ASTM E2214-08
(Practice)Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
SIGNIFICANCE AND USE
In today's commerce, instrument makers and instrument users must deal with a large array of bench-top and portable color-measuring instruments, many with different geometric and spectral characteristics. At the same time, manufacturers of colored goods are adopting quality management systems that require periodic verification of the performance of the instruments that are critical to the quality of the final product. The technology involved in optics and electro-optics has progressed greatly over the last decade. The result has been a generation of instruments that are both more affordable and higher in performance. What had been a tool for the research laboratory is now available to the retail point of sale, to manufacturing, to design and to corporate communications. New documentary standards have been published that encourage the use of colorimeters, spectrocolorimeters, and colorimetric spetrometers in applications previously dominated by visual expertise or by filter densitometers. Therefore, it is necessary to determine if an instrument is suitable to the application and to verify that an instrument or instruments are working within the required operating parameters.
This practice provides descriptions of some common instrumental parameters that relate to the way an instrument will contribute to the quality and consistency of the production of colored goods. It also describes some of the material standards required to assess the performance of a color-measuring instrument and suggests some tests and test reports to aid in verifying the performance of the instrument relative to its intended application.SCOPE
1.1 This practice provides standard terms and procedures for describing and characterizing the performance of spectral and filter based instruments designed to measure and compute the colorimetric properties of materials and objects. It does not set the specifications but rather gives the format and process by which specifications can be determined, communicated and verified.
1.2 This practice does not describe methods that are generally applicable to visible-range spectroscopic instruments used for analytical chemistry (UV-VIS spectrophotometers). ASTM Committee E13 on Molecular Spectroscopy and Chromatography includes such procedures in standards under their jurisdiction.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information.
Designation: E2214 – 08
Standard Practice for
Specifying and Verifying the Performance of Color-
1
Measuring Instruments
This standard is issued under the fixed designation E2214; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
Recent advances in optics, electronics and documentary standard have resulted in a proliferation of
instruments for the measurement of color and appearance of materials and objects.These instruments
possessverygoodperformancebuttherehasbeenlittleprogresstowardstandardizingtheterminology
and procedures to quantify that performance. Therefore, the commercial literature and even some
documentary standards are a mass of confusing terms, numbers and specifications that are impossible
to compare or interpret.
Two recent papers in the literature, have proposed terms and procedures to standardize the
specification, comparison and verification of the level of performance of a color-measuring
,
23
instrument. Followingthoseprocedures,thosespecificationscanbecomparedtoproducttolerances.
Thisbecomesimportantsothatinstrumentusersandinstrumentmakerscanagreeonhowtocompare
or verify, or both, that their instruments are performing in the field as they were designed and tested
in the factory.
1. Scope 1.3 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
1.1 This practice provides standard terms and procedures
responsibility of the user of this standard to establish appro-
for describing and characterizing the performance of spectral
priate safety and health practices and determine the applica-
and filter based instruments designed to measure and compute
bility of regulatory limitations prior to use.
the colorimetric properties of materials and objects. It does not
setthespecificationsbutrathergivestheformatandprocessby
2. Referenced Documents
which specifications can be determined, communicated and
4
2.1 ASTM Standards:
verified.
D2244 Practice for Calculation of Color Tolerances and
1.2 This practice does not describe methods that are gener-
Color Differences from Instrumentally Measured Color
ally applicable to visible-range spectroscopic instruments used
Coordinates
for analytical chemistry (UV-VIS spectrophotometers).ASTM
E284 Terminology of Appearance
Committee E13 on Molecular Spectroscopy and Chromatog-
E1164 Practice for Obtaining Spectrometric Data for
raphy includes such procedures in standards under their juris-
Object-Color Evaluation
diction.
2.2 Other Documents:
ISO VIM International Vocabulary of Basic and General
1
This practice is under the jurisdiction ofASTM Committee E12 on Color and
5
Terms in Metrology (VIM)
Appearance and is the direct responsibility of Subcommittee E12.04 on Color and
Appearance Analysis.
Current edition approved Jan. 1, 2008. Published January 2008. Originally
4
approved in 2002. Last previous edition approved in 2002 as E2214-02. DOI: For referenced ASTM standards, visit the ASTM website, www.astm.org, or
10.1520/E2214-08. contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
2
Ladson, J., “Colorimetric Data Comparison of Bench-Top and Portable Standards volume information, refer to the standard’s Document Summary page on
Instruments,” AIC Interim Meeting, Colorimetry, Berlin, 1995. the ASTM website.
3 5
Rich, D., “Standardized Terminology and Procedures for Specifying and ISO/IDE/OIML/BIPM, International Vocabulary of Basic and General Terms
Verifying the Performance of Spectrocolorimeters,” AIC Color 97 Kyoto, Kyoto in Metrology, International Organization for Standardization, Geneva, Switzerland,
1997. 1984.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
E2214 – 08
NIST Technical Note 1297 Guidelines for Evaluating and i=1to N readings. Any standard color difference or color
Expressing the Uncertainty of NIST Measurement Re- tolerance equation can be used as long as the report clearly
6
sults identifies the equation being used (see Practice D2244).
4. Summary of Practice
3. Terminology
4.1 This practice defines standardized terms for the most
3.1 Definitions of appearance terms in Terminology E284
common instrument measurement performance parameters
are applicable to this pracitce.
(repeatability, reproducibility, inter-instrument agreement,
3.2 Definitions of metrology terms in ISO, International
inter-model instrument agreement, accuracy) and describes a
Vocabulary of Basic and General Terms in Metrology (VIM)
setofmeasurementsandartifa
...
This document is not anASTM standard and is intended only to provide the user of anASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:E2214–02 Designation: E 2214 – 08
Standard Practice for
Specifying and Verifying the Performance of Color-
1
Measuring Instruments
This standard is issued under the fixed designation E2214; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
Recent advances in optics, electronics and documentary standard have resulted in a proliferation of
instruments for the measurement of color and appearance of materials and objects.These instruments
possessverygoodperformancebuttherehasbeenlittleprogresstowardstandardizingtheterminology
and procedures to quantify that performance. Therefore, the commercial literature and even some
documentary standards are a mass of confusing terms, numbers and specifications that are impossible
to compare or interpret.
Two recent papers in the literature, have proposed terms and procedures to standardize the
specification, comparison and verification of the level of performance of a color-measuring
,
23
instrument. Followingthoseprocedures,thosespecificationscanbecomparedtoproducttolerances.
Thisbecomesimportantsothatinstrumentusersandinstrumentmakerscanagreeonhowtocompare
or verify, or both, that their instruments are performing in the field as they were designed and tested
in the factory.
1. Scope
1.1 Thispracticeprovidesstandardtermsandproceduresfordescribingandcharacterizingtheperformanceofspectralandfilter
based instruments designed to measure and compute the colorimetric properties of materials and objects. It does not set the
specifications but rather gives the format and process by which specifications can be determined, communicated and verified.
1.2 This practice does not describe methods that are generally applicable to visible-range spectroscopic instruments used for
analytical chemistry (UV-VIS spectrophotometers). ASTM Committee E13 on Molecular Spectroscopy and Chromatography
includes such procedures in standards under their jurisdiction.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Referenced Documents
4
2.1 ASTM Standards:
D2244 Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
E284 Terminology of Appearance
E1164 Practice for Obtaining SpectrophotometricSpectrometric Data for Object-Color Evaluation
2.2 Other Documents:
5
ISO International Vocabulary of Basic and General Terms in Metrology (VIM)
NIST Technical Note 1297 Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement ResultsDIN
1
This practice is under the jurisdiction of ASTM Committee E12 on Color and Appearance and is the direct responsibility of Subcommittee E12.04 on Color and
Appearance Analysis.
Current edition approved June 10, 2002. Published August 2002.
Current edition approved Jan. 1, 2008. Published January 2008. Originally approved in 2002. Last previous edition approved in 2002 as E2214-02.
2
Ladson, J., “Colorimetric Data Comparison of Bench-Top and Portable Instruments,” AIC Interim Meeting, Colorimetry, Berlin, 1995.
3
Rich, D., “Standardized Terminology and Procedures for Specifying and Verifying the Performance of Spectrocolorimeters,” AIC Color 97 Kyoto, Kyoto 1997.
4
ForreferencedASTMstandards,visittheASTMwebsite,www.astm.org,orcontactASTMCustomerServiceatservice@astm.org.For Annual Book of ASTM Standards
, Vol 06.01.volume information, refer to the standard’s Document Summary page on the ASTM website.
5
ISO/IDE/OIML/BIPM, International Vocabulary of Basic and General Terms in Metrology, International Organization for Standardization, Geneva, Switzerland, 1984.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
E2214–08
6
55600Bestimmung der Signifikanz von Farbabständen bei Körperfarben nach der CIELAB-Formel
3. Terminology
3.1 Definitions of appearance terms in Terminology E284 are applicable to this pracitce.
3.2 Definitions of metrology terms in ISO, International Vocabulary of Basic and General Terms in Metrology (VIM) are
applicable to this practice.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.