method". This standard covers: This European Standard specifies a test procedure to permit classification of the bullet resistance of windows, doors, shutters and blinds (complete with their infills). This European Standard concerns only behavior in respect of the frame of the windows, doors, shutters or blind, their infills and the junctions between the infills and frames. If the windows and doors are subjected to specific conditions of climate, specific conditions of test may be required. It does not apply to the testing of glass infills. For the testing of glass infills refer to prEN 1063.
This European Standard specifies a test procedure to permit classification of the bullet resistance of windows, doors, shutters and blinds (complete with their infills). This European Standard concerns only behavior in respect of the frame of the windows, doors, shutters or blind, their infills and the junctions between the infills and frames. If the windows and doors are subjected to specific conditions of climate, specific conditions of test may be required. It does not apply to the testing of glass infills. For the testing of glass infills refer to prEN 1063.
SIST EN 1523:2000 is classified under the following ICS (International Classification for Standards) categories: 13.310 - Protection against crime; 91.060.50 - Doors and windows. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1523:2000 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 1523:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Okna, vrata, polkna in rolete - Odpornost proti izstrelkom iz strelnega orožja - Preskusne metodeFenster, Türen, Abschlüsse - Durchschußhemmung - PrüfverfahrenFenetres, portes, fermetures et stores - Résistance aux balles - Méthode d'essaiWindows, doors, shutters and blinds - Bullet resistance - Test method91.060.50Vrata in oknaDoors and windows13.310Varstvo pred kriminalomProtection against crimeICS:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...