Primary batteries - Part 6: Guidance on environmental aspects

IEC 60086-6:2020 applies to all chemistries of portable primary cells and batteries standardized in the 60086 series. The purpose of this document is to provide guidance on the proper scientific protocols for testing the environmental performance of batteries; the symbols used to convey messages for collection, recycling, or other ideas; and the aspects and functional unit(s) to be included in assessing the environmental impact of batteries with modern life-cycle analysis techniques

Primärbatterien – Teil 6: Leitfaden zu Umweltaspekten

Piles électriques - Partie 6: Recommandation sur les aspects liés à l'environnement

IEC 60086-6:2020 s'applique à toutes les compositions chimiques présentes dans les piles électriques et éléments portables normalisés dans la série IEC 60086. Le présent document a pour but de fournir des recommandations sur les protocoles scientifiques corrects pour les essais sur les performances environnementales des piles, sur les symboles des messages relatifs à la collecte, au recyclage et autres opérations, et sur les aspects et les unités fonctionnelles à prendre en compte lors de l'évaluation de l'impact sur l'environnement des piles par des techniques modernes d'analyse du cycle de vie.

Primarne baterije - 6. del: Navodilo glede okoljskih vidikov (IEC 60086-6:2020)

General Information

Status
Published
Publication Date
02-Apr-2020
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
03-Apr-2020
Completion Date
03-Apr-2020

Buy Standard

Standard
EN IEC 60086-6:2020 - BARVE
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2020
Primarne baterije - 6. del: Navodilo glede okoljskih vidikov (IEC 60086-6:2020)
Primary batteries - Part 6: Guidance on environmental aspects (IEC 60086-6:2020)
Primärbatterien - Teil 6: Leitfaden zu Umweltaspekten (IEC 60086-6:2020)
Piles électriques - Partie 6: Recommandation sur les aspects liés à l'environnement (IEC
60086-6:2020)
Ta slovenski standard je istoveten z: EN IEC 60086-6:2020
ICS:
29.220.10 Primarni členi in baterije Primary cells and batteries
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60086-6

NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2020
ICS 29.220.10
English Version
Primary batteries - Part 6: Guidance on environmental aspects
(IEC 60086-6:2020)
Piles électriques - Partie 6: Recommandation sur les Primärbatterien - Teil 6: Leitfaden zu Umweltaspekten
aspects liés à l'environnement (IEC 60086-6:2020)
(IEC 60086-6:2020)
This European Standard was approved by CENELEC on 2020-03-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60086-6:2020 E

European foreword
The text of document 35/1436/FDIS, future edition 1 of IEC 60086-6, prepared by IEC/TC 35 "Primary
cells and batteries" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-12-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-03-13
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60086-6:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
ISO 14040:2006 NOTE Harmonized as EN ISO 14040:2006 (not modified)
IEC 62321 (series) NOTE Harmonized as EN 62321 (series)
IEC 62321-4:2013 NOTE Harmonized as EN 62321-4:2014 (not modified)
IEC 62321-5:2013 NOTE Harmonized as EN 62321-5:2014 (not modified)

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60086-1 2015 Primary batteries - Part 1: General EN 60086-1 2015
ASTM D 93-79 - Standard Test Methods for Flash Point by - -
or D 93-80 Pensky-Martens Closed Cup Tester
ASTM D 3278-78 - Standard Test Methods for Flash Point of - -
Liquids by Small Scale Closed-Cup
Apparatus
EPA Publication - Test Methods for Evaluating Solid Waste, - -
SW-846, Method Physical/Chemical Methods
1110A
EPA Publication - Test Methods for Evaluating Solid Waste, - -
SW-846, Method Physical/Chemical Methods
EPA Publication - Test Methods for Evaluating Solid Waste, - -
SW-846, Method Physical/Chemical Methods
9040C
IEC 60086-6 ®
Edition 1.0 2020-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Primary batteries –
Part 6: Guidance on environmental aspects

Piles electriques –
Partie 6: Recommandation sur les aspects liés à l'environnement

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220.10 ISBN 978-2-8322-7810-9

– 2 – IEC 60086-6:2020 © IEC 2020
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 General considerations . 10
4.1 Overview . 10
4.2 General . 10
4.3 Intent of this document . 10
4.4 Battery selection . 10
4.5 Collection rate . 11
5 Requirements and recommendations for the environment . 11
5.1 Overview . 11
5.2 General . 11
5.3 Requirements and recommendations in regards to heavy metals . 11
5.4 Disassembly method . 12
5.4.1 General . 12
5.4.2 Sorting components . 12
5.4.3 Outline of disassembly procedure . 13
5.4.4 Qualifications for disassembly . 13
5.5 Sample preparation and analysis method . 13
5.6 Marking . 13
6 Disposal of battery. 14
6.1 General . 14
6.2 Confirmation of characteristics of hazardous waste . 14
6.2.1 General . 14
6.2.2 Toxicity . 14
6.2.3 Ignitability . 14
6.2.4 Reactivity . 15
6.2.5 Corrosivity . 15
6.3 Control of hazardous waste. 15
7 Environmental considerations . 16
7.1 General . 16
7.2 Environmental assessment . 16
7.2.1 General . 16
7.2.2 Reduction . 16
7.2.3 Reuse . 16
7.2.4 Recycling . 16
7.2.5 Raw material usage . 17
7.2.6 Manufacturing . 17
7.3 Packaging considerations . 18
7.3.1 General . 18
7.3.2 Maintain safety and quality . 18
7.3.3 Convey required information that is both regulated and voluntary . 18
8 Identifying product environmental aspects using a systematic approach . 18
9 Life cycle assessment . 18

IEC 60086-6:2020 © IEC 2020 – 3 –
Annex A (informative) Battery specific laws and regulations . 19
A.1 General . 19
A.2 Minamata Convention on Mercury . 19
A.3 Africa – Tunisia . 19
A.4 Asia . 20
A.4.1 China . 20
A.4.2 Chinese Taiwan (Province of China) . 21
A.4.3 Japan . 21
A.4.4 Korea, Republic of . 22
A.5 Europe . 23
A.5.1 EU . 23
A.5.2 Norway . 23
A.5.3 Switzerland . 24
A.6 Latin America . 24
A.6.1 Argentina . 24
A.6.2 Brazil . 24
A.6.3 Colombia . 25
A.6.4 Costa Rica . 25
A.7 North America . 26
A.7.1 Canada .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.