Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems

This part of IEC 62133 specifies requirements and tests for the safe operation of portable
sealed secondary nickel cells and batteries containing alkaline electrolyte, under intended use
and reasonably foreseeable misuse.

Sekundärzellen und -batterien mit alkalischen oder anderen nicht säurehaltigen Elektrolyten - Sicherheitsanforderungen für tragbare gasdichte Sekundärzellen und daraus hergestellte Batterien für die Verwendung in tragbaren Geräten - Teil 1: Nickel-Systeme

Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Exigences de sécurité pour les accumulateurs portables étanches, et pour les batteries qui en sont constituées, destinés à l'utilisation dans des applications portables - Partie 1: Systèmes au nickel

L'IEC 62133-1:2017 spécifie les exigences et les essais pour le fonctionnement en sécurité des accumulateurs portables étanches au nickel contenant un électrolyte alcalin dans des conditions d’utilisations prévues et dans des conditions d’utilisations abusives raisonnablement prévisibles. Cette première édition annule et remplace l'IEC 62133 parue en 2012. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'IEC 62133:2012: - séparation des systèmes au lithium dans une Partie 2 distincte; - inclusion des exigences en matière d'élément bouton.

Sekundarni členi in baterije z alkalnimi ali drugimi nekislinskimi elektroliti - Varnostne zahteve za prenosne zatesnjene sekundarne člene in za baterije, narejene iz njih, za uporabo v prenosnih napravah - 1. del: Nikljevi sistemi

Ta del standarda IEC 62133 določa zahteve in preskuse za varno delovanje prenosnih zatesnjenih sekundarnih nikljevih členov in baterij z alkalnimi elektroliti pri predvideni uporabi in razumno predvideni nepravilni uporabi.

General Information

Status
Published
Publication Date
17-Dec-2017
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
13-Dec-2017
Due Date
17-Feb-2018
Completion Date
18-Dec-2017

RELATIONS

Buy Standard

Standard
SIST EN 62133-1:2018 - BARVE na PDF-str 19, natisnjeno za čitalnico
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 62133-1:2018
01-januar-2018
1DGRPHãþD
SIST EN 62133:2013
6HNXQGDUQLþOHQLLQEDWHULMH]DONDOQLPLDOLGUXJLPLQHNLVOLQVNLPLHOHNWUROLWL
9DUQRVWQH]DKWHYH]DSUHQRVQH]DWHVQMHQHVHNXQGDUQHþOHQHLQ]DEDWHULMH
QDUHMHQHL]QMLK]DXSRUDERYSUHQRVQLKQDSUDYDKGHO1LNOMHYLVLVWHPL

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety

requirements for portable sealed secondary cells, and for batteries made from them, for

use in portable applications - Part 1: Nickel systems

Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Exigences de

sécurité pour les accumulateurs portables étanches, et pour les batteries qui en sont

constituées, destinés à l'utilisation dans des applications portables - Partie 1: Systèmes

au nickel
Ta slovenski standard je istoveten z: EN 62133-1:2017
ICS:
29.220.30 $ONDOQLVHNXQGDUQLþOHQLLQ Alkaline secondary cells and
EDWHULMH batteries
SIST EN 62133-1:2018 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 62133-1:2018
---------------------- Page: 2 ----------------------
SIST EN 62133-1:2018
EUROPEAN STANDARD EN 62133-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2017
ICS 29.220.30 Supersedes EN 62133:2013 (partially)
English Version
Secondary cells and batteries containing alkaline or other non-
acid electrolytes - Safety requirements for portable sealed
secondary cells, and for batteries made from them, for use in
portable applications - Part 1: Nickel systems
(IEC 62133-1:2017)

Accumulateurs alcalins et autres accumulateurs à Akkumulatoren und Batterien mit alkalischen oder anderen

électrolyte non acide - Exigences de sécurité pour les nicht säurehaltigen Elektrolyten - Sicherheitsanforderungen

accumulateurs portables étanches, et pour les batteries qui für tragbare gasdichte Akkumulatoren und daraus

en sont constituées, destinés à l'utilisation dans des hergestellte Batterien für die Verwendung in tragbaren

applications portables - Partie 1: Systèmes au nickel Geräten - Teil 1: Nickel-Systeme

(IEC 62133-1:2017) (IEC 62133-1:2017)

This European Standard was approved by CENELEC on 2017-03-14. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,

Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 62133-1:2017 E
---------------------- Page: 3 ----------------------
SIST EN 62133-1:2018
EN 62133-1:2017
European foreword

The text of document 21A/619/FDIS, future edition 1 of IEC 62133-1, prepared by SC 21A "Secondary

cells and batteries containing alkaline or other non-acid electrolytes", of IEC/TC 21 "Secondary cells

and batteries" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as

EN 62133-1:2017.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2017-12-14
national level by publication of an identical national
standard or by endorsement
(dow) 2020-03-14
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 62133:2013 (partially).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such

patent rights.
Endorsement notice

The text of the International Standard IEC 62133-1:2017 was approved by CENELEC as a European

Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60051 NOTE Harmonized in EN 60051 series.
IEC 60664 NOTE Harmonized in EN 60664 series.
IEC 61434 NOTE Harmonized as EN 61434.
---------------------- Page: 4 ----------------------
SIST EN 62133-1:2018
EN 62133-1:2017
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),

the relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is

available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-482 2004 International Electrotechnical - -
Vocabulary (IEV) - Part 482: Primary
and secondary cells and batteries
IEC 61951-1 - Secondary cells and batteries containing EN 61951-1 -
alkaline or other non-acid electrolytes -
Secondary sealed cells and batteries for
portable applications - Part 1: Nickel-
Cadmium
IEC 61951-2 - Secondary cells and batteries containing EN 61951-2 -
alkaline or other non-acid electrolytes -
Secondary sealed cells and batteries for
portable applications - Part 2: Nickel-
metal hydride
ISO/IEC Guide 51 - Safety aspects - Guidelines for their - -
inclusion in standards
1) To be published.
---------------------- Page: 5 ----------------------
SIST EN 62133-1:2018
---------------------- Page: 6 ----------------------
SIST EN 62133-1:2018
IEC 62133-1
Edition 1.0 2017-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Secondary cells and batteries containing alkaline or other non-acid
electrolytes – Safety requirements for portable sealed secondary cells, and for
batteries made from them, for use in portable applications –
Part 1: Nickel systems
Accumulateurs alcalins et autres accumulateurs à électrolyte non acide –
Exigences de sécurité pour les accumulateurs portables étanches, et pour les

batteries qui en sont constituées, destinés à l'utilisation dans des applications

portables –
Partie 1: Systèmes au nickel
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220.30 ISBN 978-2-8322-3909-4

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 62133-1:2018
– 2 – IEC 62133-1:2017 © IEC 2017
CONTENTS

FOREWORD ........................................................................................................................... 4

1 Scope .............................................................................................................................. 6

2 Normative references ...................................................................................................... 6

3 Terms and definitions ...................................................................................................... 6

4 Parameter measurement tolerances ................................................................................ 8

5 General safety considerations ......................................................................................... 9

5.1 General ................................................................................................................... 9

5.2 Insulation and wiring ............................................................................................... 9

5.3 Venting ................................................................................................................... 9

5.4 Temperature, voltage and current management .................................................... 10

5.5 Terminal contacts ................................................................................................. 10

5.6 Assembly of cells into batteries ............................................................................. 10

5.7 Quality plan .......................................................................................................... 10

6 Type test and sample size ............................................................................................. 10

7 Specific requirements and tests ..................................................................................... 11

7.1 Charging procedure for test purposes ................................................................... 11

7.2 Intended use ......................................................................................................... 11

7.2.1 Continuous low-rate charging (cells) .............................................................. 11

7.2.2 Vibration ........................................................................................................ 11

7.2.3 Case stress at high ambient temperature (batteries) ...................................... 12

7.2.4 Temperature cycling ...................................................................................... 12

7.3 Reasonably foreseeable misuse ............................................................................ 13

7.3.1 Incorrect installation (cells) ............................................................................ 13

7.3.2 External short circuit ...................................................................................... 13

7.3.3 Free fall ......................................................................................................... 14

7.3.4 Mechanical shock (crash hazard) ................................................................... 14

7.3.5 Thermal abuse (cells) .................................................................................... 14

7.3.6 Crushing of cells ............................................................................................ 15

7.3.7 Low pressure (cells) ...................................................................................... 15

7.3.8 Overcharge .................................................................................................... 15

7.3.9 Forced discharge (cells) ................................................................................ 15

8 Information for safety ..................................................................................................... 16

8.1 General ................................................................................................................. 16

8.2 Small cell and battery safety information ............................................................... 16

9 Marking ......................................................................................................................... 17

9.1 Cell marking .......................................................................................................... 17

9.2 Battery marking..................................................................................................... 17

9.3 Caution for ingestion of small cells and batteries .................................................. 17

9.4 Other information .................................................................................................. 18

10 Packaging ..................................................................................................................... 18

Annex A (informative) Recommendations to equipment manufacturers and battery

assemblers ........................................................................................................................... 19

Annex B (informative) Recommendations to the end-users .................................................. 20

Annex C (informative) Packaging ......................................................................................... 21

Bibliography .......................................................................................................................... 22

---------------------- Page: 8 ----------------------
SIST EN 62133-1:2018
IEC 62133-1:2017 © IEC 2017 – 3 –

Figure 1 – Temperature profile for 7.2.4 – Temperature cycling test ...................................... 13

Figure 2 – Ingestion gauge ................................................................................................... 17

Table 1 – Sample size for type tests ..................................................................................... 11

Table 2 – Conditions for vibration test ................................................................................... 12

---------------------- Page: 9 ----------------------
SIST EN 62133-1:2018
– 4 – IEC 62133-1:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SECONDARY CELLS AND BATTERIES CONTAINING
ALKALINE OR OTHER NON-ACID ELECTROLYTES –
SAFETY REQUIREMENTS FOR PORTABLE SEALED
SECONDARY CELLS, AND FOR BATTERIES MADE FROM
THEM, FOR USE IN PORTABLE APPLICATIONS –
Part 1: Nickel systems
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 62133-1 has been prepared by subcommittee 21A: Secondary

cells and batteries containing alkaline or other non-acid electrolytes, of IEC technical

committee 21: Secondary cells and batteries.

This first edition cancels and replaces the second edition of IEC 62133 published in 2012. It

constitutes a technical revision.

This edition includes the following significant technical changes with respect to

IEC 62133:2012:
– separation of lithium systems into a separate Part 2;
---------------------- Page: 10 ----------------------
SIST EN 62133-1:2018
IEC 62133-1:2017 © IEC 2017 – 5 –
– inclusion of button cell requirements.
The text of this standard is based on the following documents:
FDIS Report on voting
21A/619/FDIS 21A/627/RVD

Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

A list of all parts of the IEC 62133 series, published under the general title Secondary cells

and batteries containing alkaline or other non-acid electrolytes – Safety requirements for

portable sealed secondary cells, and for batteries made from them, for use in portable

applications, can be found on the IEC website.

The committee has decided that the contents of this publication will remain unchanged until

the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data

related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates

that it contains colours which are considered to be useful for the correct

understanding of its contents. Users should therefore print this document using a

colour printer.
---------------------- Page: 11 ----------------------
SIST EN 62133-1:2018
– 6 – IEC 62133-1:2017 © IEC 2017
SECONDARY CELLS AND BATTERIES CONTAINING
ALKALINE OR OTHER NON-ACID ELECTROLYTES –
SAFETY REQUIREMENTS FOR PORTABLE SEALED
SECONDARY CELLS, AND FOR BATTERIES MADE FROM
THEM, FOR USE IN PORTABLE APPLICATIONS –
Part 1: Nickel systems
1 Scope

This part of IEC 62133 specifies requirements and tests for the safe operation of portable

sealed secondary nickel cells and batteries containing alkaline electrolyte, under intended use

and reasonably foreseeable misuse.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their

content constitutes requirements of this document. For dated references, only the edition

cited applies. For undated references, the latest edition of the referenced document (including

any amendments) applies.

IEC 60050-482:2004, International Electrotechnical Vocabulary – Part 482: Primary and

secondary cells and batteries (available at http://www.electropedia.org)
IEC 61951-1, Secondary cells and batteries containing alkaline or other non-acid

electrolytes – Portable sealed rechargeable single cells – Part 1: Nickel-cadmium

IEC 61951-2, Secondary cells and batteries containing alkaline or other non-acid

electrolytes – Portable sealed rechargeable single cells – Part 2: Nickel-metal hydride

ISO/IEC Guide 51, Safety aspects – Guidelines for their inclusion in standards
3 Terms and definitions

For the purposes of this document, the terms and definitions given in IEC 60050-482,

ISO/IEC Guide 51 and the following apply.

ISO and IEC maintain terminological databases for use in standardization at the following

addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1
safety
freedom from unacceptable risk
3.2
risk

combination of the probability of occurrence of harm and the severity of that harm

---------------------- Page: 12 ----------------------
SIST EN 62133-1:2018
IEC 62133-1:2017 © IEC 2017 – 7 –
3.3
harm

physical injury or damage to the health of people or damage to property or to the environment

3.4
hazard
potential source of harm
3.5
intended use

use of a product, process or service in accordance with specifications, instructions and

information provided by the supplier
3.6
reasonably foreseeable misuse

use of a product, process or service in a way which is not intended by the supplier, but which

may result from readily predictable human behaviour
3.7
secondary cell

basic manufactured unit providing a source of electrical energy by direct conversion of

chemical energy, that consists of electrodes, separators, electrolyte, container and terminals,

and that is designed to be charged electrically
3.8
secondary battery

assembly of secondary cell(s) ready for use as a source of electrical energy characterized by

its voltage, size, terminal arrangement, capacity and rate capability
Note 1 to entry: Includes single cell batteries.
3.9
leakage
unplanned, visible escape of liquid electrolyte
3.10
venting

release of excessive internal pressure from a cell or battery in a manner intended by design to

preclude rupture or explosion
3.11
rupture

mechanical failure of a cell container or battery case induced by an internal or external cause,

resulting in exposure or spillage but not ejection of materials
3.12
explosion

failure that occurs when a cell container or battery case opens violently and major

components are forcibly expelled
3.13
fire
emission of flames from a cell or battery
3.14
portable battery
battery for use in a device or appliance which is conveniently hand-carried
---------------------- Page: 13 ----------------------
SIST EN 62133-1:2018
– 8 – IEC 62133-1:2017 © IEC 2017
3.15
portable cell
cell intended for assembly in a portable battery
3.16
rated capacity

capacity value of a cell or battery determined under specified conditions and declared by the

manufacturer

Note 1 to entry: The rated capacity is the quantity of electricity C Ah (ampere-hours) declared by the

manufacturer which a single cell can deliver when discharged at the reference test current of 0,2 I A to a specified

final voltage, after charging, storing and discharging under specified conditions.

[SOURCE: IEC 60050-482:2004, 482-03-15, modified – In the definition, "battery" has been

replaced with "cell or battery". Note 1 to entry has been added.]
3.17
reference test current

charge or discharge current, expressed as a multiple of I A, where I A = C Ah/1 h, as

t t 5

defined in IEC 61434, and based on the rated capacity (C Ah) of the cell or battery

3.18
button cell
coin cell

cell with a cylindrical shape in which the overall height is less than the diameter, e.g. in the

shape of a button or a coin

Note 1 to entry: In practice, the term coin is used exclusively for non-aqueous lithium cells.

[SOURCE: IEC 60050-482:2004, 482-02-40]
3.19
cylindrical cell

cell with a cylindrical shape in which the overall height is equal to or greater than the diameter

[SOURCE: IEC 60050-482:2004, 482-02-39]
3.20
prismatic cell
cell having the shape of a parallelepiped whose faces are rectangular

[SOURCE: IEC 60050-482:2004, 482-02-38, modified – The source term is "prismatic" (adj.).

In the definition, "qualifies a cell or a battery" has been replaced with "cell".]

4 Parameter measurement tolerances

The overall accuracy of controlled or measured values, relative to the specified or actual

parameters, shall be within these tolerances:
a) ± 1 % for voltage;
b) ± 1 % for current;
c) ± 2 °C for temperature;
d) ± 0,1 % for time;
e) ± 1 % for dimension;
f) ± 1 % for capacity.
---------------------- Page: 14 ----------------------
SIST EN 62133-1:2018
IEC 62133-1:2017 © IEC 2017 – 9 –

These tolerances comprise the combined accuracy of the measuring instruments, the

measurement techniques used, and all other sources of error in the test procedure.

The details of the instrumentation used shall be provided in any report of results.

5 General safety considerations
5.1 General

The safety of secondary cells and batteries requires the consideration of two sets of applied

conditions:
1) intended use;
2) reasonably foreseeable misuse.

Cells and batteries shall be so designed and constructed that they are safe under conditions

of both intended use and reasonably foreseeable misuse. It is expected that cells or batteries

subjected to misuse may fail to function following such experience. They shall not however

present significant hazards. It may also be expected that cells and batteries subjected to

intended use shall not only be safe but shall continue to be functional in all respects.

Potential hazards which are the subject of this document are:
• fire,
• burst/explosion,
• leakage of cell electrolyte,
• venting,
• burns from excessively high external temperatures,
• rupture of battery case with exposure of internal components.

Conformity with 5.2 to 5.7 for cells and batteries other than button cells is checked by

inspection, by the tests of Clauses 7, and in accordance with the appropriate standard (see

Clause 2 and Table 1).
5.2 Insulation and wiring

The insulation resistance between the positive terminal and externally exposed metal surfaces

of the battery excluding electrical contact surfaces shall be not less than 5 MΩ at 500 V DC

when measured 60 s after applying the voltage.

Internal wiring and insulation should be sufficient to withstand the maximum anticipated

current, voltage and temperature requirements. The orientation of wiring should be such that

adequate clearances and creepage distances are maintained between conductors. The

mechanical integrity of internal connections should be sufficient to accommodate conditions of

reasonably foreseeable misuse (i.e. solder alone is not considered a reliable means of

connection).
5.3 Venting

Battery cases and cells shall incorporate a pressure relief mechanism or shall be so

constructed that they will relieve excessive internal pressure at a value and rate that will

preclude rupture, explosion and self-ignition. If encapsulation is used to support cells within

an outer case, the type of encapsulant and the method of encapsulation shall neither cause

the battery to overheat during normal operation nor inhibit pressure relief.
---------------------- Page: 15 ----------------------
SIST EN 62133-1:2018
– 10 – IEC 62133-1:2017 © IEC 2017
5.4 Temperature, voltage and current management

The design of batteries shall be such that abnormal temperature-rise conditions are

prevented. Batteries shall be designed to be within temperature, voltage and current limits

specified by the cell manufacturer. Batteries shall be provided with specifications and

charging instructions for equipment manufacturers so that associated chargers are designed

to maintain charging within the temperature, voltage and current limits specified.

Where necessary, applicable means can be provided to limit current to safe levels during

charge and discharge.
5.5 Terminal contacts

The size and shape of the terminal contacts shall ensure that they can carry the maximum

anticipated current. External terminal contact surfaces shall be formed from conductive

materials with good mechanical strength and corrosion resistance. Terminal contacts shall be

arranged so as to minimize the risk of short circuits.
5.6 Assembly of cells into batteries

If there is more than one battery housed in a single battery case, cells used in the assembly

of each battery shall have closely matched capacities, be of the same design, be of the same

chemistry and be from the same manufacturer. The battery shall have some type of safety

device or feature for charging.
Manufacturers of cells shall specif
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.