ISO/TC 149/SC 1/WG 13 - Revision of the series of ISO 4210:2014 and ISO 8098:2014

ISO 4210-2:2015 specifies safety and performance requirements for the design, assembly, and testing of bicycles and sub-assemblies having saddle height as given in Table 1, and lays down guidelines for manufacturer's instructions on the use and care of such bicycles. This part of ISO 4210 applies to young adult bicycles with maximum saddle height of 635 mm or more and less than 750 mm, city and trekking bicycles, mountain bicycles, and racing bicycles that have a maximum saddle height of 635 mm or more including folding bicycles (see Table 1 and Figure 1). This part of ISO 4210 does not apply to specialized types of bicycle, such as delivery bicycles, recumbent bicycles, tandems, BMX bicycles, and bicycles designed and equipped for use in severe applications such as sanctioned competition events, stunting, or aerobatic manoeuvres. NOTE For bicycles with a maximum saddle height of 435 mm or less, see ISO 8124‑1, and with a maximum saddle height of more than 435 mm and less than 635 mm, see ISO 8098.

ISO 4210-6:2015 specifies the frame and fork test methods for ISO 4210‑2.

ISO 4210-3:2014 specifies the common test methods for ISO 4210‑2.

ISO 4210-1:2014 specifies terms and definitions related to safety and performance requirements for the design, assembly, and testing of bicycles and sub-assemblies having saddle height as given in Table 1.

ISO 4210-4:2014 specifies the braking test methods for ISO 4210‑2.

ISO 4210-5:2014 specifies the steering test methods for ISO 4210‑2.

ISO 4210-7:2014 specifies wheel and rim test methods for ISO 4210‑2.

ISO 4210-8:2014 specifies pedal and drive system test methods for ISO 4210‑2.

ISO 4210-9:2014 specifies saddle and seat-post test methods for ISO 4210‑2.

ISO 8098:2014 specifies safety and performance requirements and test methods for the design, assembly and testing of fully assembled bicycles and sub-assemblies for young children. It also provides guidelines for instructions on the use and care of the bicycles. ISO 8098:2014 is applicable to bicycles with a maximum saddle height of more than 435 mm and less than 635 mm, propelled by a transmitted drive to the rear wheel. ISO 8098:2014 is not applicable to special bicycles intended for performing stunts (e.g. BMX bicycles).