Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

ABSTRACT
This specification covers annealed titanium and titanium alloy strip, sheet, and plate. The grades of titanium and titanium alloy metal covered by this specification shall have the chemical composition requirements of: nitrogen, carbon, hydrogen, iron, oxygen, aluminum, vanadium, tin, ruthenium, palladium, cobalt, molybdenum, chromium, nickel, niobium, zirconium, silicon, and titanium. For sheet and strip, the bend test specimen shall stand being bent cold through without fracture in the outside of the bent portion. Product analysis tolerances cover variations between laboratories in the measurement of chemical content of the specimen. In cutting samples for analysis, the operation should be carried out insofar as possible in a dust-free atmosphere because utmost care must be used in sampling titanium for chemical analysis due to its great affinity for elements such as oxygen, nitrogen, and hydrogen. The chemical analysis shall be conducted by the standard techniques normally utilized by the manufacturer and purchaser.
SCOPE
1.1 This specification2 covers annealed titanium and titanium alloy strip, sheet, and plate as follows:  
1.1.1 Grade 1—UNS R50250. Unalloyed titanium,  
1.1.2 Grade 2—UNS R50400. Unalloyed titanium,
1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS),  
1.1.3 Grade 3—UNS R50550. Unalloyed titanium,  
1.1.4 Grade 4—UNS R50700. Unalloyed titanium,  
1.1.5 Grade 5—UNS R56400. Titanium alloy (6 % aluminum, 4 % vanadium),  
1.1.6 Grade 6—UNS R54520. Titanium alloy (5 % aluminum, 2.5 % tin),  
1.1.7 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.7.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS),  
1.1.8 Grade 9—UNS R56320. Titanium alloy (3.0 % aluminum, 2.5 % vanadium),  
1.1.9 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.25 % palladium,  
1.1.10 Grade 12—UNS R53400. Titanium alloy (0.3 % molybdenum, 0.8 % nickel),  
1.1.11 Grade 13—UNS R53413. Titanium alloy (0.5 % nickel, 0.05 % ruthenium),  
1.1.12 Grade 14—UNS R53414. Titanium alloy (0.5 % nickel, 0.05 % ruthenium),  
1.1.13 Grade 15—UNS R53415. Titanium alloy (0.5 % nickel, 0.05 % ruthenium),  
1.1.14 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.14.1 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi (400 MPa) minimum UTS),  
1.1.15 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.08 % palladium,  
1.1.16 Grade 18—UNS R56322. Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium,  
1.1.17 Grade 19—UNS R58640. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),  
1.1.18 Grade 20—UNS R58645. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 % to 0.08 % palladium,  
1.1.19 Grade 21—UNS R58210. Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),  
1.1.20 Grade 23—UNS R56407. Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI),  
1.1.21 Grade 24—UNS R56405. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium,  
1.1.22 Grade 25—UNS R56403. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 % palladium,  
1.1.23 Grade 26—UNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.23.1 Grade 26H—UNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi (400 MPa) minimum UTS),  
1.1.24 Grade 27—UNS R52254. Unalloyed titanium plus 0.08 to 0.14 % ruthenium,  
1.1.25 Grade 28—UNS R56323. Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,  
1.1.26 Grade 29—UNS R56404. Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI) plus 0.08 to 0.14 % ruthenium,  
1.1.27 Grade 30—UNS R5...

General Information

Status
Historical
Publication Date
31-Dec-2019
Current Stage
Ref Project

Relations

Buy Standard

Technical specification
ASTM B265-20 - Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview
Technical specification
REDLINE ASTM B265-20 - Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:B265 −20
Standard Specification for
1
Titanium and Titanium Alloy Strip, Sheet, and Plate
This standard is issued under the fixed designation B265; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope 1.1.15 Grade 17—UNS R52252. Unalloyed titanium plus
2 0.04 to 0.08 % palladium,
1.1 This specification covers annealed titanium and tita-
1.1.16 Grade 18—UNS R56322. Titanium alloy (3 %
nium alloy strip, sheet, and plate as follows:
aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium,
1.1.1 Grade 1—UNS R50250. Unalloyed titanium,
1.1.17 Grade 19—UNS R58640. Titanium alloy (3 %
1.1.2 Grade 2—UNS R50400. Unalloyed titanium,
aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 %
1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium
molybdenum),
(Grade 2 with 58 ksi (400 MPa) minimum UTS),
1.1.18 Grade 20—UNS R58645. Titanium alloy (3 %
1.1.3 Grade 3—UNS R50550. Unalloyed titanium,
aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 %
1.1.4 Grade 4—UNS R50700. Unalloyed titanium,
molybdenum) plus 0.04 % to 0.08 % palladium,
1.1.5 Grade 5—UNS R56400. Titanium alloy (6 %
1.1.19 Grade 21—UNS R58210. Titanium alloy (15 %
aluminum, 4 % vanadium),
molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),
1.1.6 Grade 6—UNS R54520. Titanium alloy (5 %
1.1.20 Grade 23—UNS R56407. Titanium alloy (6 %
aluminum, 2.5 % tin),
1.1.7 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 aluminum, 4 % vanadium with extra low interstitial elements,
ELI),
to 0.25 % palladium,
1.1.7.1 Grade 7H—UNS R52400. Unalloyed titanium plus 1.1.21 Grade 24—UNS R56405. Titanium alloy (6 %
0.12 to 0.25 % palladium (Grade 7 with 58 ksi (400 MPa) aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium,
minimum UTS),
1.1.22 Grade 25—UNS R56403. Titanium alloy (6 %
1.1.8 Grade 9—UNS R56320. Titanium alloy (3.0 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and
aluminum, 2.5 % vanadium),
0.04 % to 0.08 % palladium,
1.1.9 Grade 11—UNS R52250. Unalloyed titanium plus
1.1.23 Grade 26—UNS R52404. Unalloyed titanium plus
0.12 to 0.25 % palladium,
0.08 to 0.14 % ruthenium,
1.1.10 Grade 12—UNS R53400. Titanium alloy (0.3 %
1.1.23.1 Grade 26H—UNS R52404. Unalloyed titanium
molybdenum, 0.8 % nickel),
plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi (400
1.1.11 Grade 13—UNS R53413. Titanium alloy (0.5 %
MPa) minimum UTS),
nickel, 0.05 % ruthenium),
1.1.24 Grade 27—UNS R52254. Unalloyed titanium plus
1.1.12 Grade 14—UNS R53414. Titanium alloy (0.5 %
0.08 to 0.14 % ruthenium,
nickel, 0.05 % ruthenium),
1.1.25 Grade 28—UNS R56323. Titanium alloy (3 %
1.1.13 Grade 15—UNS R53415. Titanium alloy (0.5 %
aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,
nickel, 0.05 % ruthenium),
1.1.26 Grade 29—UNS R56404. Titanium alloy (6 %
1.1.14 Grade 16—UNS R52402. Unalloyed titanium plus
aluminum, 4 % vanadium with extra low interstitial elements,
0.04 to 0.08 % palladium,
ELI) plus 0.08 to 0.14 % ruthenium,
1.1.14.1 Grade 16H—UNS R52402. Unalloyed titanium
1.1.27 Grade 30—UNS R53530. Titanium alloy (0.3 %
plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi (400
cobalt, 0.05 % palladium),
MPa) minimum UTS),
1.1.28 Grade 31—UNS R53532. Titanium alloy (0.3 %
cobalt, 0.05 % palladium),
1
This specification is under the jurisdiction of ASTM Committee B10 on
1.1.29 Grade 32—UNS R55111. Titanium alloy (5 %
Reactive and Refractory Metals and Alloys and is the direct responsibility of
aluminum, 1 % tin, 1 % zirconium, 1 % vanadium, 0.8 %
Subcommittee B10.01 on Titanium.
Current edition approved Jan. 1, 2020. Published January 2020. Originally
molybdenum),
approved in 1952. Last previous edition approved in 2015 as B265 – 15. DOI:
1.1.30 Grade 33—UNS R53442. Titanium alloy (0.4 %
10.1520/B0265-20.
2 nickel, 0.015 % palladium, 0.02 5 % ruthenium, 0.15 %
For ASME Boiler and Pressure Vessel Code applications see related Specifi-
cations SB-265 in Section II of that Code. chromium),
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
B265−20
1.1.31 Grade 34—UNS R53445. Titanium alloy (0.4 % E1409 Test Method for Determination of Oxygen and Nitro-
nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % gen in Titanium and Titanium Alloys by Inert Gas Fusion
chromium), E1447 Test Method for Determination of Hydrogen in Tita-
1.1.32 Grade 35—UNS R56340. Titanium alloy (4.5 % nium and Titanium Alloys by Inert Gas Fusion Thermal
aluminum, 2 % molybdenum, 1.6
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: B265 − 15 B265 − 20
Standard Specification for
1
Titanium and Titanium Alloy Strip, Sheet, and Plate
This standard is issued under the fixed designation B265; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope*Scope
2
1.1 This specification covers annealed titanium and titanium alloy strip, sheet, and plate as follows:
1.1.1 Grade 1—UNS R50250. Unalloyed titanium,
1.1.2 Grade 2—UNS R50400. Unalloyed titanium,
1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS),
1.1.3 Grade 3—UNS R50550. Unalloyed titanium,
1.1.4 Grade 4—UNS R50700. Unalloyed titanium,
1.1.5 Grade 5—UNS R56400. Titanium alloy (6 % aluminum, 4 % vanadium),
1.1.6 Grade 6—UNS R54520. Titanium alloy (5 % aluminum, 2.5 % tin),
1.1.7 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.7.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi (400 MPa) minimum
UTS),
1.1.8 Grade 9—UNS R56320. Titanium alloy (3.0 % aluminum, 2.5 % vanadium),
1.1.9 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.10 Grade 12—UNS R53400. Titanium alloy (0.3 % molybdenum, 0.8 % nickel),
1.1.11 Grade 13—UNS R53413. Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.12 Grade 14—UNS R53414. Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.13 Grade 15—UNS R53415. Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.14 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.14.1 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi (400 MPa)
minimum UTS),
1.1.15 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.16 Grade 18—UNS R56322. Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium,
1.1.17 Grade 19—UNS R58640. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 %
molybdenum),
1.1.18 Grade 20—UNS R58645. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 %
molybdenum) plus 0.04 % to 0.08 % palladium,
1.1.19 Grade 21—UNS R58210. Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),
1.1.20 Grade 23—UNS R56407. Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI),
1.1.21 Grade 24—UNS R56405. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium,
1.1.22 Grade 25—UNS R56403. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to
0.08 % palladium,
1.1.23 Grade 26—UNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.23.1 Grade 26H—UNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi (400 MPa)
minimum UTS),
1.1.24 Grade 27—UNS R52254. Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.25 Grade 28—UNS R56323. Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,
1
This specification is under the jurisdiction of ASTM Committee B10 on Reactive and Refractory Metals and Alloys and is the direct responsibility of Subcommittee
B10.01 on Titanium.
Current edition approved Nov. 1, 2015Jan. 1, 2020. Published December 2015January 2020. Originally approved in 1952. Last previous edition approved in 20132015
ɛ1
as B265 – 13aB265 – 15. . DOI: 10.1520/B0265-15.10.1520/B0265-20.
2
For ASME Boiler and Pressure Vessel Code applications see related Specifications SB-265 in Section II of that Code.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
B265 − 20
1.1.26 Grade 29—UNS R56404. Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI) plus
0.08 to 0.14 % ruthenium,
1.1.27 Grade 30—UNS R53530. Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.28 Grade 31—UNS R53532. Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.29 Grade 32—UNS R55111. Titanium alloy (5 % aluminum, 1 % tin, 1 % zirconium, 1 % vanadium, 0.8 % molybdenum),
1.1.30 Grade 33—UNS R53442. Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.02 5 % ruthenium, 0.15 % chromi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.