ASD-STAN/D 2 - Electrical

This document specifies the dimensions, linear resistance, mechanical characteristics, construction and mass of conductors in aluminium or aluminium alloy for electrical cables for aerospace applications.
It applies to stranded conductors with nominal cross-sections of 5 mm2 to 115 mm2 inclusive.

This document specifies the characteristics of three-pole circuit breakers, temperature compensated with a rated current from 1 A to 25 A, used in aircraft on-board circuits at a temperature between
-55 °C and 125 °C for ratings ≤ 15 A and -55 °C to 90 °C for ratings > 15 A and at an altitude of 22 000 m max.
These circuit breakers are operated by a push-pull type single pushbutton (actuator), with delayed action "trip-free" tripping with a signal contact which is open when main contacts are closed, and inversely.
They will continue to function up to the short-circuit current.

This document specifies the characteristics of three-pole circuit breakers, temperature compensated with a rated current from 1 A to 25 A, used in aircraft on-board circuits at a temperature between −55 °C and 125 °C for ratings ≤ 15 A and −55 °C and 90 °C for ratings > 15 A and at an altitude of 22 000 m max.
These circuit breakers are operated by a push-pull type single push button (actuator), with delayed action “trip-free” tripping with a polarized signal contact which is open when main contacts are closed, and inversely.
They will continue to function up to the short-circuit current.

This document specifies a method of determining the ability of elements of connection to withstand sinusoidal or random vibrations of specified severities.
It is used together with EN 2591-100.
This test is based on EN 60068-2-6 and EN 60068-2-64.

This document specifies the test methods to evaluate the performance of coaxial, quadrax and databus cables after the installation of plastic cable ties.
It is expected to be used together with EN 3475 100.

This document specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 62,5 µm/125 µm graded index fibre nominal, 1,8 mm outside diameter and of semi-loose buffer construction.

This document specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 62,5 µm/125 µm simplex fibre, 2,74 mm outside cable diameter and of semi-loose construction. The basic construction is the cable specified in EN 4641-102 with added sheaths for ruggedized usages.

This document specifies the dimensions, tolerances, required characteristics and the mass of an AWG 24 shielded quad cable, type KL, intended for high speed (100 Mbit/s) full duplex Ethernet networks.
Linked to this particular application, the operating temperatures of the cable are between −65 °C and 125 °C.
This cable is laser markable, this marking satisfies the requirements of EN 3838.
The characteristics impedance is 100 Ω ± 15 Ω.

This document specifies the required characteristics and tests applicable to sealing sleeves used in elements of connection according to EN 3155 002 and EN 4530-002.

This document specifies:
-   the electrical, mechanical, environmental and dimensional characteristics of electrical contacts used in elements of connection, including coaxial, triaxial and quadrax contacts;
-   the conditions for qualification, acceptance testing and quality assurance;
-   the test programs and groups.
It is applicable to removable crimp contacts, wrap contacts, solder contacts used in connectors or in other elements of electrical connection.
In case of conflict or missing information between the EN 3155-001 and the product standards, the product standard takes precedence.

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 009, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-008.

This document specifies a method for checking the variation of attenuation of an optical cable during temperature cycling.

This document specifies the characteristics of UV laser printable electrical lightweight wires ADA family for use in the on-board 115 V (phase to neutral) or 200 V (phase-to-phase) AC, 28 VDC electrical systems of aircraft at operating temperatures between −65 °C and 180 °C. These cables are demonstrated to be arc resistant in sizes AWG 26 to 14 (115 VAC/200 VAC).
In addition, these cables can be suitable for use at 230 VAC/400 VAC in pressurized zones only when installed to take account of possible short circuit effects.
Other electrical system configurations are the responsibility of the users.
It is also possible to mark these cables by qualified compatible marking which satisfies the requirements of EN 3838:2022.

This document specifies the list of product standards and common characteristics of electrical cables for general purpose with conductors in aluminium or copper-clad aluminium, intended for installation in aircraft electrical systems.

This document specifies the characteristics of UV laser printable electrical lightweight wires AD family for use in the on-board 115 V (phase to neutral) or 200 V (phase to phase) AC, 28 VDC electrical systems of aircraft at operating temperatures between −65 °C and 180 °C. These cables are demonstrated to be arc resistant in sizes AWG 24 to 14 (115 VDC/200 VDC).
In addition, these cables can be suitable for use at 230 VAC/400 VAC in pressurized zones only when installed to take account of possible short circuit effects.
Other electrical system configurations are the responsibility of the users.
It is also possible to mark these cables by qualified compatible marking which satisfies the requirements of EN 3838:2022.

This document specifies the single-pole temperature compensated circuit breakers rated from 1 A to 25 A and used in aircraft on-board circuits. It describes specific environmental, electrical and mechanical characteristics and the stringency of tests to be applied according to test methods of EN 3841-100.
These circuit breakers are intended for use in aircraft with electrical supplies in accordance with EN 2282.

This document specifies the three-pole temperature compensated circuit breakers, rated from 1 A to 25 A used in aircraft on-board circuits. It describes specific environmental, electrical and mechanical characteristics and the stringency of tests to be applied according to test methods of EN 3841 100.
These circuit breakers are intended for use in aircraft with electrical supplies in accordance with EN 2282.

This document specifies the test methods to evaluate the wicking of wire and cable insulated with textile braid.
It is intended to be used together with EN 3475-100.

This document specifies the characteristics of UV laser printable DR family, 1 to 11 cores, taped, screened (braided) and jacketed electrical lightweight cables for use in the on-board electrical systems of aircraft, at operating temperatures between −55 °C and 260 °C. Nevertheless, if needed, −65 °C is also acceptable as shown by cold test.
It is possible to mark these cables by qualified compatible marking, in line with EN 3838.

This document specifies the single-pole temperature compensated circuit breakers with signal contacts, polarized or not, rated from 20 A to 50 A and used in aircraft on-board circuits. It describes specific environmental, electrical and mechanical characteristics and the stringency of tests to be applied according to test methods of EN 3841-100.
These circuit breakers are intended for use in aircraft with electrical supplies in accordance with EN 2282 (all parts).

This document specifies a method to measure the ability of a protective sleeve to withstand specified severities of simulated lightning strikes.

This document specifies the three-pole temperature compensated circuit breakers with signal contacts, polarized or not, rated from 20 A to 50 A and used in aircraft on-board circuits. It describes specific environmental, electrical and mechanical characteristics and the stringency of tests to be applied according to test methods of EN 3841-100.
These circuit breakers are intended for use in aircraft with electrical supplies in accordance with EN 2282 (all categories).

This document details the dimensions and performance requirements of a multimode female size 12, non-physical contact expanded beam terminus. This terminus is suitable for use with connectors which have standard size 12 socket crimp contact cavities (series I and III): connectors with cavities for contact of type EN 3155-009F12.

This document specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for threaded ring coupling circular connectors with expanded beam termini, intended for use in a temperature range from −55 °C to 125 °C continuous.

This document details the dimensions and performance requirements of a multimode male size 12, non-physical contact expanded beam terminus. This terminus is suitable for use with connectors which have standard size 12 pin crimp contact cavities: connectors with cavities for contact of type EN 3155-008M12.

This document details the dimensions and performance requirements of a multimode female size 16, non-physical contact expanded beam terminus. This terminus is suitable for use with connectors which have standard size 16 socket crimp contact cavities (series I and III): connectors with cavities for contact of type EN 3155-009F16.

This document specifies methods for measuring and calculating the coverage of protection sleeves for electrical cables and cable bundles. It is presupposed to be used together with EN 6059 100.

This document specifies the characteristics of post installation flexible mechanical protection sleeves for electrical cable and cable bundles made from meta-aramid fibres and provided with a water repellent protection.

This document details the dimensions and performance requirements of a multimode male size 16, non-physical contact expanded beam terminus. This terminus is suitable for use with connectors which have standard size 16 pin crimp contact cavities: connectors with cavities for contact of type EN 3155-008M16.

This document specifies cable clamps for 2 and 4 module connectors, series 2 and series 3 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.

This document specifies accessories of single modules connectors according to EN 4165 024 and EN 4165 025 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.

This document specifies the blank chimneys (1 per module cavity) for accessories used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.
The connector accessory body corresponding to those blank chimneys is specified in EN 4165-014.

This document specifies the oval chimneys for accessories for accessories used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.
The connector accessory body corresponding to those oval chimneys is specified in EN 4165-014.

This document specifies the flange mounting receptacles 2 and 4 modules, series 2 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.
The plugs, flight caps and accessories corresponding to those receptacles are specified in EN 4165-002.

This document specifies the rack and panel rear mounted plug 2 and 4 modules, series 2 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to those plugs are specified in EN 4165-002.

This document specifies the plugs series 2, for 2 and 4 modules used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to those plugs are specified in EN 4165 002.

This document specifies the stackable mounting receptacles series 3, for 2 or 4 modules used in the family of rectangular electrical modular connectors, operating temperature 175 °C continuous. The plugs, flight caps and accessories corresponding to those receptacles are specified in EN 4165 002.

This document specifies the plug series 3, for 2 and 4 modules used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to those plugs are specified in EN 4165 002.

This document specifies the rack and panel plug for 2 and 4 modules, series 2 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to those plugs are specified in EN 4165-002.

This document specifies the single module plug used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to this plug are specified in EN 4165-002. The cavity of this connector is uncoded, so it can accept polarized modules N, A, B, C and D as specified in EN 4165-002.

This document specifies the general conditions for test methods applicable to circuit breakers for aerospace applications.

This document specifies the general requirements for the methods of testing elements of electrical, optical and data transmission system connections used in aerospace applications.

This document specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a bend-insensitive, 50 µm/125 µm Graded Index fibre core, 1,8 mm outside diameter for non pull-proof contact designs.

This document gives design information and specifies test methods for aircraft circuit breakers covered
by European Standards. It is applicable if it is referred to in these standards.

This document specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 50/125 µm Graded Index fibre core, 1,8 mm outside diameter for non-pull-proof contact designs.

This document specifies the characteristics of jam-nuts for jam-nut receptacles in the family of circular electrical connectors coupled by threaded ring.
It is applicable to classes specified in Table 3.
For receptacles using these jam-nuts, see EN 2997-004, and EN 2997-006 for class SE only.

This document provides a list of removable sealing sleeves as defined in the product standards for use in connectors or other electrical elements of connection.

This document specifies a method of measuring the semi loose effect of a semi loose cable.
Pull proof optical contacts are used. The optical contact (ferrule) is longitudinally moving to preserve the optical performance even when cables are pulled.
Consequently, the buffered fibre moves beneath the strength members (called semi loose effect).
This document describes a test methodology to assess the quality of the cable when contact is pulled or pushed.

This document specifies the characteristics of three-pole circuit breakers, temperature compensated with a rated current from 1 A to 25 A, used in aircraft on-board circuits at a temperature between −55 °C and 125 °C for ratings ≤ 15 A and −55 °C to 90 °C for ratings > 15 A and at an altitude of 22 000 m max.
These circuit breakers are operated by a push-pull type single pushbutton (actuator), with delayed action “trip-free” tripping.
They will continue to function up to the short-circuit current.