ASTM E1519-15
(Terminology)Standard Terminology Relating to Agricultural Tank Mix Adjuvants
Standard Terminology Relating to Agricultural Tank Mix Adjuvants
SCOPE
1.1 This terminology is used or is likely to be used in test methods, specifications, guides, and practices related to agricultural tank mix adjuvants.
1.2 These definitions are written to ensure that standards related to agricultural tank mix adjuvants are properly understood and interpreted.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E1519 − 15
StandardTerminology Relating to
1
Agricultural Tank Mix Adjuvants
This standard is issued under the fixed designation E1519; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope alkalinity agent—a material that can be added to the spray
mixture to raise the pH.
1.1 This terminology is used or is likely to be used in test
methods, specifications, guides, and practices related to agri-
amphoteric surfactant—a surface-active agent capable of
cultural tank mix adjuvants.
forming, in aqueous solution, either surface-active anions or
surface-active cations depending on the pH.
1.2 These definitions are written to ensure that standards
related to agricultural tank mix adjuvants are properly under-
anionic surfactant—surface-active agent in which the hydro-
stood and interpreted.
philic portion of the molecule forms exclusively a negative
ion (anion) when placed in aqueous solution.
2. Referenced Documents
2
antifoaming agent—a material used to inhibit or prevent the
2.1 ASTM Standards:
formation of foam.
D459 Terminology Relating to Soaps and Other Detergents
D483 Test Method for Unsulfonated Residue of Petroleum
attractant—a material that attracts specific pests.
Plant Spray Oils
basic blend—a combination of wetting agent and buffering
E609 Terminology Relating to Pesticides
agent that maintains a pH of the spray mixture greater than
D2140 Practice for Calculating Carbon-Type Composition
7.
of Insulating Oils of Petroleum Origin
buffer or buffering agent—a compound or mixture that, when
3. Terminology
contained in solution, causes the solution to resist change in
3.1 Terms and Definitions:
pH. Each buffer has a characteristic limited range of pH over
absorption—a process in which one material (the absorbent)
which it is effective.
takes in and retains another (the absorbate).
canopy penetrating agent—an adjuvant that increases the
acidifier—a material that can be added to spray mixtures to
penetration of the spray material into the crop canopy. See
lower the pH.
deposition aid.
activator—a material that increases the biological efficacy of
cationic surfactant—a surface-active agent in which the
agrichemicals.
hydrophilic portion of the molecule forms exclusively a
positive ion (cation) when placed in aqueous solution.
active ingredient—a component of the formulation that pro-
duces a specific effect for which the formulation is designed.
colorant—a material used to alter the color of the tank mix.
adjuvant—a material added to a tank mix to aid or modify the
compatibility agent—asurface-activeagentthatallowssimul-
action of an agrichemical, or the physical characteristics of
taneous application of liquid fertilizer and agrichemical, or
the mixture.
two or more agrichemical formulations, as a uniform tank
mix, or improves the homogeneity of the mixture and the
uniformity of the application.
1
This terminology is under the jurisdiction of ASTM Committee E35 on
crop oil concentrate—an emulsifiable petroleum oil-based
Pesticides, Antimicrobials, and Alternative Control Agents and is the direct
responsibility of Subcommittee E35.22 on Pesticide Formulations and Delivery
product containing 15 to 20 % w/w surfactant and a mini-
Systems.
mum of 80 % w/w phytobland oil.
CurrenteditionapprovedJune1,2015.PublishedJuly2015.Originallyapproved
in 1993. Last previous edition approved in 2013 as E1519 – 13. DOI: 10.1520/
crop oil (emulsifiable)—an emulsifiable petroleum oil-based
E1519-15.
2 product containing up to 5 % w/w surfactant and the
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM remainder of a phytobland oil.
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. crop oil (non-emulsifiable)—See phytobland oil.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
E1519 − 15
defoaming agent—a material that eliminates or suppresses nonionic surfactant—a surface-active agent having no ioniz-
foam in the spray tank able polar end groups but comprised of hydrophilic and
lipophilic segments.
deposition aid—a material that improves the ability of ag-
oil—See petroleum, vegetable, paraffinic, and so forth.
richemical sprays to deposit on targeted surfaces.
paraffinic oil—a petroleum oil (derived from paraffin crude
dormant oil—a horticultural spray oil applied during the
oil) whose paraffinic carbon type content is typically greater
dormant p
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: E1519 − 13 E1519 − 15
Standard Terminology Relating to
1
Agricultural Tank Mix Adjuvants
This standard is issued under the fixed designation E1519; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This terminology is used or is likely to be used in test methods, specifications, guides, and practices related to agricultural
tank mix adjuvants.
1.2 These definitions are written to ensure that standards related to agricultural tank mix adjuvants are properly understood and
interpreted.
2. Referenced Documents
2
2.1 ASTM Standards:
D459 Terminology Relating to Soaps and Other Detergents
D483 Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
E609 Terminology Relating to Pesticides
D2140 Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
3. Terminology
3.1 Terms and Definitions:
absorption—a process in which one material (the absorbent) takes in and retains another (the absorbate).
acidifier—a material that can be added to spray mixtures to lower the pH.
activator—a material that increases the biological efficacy of agrichemicals.
active ingredient—a component of the formulation that produces a specific effect for which the formulation is designed.
adjuvant—a material added to a tank mix to aid or modify the action of an agrichemical, or the physical characteristics of the
mixture.
alkalinity agent—a material that can be added to the spray mixture to raise the pH.
amphoteric surfactant—a surface-active agent capable of forming, in aqueous solution, either surface-active anions or
surface-active cations depending on the pH.
anionic surfactant—a surface-active agent in which the activehydrophilic portion of the molecule containing the lipophilic
segment forms exclusively a negative ion (anion) when placed in aqueous solution.
antifoaming agent—a material used to inhibit or prevent the formation of foam.
attractant—a material that attracts specific pests.
basic blend—a combination of wetting agent and buffering agent that maintains a pH of the spray mixture greater than 7.
buffer or buffering agent—a compound or mixture that, when contained in solution, causes the solution to resist change in pH.
Each buffer has a characteristic limited range of pH over which it is effective.
1
This terminology is under the jurisdiction of ASTM Committee E35 on Pesticides, Antimicrobials, and Alternative Control Agents and is the direct responsibility of
Subcommittee E35.22 on Pesticide Formulations and Delivery Systems.
Current edition approved June 1, 2013June 1, 2015. Published October 2013July 2015. Originally approved in 1993. Last previous edition approved in 20102013 as
E1519 – 10.E1519 – 13. DOI: 10.1520/E1519-13.10.1520/E1519-15.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
E1519 − 15
canopy penetrating agent—an adjuvant that increases the penetration of the spray material into the crop canopy. See deposition
aid.
cationic surfactant—a surface-active agent in which the activehydrophilic portion of the molecule containing the lipophilic
segment forms exclusively a positive ion (cation) when placed in aqueous solution.
colorant—a material used to alter the color of the tank mix.
compatibility agent—a surface-active agent that allows simultaneous application of liquid fertilizer and agrichemical, or two or
more agrichemical formulations, as a uniform tank mix, or improves the homogeneity of the mixture and the uniformity of the
application.
crop oil concentrate—an emulsifiable petroleum oil-based product containing 15 to 20 % w/w surfactant and a minimum of 80 %
w/w phytobland oil.
crop oil (emulsifiable)—an emulsifiable petroleum oil-based product containing up to 5 % w/w surfactant and the remainder of
a phytobland oil.
crop oil (non-emulsifiable)—See phytobland oil.
defoaming agent—a material that eliminates or suppresses foam in the spray tank
deposition aid—a material that improves the ability of agric
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.