29.220.30 - Alkaline secondary cells and batteries

IEC 62485-5:2020 applies to the installation of one or more stationary secondary batteries having a maximum aggregate DC voltage of 1 500 V to any DC part of the power network, and describes the principal measures for protections during normal operation or under expected fault conditions against hazards generated from:
– electricity,
– short-circuits,
– electrolyte,
– gas emission,
– fire,
– explosion.
This document provides requirements on safety aspects associated with the installation,...view more

This part of IEC 61960 specifies performance tests, designations, markings, dimensions and
other requirements for coin secondary lithium cells and batteries for portable applications and
backup power supply such as memory backup applications.
The objective of this document is to provide the purchasers and users of coin secondary lithium
cells and batteries with a set of criteria with which they can assess the performance of coin
secondary lithium cells and batteries offered by various manuf...view more

EN-IEC 63115-1 specifies the marking, designation, tests and requirements for sealednickelmetalhydride cells and batteries used in industrial applications, including stationaryapplications. When an IEC International Standard specifying test conditions and requirements for cellsused in special applications is in conflict with this document, the former takes precedence (e.g.IEC 62675).The following are some examples of applications that utilize the cells and batteries fallingunder the scope of thi...view more

IEC 63056:2020 specifies requirements and tests for the product safety of secondary lithium cells and batteries used in electrical energy storage systems (Figure 2) with a maximum DC voltage of 1 500 V (nominal).
Basic safety requirements for the secondary lithium cells and batteries used in industrial applications are included in IEC 62619. This document provides additional or specific requirements for electrical energy storage systems.
Since this document covers batteries for various electri...view more

IEC 63115-1:2020 specifies the marking, designation, tests and requirements for sealed nickel­metal hydride cells and batteries used in industrial applications, including stationary applications. When an IEC International Standard specifying test conditions and requirements for cells used in special applications is in conflict with this document, the former takes precedence (e.g. IEC 62675). The following are some examples of applications that utilize the cells and batteries falling under the sc...view more

IEC 63115-1:2020 specifies the marking, designation, tests and requirements for sealed nickel­metal hydride cells and batteries used in industrial applications, including stationary applications.
When an IEC International Standard specifying test conditions and requirements for cells used in special applications is in conflict with this document, the former takes precedence (e.g. IEC 62675).
The following are some examples of applications that utilize the cells and batteries falling under the ...view more

IEC 63057:2020 specifies safety tests and requirements for secondary lithium batteries permanently installed in road vehicles not for the propulsion. Replacement secondary batteries permanently installed in road vehicles not for propulsion are covered by this document.
The following are typical applications that utilize the batteries under the scope of this document: a power source for the starting of internal combustion engines, lighting, on-board auxiliary equipment, and energy absorption for...view more

This document specifies methods for the clear identification of secondary cells, batteries, battery modules and monoblocs according to their chemistry (electrochemical storage technology). The markings described in this document are applicable for secondary cells, batteries, battery modules and monoblocs with a volume of more than 900 cm3. The marking of the chemistry is useful for the installation, operation and decommissioning phases of battery life. Many recycling processes are chemistry spec...view more

IEC 62902:2019 specifies methods for the clear identification of secondary cells, batteries, battery modules and monoblocs according to their chemistry (electrochemical storage technology).
The markings described in this document are applicable for secondary cells, batteries, battery modules and monoblocs with a volume of more than 900 cm3.
The marking of the chemistry is useful for the installation, operation and decommissioning phases of battery life.
Many recycling processes are chemistry ...view more

IEC 62899-501-1:2019(E) specifies failure modes and mechanical stress test methods for the determination of reliability characteristics of bendable or flexible printed primary cells and secondary cells and batteries as defined in IEC 60050-482:2004, 482-01-01, IEC 60050‑482:2004, 482-01-02, IEC 60050-482:2004, 482-01-03, IEC 60050-482:2004, 482‑01-04 and IEC 60050-482:2004, 482-01-05, respectively.
Important parameters and specifications for primary cells are mentioned in IEC 60086-1 and IEC 60...view more

This part of the IEC 62485 applies to stationary secondary batteries and battery installations
with a maximum voltage of DC 1 500 V (nominal) and describes the principal measures for
protections against hazards generated from:
– electricity,
– gas emission,
– electrolyte.
This International Standard provides requirements on safety aspects associated with the
erection, use, inspection, maintenance and disposal.
It covers lead-acid and NiCd / NiMH batteries.
Examples for the main applicat...view more

This Part of IEC 62485 specifies the basic requirements for secondary batteries and battery
installations.
The requirements regarding safety, reliability, life expectancy, mechanical strength, cycle
stability, internal resistance, and battery temperature, are determined by various applications,
and this, in turn, determines the selection of the battery design and technology.
In general, the requirements and definitions are specified for lead-acid and nickel-cadmium
batteries. For other bat...view more

This Part of IEC 62485 applies to the safety aspects associated with the accommodation, the
arrangements of circuits and the operation of secondary valve-regulated lead-acid cells and
batteries in portable appliances. Requirements are specified which oblige the manufacturers
of appliances and secondary batteries to prevent the misuse of batteries in the course of
operation to provide protective measures avoiding injury to persons in case of battery failure
and to provide sufficient informat...view more

IEC 62485-4:2015 applies to the safety aspects associated with the accommodation, the arrangements of circuits and the operation of secondary valve-regulated lead-acid cells and batteries in portable appliances. Requirements are specified which oblige the manufacturers of appliances and secondary batteries to prevent the misuse of batteries in the course of operation to provide protective measures avoiding injury to persons in case of battery failure and to provide sufficient information to user...view more

IEC 62485-1:2015 specifies the basic requirements for secondary batteries and battery installations. The requirements regarding safety, reliability, life expectancy, mechanical strength, cycle stability, internal resistance, and battery temperature, are determined by various applications, and this, in turn, determines the selection of the battery design and technology. In general, the requirements and definitions are specified for lead-acid and nickel-cadmium batteries. For other battery systems...view more

IEC 62485-2:2010 applies to stationary secondary batteries and battery installations with a maximum voltage of DC 1 500 V (nominal) and describes the principal measures for protections against hazards generated from: - electricity, - gas emission, - electrolyte. This International Standard provides requirements on safety aspects associated with the erection, use, inspection, maintenance and disposal. It covers lead-acid and NiCd/NiMH batteries.

IEC 61951-1:2013 specifies marking, designation, dimensions, tests and requirements for portable sealed nickel-cadmium small prismatic, cylindrical and button rechargeable single cells, suitable for use in any orientation. This third edition cancels and replaces the second edition (2003) and its amendment 1 (2005) of which it constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:   - addition of several new cell s...view more

This part of IEC 63005 describes basic requirements for event video data recorders (EVDRs)
for road vehicle accidents, used for identifying and analysing causes of accidents based on
video from a front-mounted camera and other information obtained before and after such
events. In addition to video from a front-mounted camera and vehicle behaviour, these
products can record side and/or rear video data for enhanced functionalities in determining
causes of accidents and analysing collision eve...view more

This document specifies requirements and tests for the safe operation of secondary lithium
cells and batteries used in industrial applications including stationary applications.
When there exists an IEC standard specifying test conditions and requirements for cells used
in special applications and which is in conflict with this document, the former takes
precedence (e.g., IEC 62660 series on road vehicles).
The following are some examples of applications that utilize cells and batteries und...view more

This part of IEC 62133 specifies requirements and tests for the safe operation of portable
sealed secondary nickel cells and batteries containing alkaline electrolyte, under intended use
and reasonably foreseeable misuse.