ISO 11084-1:1993

Graphic technology — Register systems for photographic materials, foils and paper — Part 1: Three-pin systems

Specifies the positions and dimensions for the pins and holes of three-pin register systems to achieve accurate positioning of originals, separations and printing plates on press and prepress equipment. Applies to punched materials, e.g. photographic materials, foils and papers; machines and devices for punching the above materials; machines and devices using register systems. Does not apply to punched metallic materials.

Technologie graphique — Systèmes de positionnement pour matériaux photographiques, feuilles et papier — Partie 1: Systèmes à trois broches

Grafična tehnologija - Registrski sistemi za fotografske materiale, folije in papir - 1. del: Tritočkovni sistemi

General Information

• Status: Published
• Publication Date: 21-Apr-1993
• ICS: 37.100.20 - Materials for graphic technology
• Technical Committee: ISO/TC 130 - Graphic technology
• Drafting Committee: ISO/TC 130/WG 4 - Media and materials
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 13-Sep-2023
• Ref Project: SIST ISO 11084-1:1997 - Graphic technology -- Register systems for photographic materials, foils and paper -- Part 1: Three-pin systems

Standards Content (Sample)

INTERNATIONAL
ISO
STANDARD
11084-1
First edition
1993-04-15
Graphit technology - Register Systems
for photographic materials, foils and
Paper -
Part 1:
Three-pin Systems
Technologie graphique
- Systemes de positionnement pour matbriaux
photographiques, feuilles et papier -
Partie 1: SystGmes 2 trois broches
Reference number
ISO 11084-1 :1993(E)

---------------------- Page: 1 ----------------------
ISO 11084=1:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11084-1 was prepared by Technical Committee
lSO/TC 130, Graphit technology.
ISO 11084 consists of the following Parts, under the general title Graphit
technology - Register systems for photographic materials, foils and pa-
per.
- Part 1: Three-pin Systems
0 ISO 1993
All rights reserved. No patt of this publication may be reproduced or utilized in any form or
by any means, electronie or mechanical, including photocopying and microfilm, without per-
mission in writing from the publisher.
International Organkation for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
ISO 11084~1:1993(E) -
Introduction
lt is intended to develop International Standards to reduce the variety of
register Systems in graphic technology to achieve greater economy in the
use of consumable materials and processing equipment.
ISO 11084 relates to photographic materials, foils and Paper, and other
non-metallic materials. Metallic printing plates, forms etc. have different
mechanical properties, and will be the subject of a future International
Standard.
This part of ISO 11084 covers the three-pin System, giving central align-
ment of the punched material. Future Parts are planned to cover two-pin
Systems, giving edge alignment, and two- and three-pin Systems, which
allow a smaller margin and thereby reduce material wastage.
. . .
Ill

---------------------- Page: 3 ----------------------
This page intentionally left blank

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD
ISO 11084=1:1993(E)
Graphit technology - Register Systems for
photographic materials, foils and Paper -
Part 1:
Three-pin Systems
1 Scope 3 Definitions
This part of ISO 11084 specifies the positions and di- For the purposes of this part of ISO 11084, the fol-
mensions for the pins and holes of three-pin register lowing definitions apply.
Systems to achieve accurate positioning of Originals,
Separations and printing plates on press and prepress
3.1 register System: An arrangement of pins and
equipment.
holes to achieve accurate positioning of Originals,
Separations and printing plates on press and prepress
This patt of ISO 11084 is applicable to
equipment.
- punched materials, e.g. photographic materials,
3.2 register: The accuracy by which the required
foils and Papers;
Position of the reproducible details in a sequence of
operations is achieved, e.g. the overprinting of the
- machines and devices for punching the above
Single separated colours in colour printing.
materials;
3.3 register hole: A hole in the material designed to
- machines and devices using register Systems.
receive the register pin.
lt is not applicable to punched metallic materials.
3.4 register pin: A stud, the longitudinal axis of
which is normal to the surface, wh
...

SLOVENSKI STANDARD
SIST ISO 11084-1:1997
01-junij-1997
*UDILþQDWHKQRORJLMD5HJLVWUVNLVLVWHPL]DIRWRJUDIVNHPDWHULDOHIROLMHLQSDSLU
GHO7ULWRþNRYQLVLVWHPL
Graphic technology -- Register systems for photographic materials, foils and paper --
Part 1: Three-pin systems
Technologie graphique -- Systèmes de positionnement pour matériaux photographiques,
feuilles et papier -- Partie 1: Systèmes à trois broches
Ta slovenski standard je istoveten z: ISO 11084-1:1993
ICS:
37.100.20 0DWHULDOL]DJUDILþQRWHKQLNR Materials for graphic
technology
SIST ISO 11084-1:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 11084-1:1997

---------------------- Page: 2 ----------------------

SIST ISO 11084-1:1997
INTERNATIONAL
ISO
STANDARD
11084-1
First edition
1993-04-15
Graphit technology - Register Systems
for photographic materials, foils and
Paper -
Part 1:
Three-pin Systems
Technologie graphique
- Systemes de positionnement pour matbriaux
photographiques, feuilles et papier -
Partie 1: SystGmes 2 trois broches
Reference number
ISO 11084-1 :1993(E)

---------------------- Page: 3 ----------------------

SIST ISO 11084-1:1997
ISO 11084=1:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11084-1 was prepared by Technical Committee
lSO/TC 130, Graphit technology.
ISO 11084 consists of the following Parts, under the general title Graphit
technology - Register systems for photographic materials, foils and pa-
per.
- Part 1: Three-pin Systems
0 ISO 1993
All rights reserved. No patt of this publication may be reproduced or utilized in any form or
by any means, electronie or mechanical, including photocopying and microfilm, without per-
mission in writing from the publisher.
International Organkation for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 4 ----------------------

SIST ISO 11084-1:1997
ISO 11084~1:1993(E) -
Introduction
lt is intended to develop International Standards to reduce the variety of
register Systems in graphic technology to achieve greater economy in the
use of consumable materials and processing equipment.
ISO 11084 relates to photographic materials, foils and Paper, and other
non-metallic materials. Metallic printing plates, forms etc. have different
mechanical properties, and will be the subject of a future International
Standard.
This part of ISO 11084 covers the three-pin System, giving central align-
ment of the punched material. Future Parts are planned to cover two-pin
Systems, giving edge alignment, and two- and three-pin Systems, which
allow a smaller margin and thereby reduce material wastage.
. . .
Ill

---------------------- Page: 5 ----------------------

SIST ISO 11084-1:1997
This page intentionally left blank

---------------------- Page: 6 ----------------------

SIST ISO 11084-1:1997
INTERNATIONAL STANDARD
ISO 11084=1:1993(E)
Graphit technology - Register Systems for
photographic materials, foils and Paper -
Part 1:
Three-pin Systems
1 Scope 3 Definitions
This part of ISO 11084 specifies the positions and di- For the purposes of this part of ISO 11084, the fol-
mensions for the pins and holes of three-pin register lowing definitions apply.
Systems to achieve accurate positioning of Originals,
Separations and printing plates on press and prepress
3.1 register System: An arrangement of pins and
equipment.
holes to achieve accurate positioning of Originals,
Separations and printing plates on press and prepress
This patt of ISO 11084 is applicable to
equipment.
- punched materials, e.g. photographi
...