ASTM D6384-18
(Terminology)Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants
Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants
SCOPE
1.1 This terminology covers definitions relating to biodegradability and ecotoxicity of lubricants.
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D6384 − 18
Standard Terminology Relating to
1
Biodegradability and Ecotoxicity of Lubricants
This standard is issued under the fixed designation D6384; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* biomass, n—biological material including any material other
than fossil fuels which is or was a living organism or
1.1 This terminology covers definitions relating to biode-
component or product of a living organism.
gradability and ecotoxicity of lubricants.
DISCUSSION—In biology and environmental science, biomass is
1.2 This international standard was developed in accor-
typically expressed as density of biological material per unit sample
2
dance with internationally recognized principles on standard- volume, area, or mass (g biomass/g(or/mLor/cm ) sample); when
used for products derived from organisms biomass is typically ex-
ization established in the Decision on Principles for the
3
pressed in terms of mass (kg, MT, etc.) or volume (L, m , bbl, etc.).
Development of International Standards, Guides and Recom-
mendations issued by the World Trade Organization Technical
DISCUSSION—Products of living organisms include those materials
produced directly by living organisms as metabolites (for example,
Barriers to Trade (TBT) Committee.
ethanol, various carbohydrates and fatty acids), materials manufactured
by processing living organisms (for example, pellets manufactured by
2. Referenced Documents
shredding and pelletizing plant material) and materials produced by
2
2.1 ASTM Standards:
processing living organisms, their components or metabolites (for
D5864 Test Method for Determining Aerobic Aquatic Bio-
example, transesterified oil; also called biodiesel).
degradation of Lubricants or Their Components
blank, n—in biodegradability testing, a test system containing
D6139 Test Method for Determining the Aerobic Aquatic
all system components with the exception of the test
Biodegradation of Lubricants or Their Components Using
material.
the Gledhill Shake Flask
chronic ecotoxicity test, n—a comparative ecotoxicity test in
3. Terminology
which a representative subpopulation of organisms is ex-
posedtodifferenttreatratesofatestmaterialandisobserved
activated sludge, n—the precipitated solid matter, consisting
foraperiodoftimewhichconstitutesamajorportionoftheir
mainly of bacteria and other aquatic microrganisms, that is
life span.
producedatadomesticwastewatertreatmentplant;activated
ecotoxicity, n—the propensity of a test material to produce
sludge is used primarily in secondary sewage treatment to
microbially oxidize dissolved organic matter in the effluent. adverse behavioral, biochemical, or physiological effects in
non-human organisms or populations.
D6139
effect load XX (ELXX), n—a statistically or graphically
aerobic, adj—(1 ) taking place in the presence of oxygen; (2)
estimated loading rate of test material that is expected to
living or active in the presence of oxygen. D6139
cause one or more specified effects in XX % of a represen-
biodegradation, n—the process of chemical break-down or
tative subpopulation of organisms under specified condi-
transformation of a material caused by organisms or their
tions.
enzymes. D5864
DISCUSSION—Thisterminologyshouldbeusedinsteadofthestandard
ECXX when the test material is not completely soluble at the test treat
DISCUSSION—Biodegradation is only one mechanism by which ma-
rates.
terials are transformed in the environment.
environmental compartment, n—a subdivision of the envi-
ronment based on physical or chemical properties, or both.
1
This terminology is under the jurisdiction of ASTM Committee D02 on
DISCUSSION—Examples of environmental compartments are aerobic
Petroleum Products, Liquid Fuels, and Lubricants and is the direct responsibility of
fresh water, aerobic marine, aerobic soil, and anaerobic media. The
D02.12 on Environmental Standards for Lubricants.
results of test procedures may be applied to environmental
Current edition approved June 1, 2018. Published June 2018. Originally
compartments, but the test systems do not constitute an environmental
approved in 1999. Last previous edition approved in 2017 as D6384 – 17. DOI:
compartment.
10.1520/D6384-18.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
fresh water environment, n—in ecotoxicity testing, the
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
aerobic, aqueous compartment, characteristically with a
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. sodium chloride content of
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: D6384 − 17 D6384 − 18
Standard Terminology Relating to
1
Biodegradability and Ecotoxicity of Lubricants
This standard is issued under the fixed designation D6384; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
1.1 This terminology covers definitions relating to biodegradability and ecotoxicity of lubricants.
1.2 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2
2.1 ASTM Standards:
D5864 Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
D6139 Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill
Shake Flask
3. Terminology
activated sludge, n—the precipitated solid matter, consisting mainly of bacteria and other aquatic microrganisms, that is produced
at a domestic wastewater treatment plant; activated sludge is used primarily in secondary sewage treatment to microbially
oxidize dissolved organic matter in the effluent. D6139
aerobic, adj—(1 ) taking place in the presence of oxygen; (2) living or active in the presence of oxygen. D6139
biodegradation, n—the process of chemical break-down or transformation of a material caused by organisms or their enzymes.
D5864
DISCUSSION—
Biodegradation is only one mechanism by which materials are transformed in the environment.
biomass, n—biological material including any material other than fossil fuels which is or was a living organism or component or
product of a living organism.
DISCUSSION—
In biology and environmental science, biomass is typically expressed as density of biological material per unit sample volume, area, or mass (g biomass
2
/ g (or / mL or / cm ) sample); when used for products derived from organisms biomass is typically expressed in terms of mass (kg, MT, etc.) or volume
3
(L, m , bbl, etc.).
DISCUSSION—
Products of living organisms include those materials produced directly by living organisms as metabolites (for example, ethanol, various carbohydrates
and fatty acids), materials manufactured by processing living organisms (for example, pellets manufactured by shredding and pelletizing plant material)
and materials produced by processing living organisms, their components or metabolites (for example, transesterified oil; also called biodiesel).
1
This terminology is under the jurisdiction of ASTM Committee D02 on Petroleum Products, Liquid Fuels, and Lubricants and is the direct responsibility of D02.12 on
Environmental Standards for Lubricants.
Current edition approved April 1, 2017June 1, 2018. Published May 2017June 2018. Originally approved in 1999. Last previous edition approved in 20112017 as
D6384 – 11.D6384 – 17. DOI: 10.1520/D6384-17.10.1520/D6384-18.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
D6384 − 18
blank, n—in biodegradability testing, a test system containing all system components with the exception of the test material.
chronic ecotoxicity test, n—a comparative ecotoxicity test in which a representative subpopulation of organisms is exposed to
different treat rates of a test material and is observed for a period of time which constitutes a major portion of their life span.
ecotoxicity, n—the propensity of a test material to produce adverse behavioral, biochemical, or physiological effects in non-human
organisms or populations.
effect load XX (ELXX), n—a statistically or graphically estimated loading rate of test material that is expected to cause one or
more specified effects in XX % of a representative subpopulation of organisms under specified conditions.
DISCUSSION—
This terminology should be used in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.