SIST EN 62952-2:2017

Power sources for a wireless communication device - Part 2: Profile for power modules with batteries (IEC 62952-2:2016)

IEC 62952-2:2016 specifies a profile for a power module containing batteries used as power source for wireless communication devices.

Energiequellen für ein Funkkommunikationsgerät - Teil 2: Profil für Energiemodule mit Batterien (IEC 62952-2:2016)

Sources d'énergie pour un appareil de communication sans fil - Partie 2: Profil des modules d'alimentation à batteries (IEC 62952-2:2016)

L'IEC 62952-2:2016 spécifie un profil pour un module d'alimentation contenant des batteries utilisées comme source d'énergie pour des appareils de communication sans fil.

Viri napajanja brezžične komunikacijske naprave - 2. del: Profil za napajalne module z baterijami (IEC 62952-2:2016)

Standard IEC 62952-2:2016 določa profil za napajalne module z baterijami, ki se uporabljajo kot vir napajanja za brezžične komunikacijske naprave.

General Information

• Status: Published
• Publication Date: 07-Aug-2017
• ICS: 29.220.10 - Primary cells and batteries
• ICS: 33.040.40 - Data communication networks
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 06-Apr-2017
• Due Date: 11-Jun-2017
• Completion Date: 08-Aug-2017
• Ref Project: EN 62952-2:2016 - Power sources for a wireless communication device - Part 2: Profile for power modules with batteries

Overview

SIST EN 62952-2:2017, published by CLC, is a European standard that specifies the profile for power modules with batteries used as power sources for wireless communication devices. It aligns with the international IEC 62952-2:2016 standard and serves as Part 2 of the broader IEC 62952 series, complementing Part 1 which covers general requirements for power sources.

This standard defines detailed profile selections for power modules containing batteries, ensuring interoperability, reliable performance, and compliance with relevant safety and environmental conditions. It supports industry-wide consistency for devices dependent on battery power in wireless communication applications.

Key Topics

• Power Module Profile: EN 62952-2 delineates the specific profile for power modules integrating batteries as energy sources, selecting relevant subclauses from the general requirements of IEC 62952-1.
• Battery Integration: Specifies the use of batteries according to established international battery standards but does not itself define battery chemistry or types.
• Design and Compliance: Covers design aspects and compliance requirements ensuring power modules meet necessary performance and safety benchmarks.
• Environmental Conditions: Addresses operational constraints such as temperature, air pressure, vibration, shock, humidity, and corrosive environments. Some are marked optional depending on application needs.
• Protection Features: Includes provisions for handling explosive atmospheres with specific battery-related safety measures.
• Interchangeability: Sets requirements for electrical and mechanical interfaces to enable module interchangeability across compliant devices.
• Logistics and Maintenance: Provides guidelines for storage, marking, maintenance, transportation, and disposal of power modules.
• Normative References: EN 62952-2 references IEC 62952-1 for general requirements and other battery-related IEC standards ensuring comprehensive technical coverage.

Applications

EN 62952-2 is essential for manufacturers and designers of wireless communication devices that rely on battery-powered modules. Typical uses include:

• Wireless communication equipment such as mobile radios, walkie-talkies, and portable transceivers.
• Industrial and commercial wireless devices where standardized battery module profiles enable easy replacement and upgrade.
• Safety-critical communication devices requiring stringent compliance with explosive atmospheres and harsh environmental conditions.
• Product development and testing ensuring power modules meet international interoperability and safety standards.
• Quality assurance and certification processes for power sources in wireless communication applications.

By adopting EN 62952-2, organizations can ensure compatibility, enhance reliability, and align with globally accepted electrotechnical standards.

Related Standards

• EN 62952-1:2016 - Power sources for a wireless communication device - Part 1: General requirements of power sources. This foundational document forms the basis for the profile detailed in Part 2.
• IEC 60086 series - Primary batteries standards specifying general requirements and physical/electrical specifications of batteries.
• VDI/VDE 2185 Blatt 3 - Guidance related to batteries relevant for compatibility and safety.
• Additional IEC and ISO standards referenced within EN 62952-2 to ensure harmonized technical definitions and requirements.

---

Keywords: EN 62952-2, IEC 62952-2, wireless communication power sources, battery power modules, power module profile, wireless device batteries, battery module standards, electrotechnical standardization, CENELEC standards, battery safety, power source interoperability

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2017
9LULQDSDMDQMDEUH]åLþQHNRPXQLNDFLMVNHQDSUDYHGHO3URILO]DQDSDMDOQH
PRGXOH]EDWHULMDPL,(&
Power sources for a wireless communication device - Part 2: Profile for power modules
with batteries (IEC 62952-2:2016)
Energiequellen für ein Funkkommunikationsgerät - Teil 2: Profil für Energiemodule mit
Batterien (IEC 62952-2:2016)
Sources d'énergie pour un appareil de communication sans fil - Partie 2: Profil des
modules d'alimentation à batteries (IEC 62952-2:2016)
Ta slovenski standard je istoveten z: EN 62952-2:2016
ICS:
29.220.10 3ULPDUQLþOHQLLQEDWHULMH Primary cells and batteries
33.040.40 Podatkovna komunikacijska Data communication
omrežja networks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62952-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2016
ICS 33.040.40; 29.220.10
English Version
Power sources for a wireless communication device - Part 2:
Profile for power modules with batteries
(IEC 62952-2:2016)
Sources d'énergie pour un appareil de communication sans Energiequellen für ein Funkkommunikationsgerät - Teil 2:
fil - Partie 2: Profil des modules d'alimentation à batteries Profil für Energiemodule mit Batterien
(IEC 62952-2:2016) (IEC 62952-2:2016)
This European Standard was approved by CENELEC on 2016-11-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62952-2:2016 E
European foreword
The text of document 65B/1054/FDIS, future edition 1 of IEC 62952-2, prepared by SC 65B
“Measurement and control devices” of IEC/TC 65 “Industrial process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be (dop) 2017-08-09
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-11-09
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62952-2:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60086-1:2015 NOTE Harmonized as EN 60086-1:2015.
IEC 60086-1:2015 NOTE Harmonized as EN 60086-1:2016.

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62952-1 2016 Power sources for a wireless - -
communication device - Part 1: General
requirements of power modules
IEC 62952-2 ®
Edition 1.0 2016-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Power sources for a wireless communication device –

Part 2: Profile for power modules with batteries

Sources d'énergie pour un appareil de communication sans fil –

Partie 2: Profil des modules d'alimentation à batteries

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220.10; 33.040.40 ISBN 978-2-8322-3639-0

– 2 – IEC 62952-2:2016  IEC 2016
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references. 6
3 Terms, definitions, abbreviated terms, acronyms and conventions . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms and acronyms . 6
3.3 Convention for profiles . 6
4 Profile for power modules with batteries . 7
Bibliography . 9

Table 1 – Layout of profile (sub)clause selection tables . 6
Table 2 – Contents of (sub)clause selection tables . 7
Table 3 – General power module profile selection . 8

IEC 62952-2:2016  IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE –

Part 2: Profile for power modules with batteries

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to
...