Standard Practice for Preparation of Fire-Test-Response Standards

SIGNIFICANCE AND USE
4.1 This standard is to be used by those concerned with the development of fire-test-response standards.  
4.2 The resultant fire-test-response standards are intended to be useful in one or more of the following areas, among others: product development, quality control, product comparisons, screening, information to be used as part of a fire hazard or a fire risk assessment, and regulatory purposes.  
4.3 This practice is intended to be useful to users and developers of fire-test-response standards (Section 5) because it provides much of the general rationale for the development and use of such standards.  
4.4 This practice is not intended to provide guidance for the preparation of fire hazard assessment standards or fire risk assessment standards.  
4.5 This practice is not intended to provide guidance for the preparation of standards not related to fire-test responses of materials, products or assemblies.
SCOPE
1.1 This practice is a supplement to Form and Style for ASTM Standards2, which shall be consulted in writing all ASTM standards.  
1.2 This practice contains, directly or by reference, all of the information required to comply with the policy on fire standards and the additional guidelines recommended by Committee E05.  
1.3 This practice, intended to assist ASTM Committees, establishes guidelines and criteria for the preparation of fire-test-response standards (that is, standards for response to heat or flame under prescribed conditions).  
1.4 This fire standard cannot be used to provide quantitative measures.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

Status
Historical
Publication Date
30-Jun-2019
Current Stage
Ref Project

Relations

Buy Standard

Standard
ASTM E535-19 - Standard Practice for Preparation of Fire-Test-Response Standards
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
REDLINE ASTM E535-19 - Standard Practice for Preparation of Fire-Test-Response Standards
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ASTM E535-19 - Standard Practice for Preparation of Fire-Test-Response Standards
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: E535 − 19 An American National Standard
Standard Practice for
1
Preparation of Fire-Test-Response Standards
This standard is issued under the fixed designation E535; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
This standard has been developed to assist ASTM Committees in the writing of fire-test-response
standards that comply with the ASTM policy on fire standards (see Annex A1).
The policy on fire standards describes the types ofASTM fire standards and their required caveats.
Committee E05 has the responsibility of helping other committees developing fire standards by
providing the information and assistance required by all committees for writing standards which
contain testing procedures for the response of materials, products, or assemblies to fire.
Fire-test-response standards are standards for, or based on, one or more fire-test-response
characteristics. A fire-test-response characteristic provides a means of measuring the response of
materials, products, or assemblies to a prescribed source of heat alone or to one of heat and flame
under controlled test conditions.
1. Scope Development of International Standards, Guides and Recom-
mendations issued by the World Trade Organization Technical
1.1 This practice is a supplement to Form and Style for
2 Barriers to Trade (TBT) Committee.
ASTM Standards , which shall be consulted in writing all
ASTM standards.
2. Referenced Documents
1.2 Thispracticecontains,directlyorbyreference,allofthe
3
2.1 ASTM Standards:
information required to comply with the policy on fire stan-
E176 Terminology of Fire Standards
dards and the additional guidelines recommended by Commit-
E456 Terminology Relating to Quality and Statistics
tee E05.
E691 Practice for Conducting an Interlaboratory Study to
1.3 This practice, intended to assist ASTM Committees,
Determine the Precision of a Test Method
establishes guidelines and criteria for the preparation of fire- E2536 GuideforAssessmentofMeasurementUncertaintyin
test-response standards (that is, standards for response to heat
Fire Tests
or flame under prescribed conditions). E2655 Guide for Reporting Uncertainty of Test Results and
Use of the Term Measurement Uncertainty inASTM Test
1.4 This fire standard cannot be used to provide quantitative
Methods
measures.
4
2.2 ISO Standards:
1.5 This standard does not purport to address all of the
ISO 13943 – Fire Safety – Vocabulary
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appro-
3. Terminology
priate safety, health, and environmental practices and deter-
3.1 Definitions:
mine the applicability of regulatory limitations prior to use.
3.1.1 Definitions—For definitions of terms used in this
1.6 This international standard was developed in accor-
practice, refer to Terminology E176 and ISO 13943. In case of
dance with internationally recognized principles on standard-
conflict, the definitions given in Terminology E176 shall
ization established in the Decision on Principles for the
prevail.
1
This practice is under the jurisdiction of ASTM Committee E05 on Fire
3
Standards and is the direct responsibility of Subcommittee E05.31 on Terminology For referenced ASTM standards, visit the ASTM website, www.astm.org, or
and Services / Functions. contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Current edition approved July 1, 2019. Published July 2019. Originally approved Standards volume information, refer to the standard’s Document Summary page on
in 1975. Last previous edition approved in 2014 as E535 – 14. DOI: 10.1520/ the ASTM website.
4
E0535-19. Available from International Organization for Standardization (ISO), ISO
2
Available on request from ASTM Headquarters, 100 Barr Harbor Drive, West Central Secretariat, BIBC II, Chemin de Blandonnet 8, CP 401, 1214 Vernier,
Conshohocken, PA, 19428-2959. Geneva, Switzerland, http://www.iso.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
E535 − 19
3.1.2 fire-test-response characteristic, n—a response char- 5.3.1 The title of the test method shall specify the intended
acteristic of a material, product, or assembly, to a prescribed specific application, clearly and as concisely as is practicable.
source of heat or flame, under controlled fire conditions; suc
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: E535 − 14 E535 − 19 An American National Standard
Standard Practice for
1
Preparation of Fire-Test-Response Standards
This standard is issued under the fixed designation E535; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
This standard has been developed to assist ASTM Committees in the writing of fire-test-response
standards that comply with the ASTM policy on fire standards (see Annex A1).
The policy on fire standards describes the types of ASTM fire standards and their required caveats.
Committee E05 has the responsibility of helping other committees developing fire standards by
providing the information and assistance required by all committees for writing standards which
contain testing procedures for the response of materials, products, or assemblies to fire.
Fire-test-response standards are standards for, or based on, one or more fire-test-response
characteristics. A fire-test-response characteristic provides a means of measuring the response of
materials, products, or assemblies to a prescribed source of heat alone or to one of heat and flame
under controlled test conditions.
1. Scope
2
1.1 This practice is a supplement to Form and Style for ASTM Standards , which shall be consulted in writing all ASTM
standards.
1.2 This practice contains, directly or by reference, all of the information required to comply with the policy on fire standards
and the additional guidelines recommended by Committee E05.
1.3 This practice, intended to assist ASTM Committees, establishes guidelines and criteria for the preparation of fire-test-
response standards (that is, standards for response to heat or flame under prescribed conditions).
1.4 This fire standard cannot be used to provide quantitative measures.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety safety, health, and healthenvironmental practices and determine the
applicability of regulatory limitations prior to use.
1.5 This fire standard cannot be used to provide quantitative measures.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
3
2.1 ASTM Standards:
E176 Terminology of Fire Standards
E456 Terminology Relating to Quality and Statistics
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E2536 Guide for Assessment of Measurement Uncertainty in Fire Tests
E2655 Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
1
This practice is under the jurisdiction of ASTM Committee E05 on Fire Standards and is the direct responsibility of Subcommittee E05.31 on Terminology and Services
/ Functions.
Current edition approved May 1, 2014July 1, 2019. Published June 2014July 2019. Originally approved in 1975. Last previous edition approved in 20122014 as
E535E535 – 14. – 12. DOI: 10.1520/E0535-14.10.1520/E0535-19.
2
Available on request from ASTM Headquarters, 100 Barr Harbor Drive, West Conshohocken, PA, 19428-2959.
3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
E535 − 19
4
2.2 ISO Standards:
ISO 13943 – Fire Safety – Vocabulary
3. Terminology
3.1 Definitions:
3.1.1 Definitions—For definitions of terms used in this practice, refer to Terminology E176. and ISO 13943. In case of conflict,
the definitions given in Terminology E176 shall prevail.
3.1.2 fire-test-response characteristic, n—a response characteristic of a material, product, or assembly, to a prescribed source
of heat or flame, under controlled fire conditions; such response characteristics may include but are not
...

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E535 − 19 An American National Standard
Standard Practice for
1
Preparation of Fire-Test-Response Standards
This standard is issued under the fixed designation E535; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
This standard has been developed to assist ASTM Committees in the writing of fire-test-response
standards that comply with the ASTM policy on fire standards (see Annex A1).
The policy on fire standards describes the types of ASTM fire standards and their required caveats.
Committee E05 has the responsibility of helping other committees developing fire standards by
providing the information and assistance required by all committees for writing standards which
contain testing procedures for the response of materials, products, or assemblies to fire.
Fire-test-response standards are standards for, or based on, one or more fire-test-response
characteristics. A fire-test-response characteristic provides a means of measuring the response of
materials, products, or assemblies to a prescribed source of heat alone or to one of heat and flame
under controlled test conditions.
1. Scope Development of International Standards, Guides and Recom-
mendations issued by the World Trade Organization Technical
1.1 This practice is a supplement to Form and Style for
2 Barriers to Trade (TBT) Committee.
ASTM Standards , which shall be consulted in writing all
ASTM standards.
2. Referenced Documents
1.2 This practice contains, directly or by reference, all of the 3
2.1 ASTM Standards:
information required to comply with the policy on fire stan-
E176 Terminology of Fire Standards
dards and the additional guidelines recommended by Commit-
E456 Terminology Relating to Quality and Statistics
tee E05.
E691 Practice for Conducting an Interlaboratory Study to
1.3 This practice, intended to assist ASTM Committees, Determine the Precision of a Test Method
establishes guidelines and criteria for the preparation of fire-
E2536 Guide for Assessment of Measurement Uncertainty in
test-response standards (that is, standards for response to heat Fire Tests
or flame under prescribed conditions).
E2655 Guide for Reporting Uncertainty of Test Results and
Use of the Term Measurement Uncertainty in ASTM Test
1.4 This fire standard cannot be used to provide quantitative
Methods
measures.
4
2.2 ISO Standards:
1.5 This standard does not purport to address all of the
ISO 13943 – Fire Safety – Vocabulary
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appro-
3. Terminology
priate safety, health, and environmental practices and deter-
3.1 Definitions:
mine the applicability of regulatory limitations prior to use.
3.1.1 Definitions—For definitions of terms used in this
1.6 This international standard was developed in accor-
practice, refer to Terminology E176 and ISO 13943. In case of
dance with internationally recognized principles on standard-
conflict, the definitions given in Terminology E176 shall
ization established in the Decision on Principles for the
prevail.
1
This practice is under the jurisdiction of ASTM Committee E05 on Fire
3
Standards and is the direct responsibility of Subcommittee E05.31 on Terminology For referenced ASTM standards, visit the ASTM website, www.astm.org, or
and Services / Functions. contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Current edition approved July 1, 2019. Published July 2019. Originally approved Standards volume information, refer to the standard’s Document Summary page on
in 1975. Last previous edition approved in 2014 as E535 – 14. DOI: 10.1520/ the ASTM website.
4
E0535-19. Available from International Organization for Standardization (ISO), ISO
2
Available on request from ASTM Headquarters, 100 Barr Harbor Drive, West Central Secretariat, BIBC II, Chemin de Blandonnet 8, CP 401, 1214 Vernier,
Conshohocken, PA, 19428-2959. Geneva, Switzerland, http://www.iso.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
E535 − 19
3.1.2 fire-test-response characteristic, n—a response char- 5.3.1 The title of the test method shall specify the intended
acteristic of a material, product, or assembly, to a prescribed specific application, clearly and as concisely as is practicable.
source of heat or flame, under controlled fire conditions; such 5.3.2 The title of the test method shall not contain the
response characteristics may include but are not limited t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.