EN ISO 12625-4:2016

Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016)

ISO 12625-4:2016 specifies a test method for the determination of the tensile strength, stretch at maximum force and tensile energy absorption of tissue paper and tissue products. It uses a tensile-testing apparatus operating with a constant rate of elongation.
It also specifies the method of calculating the tensile index and the tensile energy absorption index.
In cases where impurities and contraries have to be determined, ISO 15755[6] applies for these detections in tissue paper and tissue products.

Tissue-Papier und Tissue-Produkte - Teil 4: Bestimmung der breitenbezogenen Bruchkraft, der Dehnung bei maximaler Kraft und des Arbeitsaufnahmevermögens (ISO 12625-4:2016)

Dieses Dokument legt ein Prüfverfahren zur Bestimmung der breitenbezogenen Bruchkraft, der Dehnung bei maximaler Kraft und des Arbeitsaufnahmevermögens von Tissue-Papier und Tissue-Produkten fest. Hierfür wird ein Zugprüfgerät eingesetzt, das mit konstanter Dehnungsgeschwindigkeit arbeitet.
Es wird zudem ein Verfahren zur Berechnung des Bruchkraftindexes und des Arbeitsaufnahmevermögen-Indexes festgelegt.
In Fällen, in denen Unreinheiten und Verunreinigungen zu bestimmen sind, erfolgt deren Erkennung in Tissue-Papier und Tissue-Produkten nach ISO 15755 [6].

Papier tissue et produits tissue - Partie 4: Détermination de la résistance à la rupture par traction, de l'allongement à la force maximale et de l'absorption d'énergie à la rupture par traction (ISO 12625-4:2016)

ISO 12625-4:2016 spécifie une méthode d'essai pour la détermination de la résistance à la rupture par traction, de l'allongement à la force maximale et de l'absorption d'énergie à la rupture par traction du papier tissue et des produits tissue. Elle utilise un appareil d'essai de traction fonctionnant à une vitesse d'allongement constante.
Elle spécifie également la méthode de calcul de l'indice de rupture par traction et de l'indice d'énergie absorbée à la rupture par traction.
Lorsque les impuretés et les défauts doivent être déterminés, l'ISO 15755[6] s'applique pour ces détections dans le papier tissue et les produits tissue.

Tissue papir in proizvodi iz tissue papirja - 4. del: Ugotavljanje natezne trdnosti, raztega pri največji sili in absorpcijske natezne energije (ISO 12625-4:2016)

Ta dokument določa preskusno metodo za določanje natezne trdnosti, raztega pri največji sili in absorpcijske natezne energije tissue papirja in proizvodov iz tissue papirja. Uporablja napravo za preskušanje natega, ki deluje s stalno hitrostjo raztezanja.
Določa tudi način izračuna nateznega indeksa in indeksa absorpcijske natezne energije. V primerih, ko je treba določiti nečistoče in nasprotja v tissue papirju in proizvodih iz tissue papirja, se uporablja standard ISO 15755 [6].

General Information

• Status: Withdrawn
• Publication Date: 20-Dec-2016
• Withdrawal Date: 13-Apr-2025
• ICS: 85.060 - Paper and board
• ICS: 85.080 - Paper products
• ICS: 85.080.20 - Tissue paper
• Technical Committee: CEN/TC 172 - Pulp, paper and board
• Drafting Committee: CEN/TC 172/WG 8 - Test methods for soft tissue papers
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-Sep-2022
• Completion Date: 14-Apr-2025
• Ref Project: SIST EN ISO 12625-4:2017 - Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016)

Relations

• Replaces: EN ISO 12625-4:2005 - Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption (ISO 12625-4:2005)
• Effective Date: 28-Dec-2016
• Replaced By: EN ISO 12625-4:2022 - Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2022)
• Effective Date: 15-Jan-2020

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2017
1DGRPHãþD
SIST EN ISO 12625-4:2005
7LVVXHSDSLULQSURL]YRGLL]WLVVXHSDSLUMDGHO8JRWDYOMDQMHQDWH]QHWUGQRVWL
UD]WHJDSULQDMYHþMLVLOLLQDEVRUSFLMVNHQDWH]QHHQHUJLMH,62
Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at
maximum force and tensile energy absorption (ISO 12625-4:2016)
Tissue-Papier und Tissue-Produkte - Teil 4: Bestimmung der breitenbezogenen
Bruchkraft, der Dehnung bei maximaler Kraft und des Arbeitsaufnahmevermögens (ISO
12625-4:2016)
Papier tissue et produits tissue - Partie 4: Détermination de la résistance à la rupture par
traction, de l'allongement à la force maximale et de l'absorption d'énergie à la rupture par
traction (ISO 12625-4:2016)
Ta slovenski standard je istoveten z: EN ISO 12625-4:2016
ICS:
85.080.20 Tissue papir Tissue paper
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 12625-4
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2016
EUROPÄISCHE NORM
ICS 85.060 Supersedes EN ISO 12625-4:2005
English Version
Tissue paper and tissue products - Part 4: Determination
of tensile strength, stretch at maximum force and tensile
energy absorption (ISO 12625-4:2016)
Papier tissue et produits tissue - Partie 4: Tissue-Papier und Tissue-Produkte - Teil 4:
Détermination de la résistance à la rupture par Bestimmung der breitenbezogenen Bruchkraft, der
traction, de l'allongement à la force maximale et de Dehnung bei maximaler Kraft und des
l'absorption d'énergie à la rupture par traction (ISO Arbeitsaufnahmevermögens (ISO 12625-4:2016)
12625-4:2016)
This European Standard was approved by CEN on 21 November 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12625-4:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 12625-4:2016) has been prepared by Technical Committee ISO/TC 6 "Paper,
board and pulps" in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be
withdrawn at the latest by June 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 12625-4:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 12625-4:2016 has been approved by CEN as EN ISO 12625-4:2016 without any
modification.
INTERNATIONAL ISO
STANDARD 12625-4
Second edition
2016-12-01
Tissue paper and tissue products —
Part 4:
Determination of tensile strength,
stretch at maximum force and tensile
energy absorption
Papier tissue et produits tissue —
Partie 4: Détermination de la résistance à la rupture par traction, de
l’allongement à la force maximale et de l’absorption d’énergie à la
rupture par traction
Reference number
ISO 12625-4:2016(E)
©
ISO 2016
ISO 12625-4:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

ISO 12625-4:2016(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Conditioning . 3
7 Preparation of test pieces . 3
7.1 General . 3
7.2 Dimensions . 3
7.3 Number of test pieces . 4
8 Procedure. 4
9 Calculation . 4
9.1 General . 4
9.2 Tensile strength . 4
9.3 Tensile index . 5
9.4 Stretch at maximum force . 5
9.5 Tensile energy absorption . 5
9.6 Tensile energy absorption index . 6
10 Test report . 6
Annex A (informative) Precision . 7
Bibliography . 9
ISO 12625-4:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
This document was prepared by the European Committee Standardization (CEN) Technical Committee
CEN/TC 172, Pulp, paper and board, in collaboration with ISO Technical Committee TC 6, Paper, board
and pulps, Subcommittee SC 2, Test methods and quality specifications for paper and board, in accordance
with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 12625-4:2005), which has been
technically revised with the following changes:
a) “stretch at break” was replaced by “stretch at maximum force”;
b) in Clause 7, a more detailed description of the preparation of the test pieces was included;
c) the number of test pieces required has been clarified with more detailed information;
d) in Clause 8, the procedure for the measurement was clarified;
e) in Clause 10, additional information is to be included in the test report;
f) this document has been editorially updated.
A list of all parts in the ISO 12625 series can be found on the ISO website.
iv © ISO 2016 – All rights reserved

INTERNATIONAL STANDARD ISO 12625-4:2016(E)
Tissue paper and tissue products —
Part 4:
Determination of tensile strength, stretch at maximum
force and tensile energy absorption
1 Scope
This document specifies a test method for the determination of the tensile strength, stretch at
maximum force and tensile energy absorption of tissue paper and tissue products. It uses a tensile-
testing apparatus operating with a constant rate of elongation.
It also specifies the method of calculating the tensile index and the tensile energy absorption index.
[6]
In cases where impurities and contraries have to be determined, ISO 15755 applies for these
detections in tissue paper and tissue products.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 186, Paper and board — Sampling to determine average quality
ISO 187, Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for
monitoring the atmosphere and conditioning of samples
ISO 1924-2, Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation
method (20 mm/min)
ISO 7500-1, Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1:
Tension/compression testing machines — Calibration and verification of the force-measuring system
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 12625-1 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: ava
...