CEN/TC 361 - Project Committee - Thick synthetic modified bitumous coating masses - Definitions and requirements/Test methods

This European Standard specifies the definitions and requirements of prefabricated polymer modified bituminous thick coatings used for the waterproofing of below ground structures. It applies to both one-component and two-component products. These products can be used with or without inlay.
This European Standard does not apply to products that are to be used for roof waterproofing.

This European Standard specifies two methods (method A and method B) for determining the crack bridge properties of polymer modified bituminous thick coatings for waterproofing. The two test methods may be applied equally.

This European Standard specifies a procedure for determining the reduction in the thickness of polymer modified bituminous thick coatings due to drying for waterproofing.

This European Standard specifies a procedure for determining the dimensional stability at a high temperature of polymer modified bituminous thick coatings for waterproofing.

This European Standard specifies a procedure for determining the flexibility of polymer modified bituminous thick coatings for waterproofing at low temperature.

This European Standard specifies a procedure for determining the water resistance of polymer modified bituminous thick coatings for waterproofing.

This European Standard specifies a procedure for determining the watertightness of polymer modified bituminous thick coatings for waterproofing (i.e. the resistance to hydraulic pressure).

This European Standard specifies a procedure for determining the resistance to rain of polymer modified bituminous thick coatings for waterproofing.

This European Standard specifies a procedure for determining the resistance to compression of polymer modified bituminous thick coatings for waterproofing.

This European Standard specifies the definitions and requirements of prefabricated polymer modified bituminous thick coatings used for the waterproofing of below ground structures. It applies to both one-component and two-component products. These products can be used with or without inlay. This European Standard does not apply to products that are to be used for roof waterproofing.

This European Standard specifies the definitions and requirements of prefabricated polymer modified bituminous thick coatings used for the waterproofing of below ground structures. It applies to both one-component and two-component products. These products can be used with or without inlay. This European Standard does not apply to products that are to be used for roof waterproofing.

This European Standard specifies the definitions and requirements of prefabricated polymer modified bituminous thick coatings used for the waterproofing of below ground structures. It applies to both one-component and two-component products. These products can be used with or without inlay. This European Standard does not apply to products that are to be used for roof waterproofing.

This European Standard specifies the definitions and requirements of prefabricated polymer modified
bituminous thick coatings used for the waterproofing of below ground structures. It applies to both onecomponent
and two-component products. These products can be used with or without inlay.
This European Standard does not apply to products that are to be used for roof waterproofing.