ASTM E2214-16
(Practice)Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
SIGNIFICANCE AND USE
5.1 In today's commerce, instrument makers and instrument users must deal with a large array of bench-top and portable color-measuring instruments, many with different geometric and spectral characteristics. At the same time, manufacturers of colored goods are adopting quality management systems that require periodic verification of the performance of the instruments that are critical to the quality of the final product. The technology involved in optics and electro-optics has progressed greatly over the last decade. The result has been a generation of instruments that are both more affordable and higher in performance. What had been a tool for the research laboratory is now available to the retail point of sale, to manufacturing, to design and to corporate communications. New documentary standards have been published that encourage the use of colorimeters, spectrocolorimeters, and colorimetric spetrometers in applications previously dominated by visual expertise or by filter densitometers.7 Therefore, it is necessary to determine if an instrument is suitable to the application and to verify that an instrument or instruments are working within the required operating parameters.
5.2 This practice provides descriptions of some common instrumental parameters that relate to the way an instrument will contribute to the quality and consistency of the production of colored goods. It also describes some of the material standards required to assess the performance of a color-measuring instrument and suggests some tests and test reports to aid in verifying the performance of the instrument relative to its intended application.
SCOPE
1.1 This practice provides standard terms and procedures for describing and characterizing the performance of spectral and filter based instruments designed to measure and compute the colorimetric properties of materials and objects. It does not set the specifications but rather gives the format and process by which specifications can be determined, communicated and verified.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E2214 − 16
Standard Practice for
Specifying and Verifying the Performance of Color-
1
Measuring Instruments
This standard is issued under the fixed designation E2214; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
Recent advances in optics, electronics and documentary standard have resulted in a proliferation of
instruments for the measurement of color and appearance of materials and objects.These instruments
possessverygoodperformancebuttherehasbeenlittleprogresstowardstandardizingtheterminology
and procedures to quantify that performance. Therefore, the commercial literature and even some
documentary standards are a mass of confusing terms, numbers and specifications that are impossible
to compare or interpret.
Two recent papers in the literature, have proposed terms and procedures to standardize the
specification, comparison and verification of the level of performance of a color-measuring
2,3
instrument. Followingthoseprocedures,thosespecificationscanbecomparedtoproducttolerances.
Thisbecomesimportantsothatinstrumentusersandinstrumentmakerscanagreeonhowtocompare
or verify, or both, that their instruments are performing in the field as they were designed and tested
in the factory.
1. Scope 2. Referenced Documents
4
1.1 This practice provides standard terms and procedures 2.1 ASTM Standards:
for describing and characterizing the performance of spectral D2244Practice for Calculation of Color Tolerances and
and filter based instruments designed to measure and compute Color Differences from Instrumentally Measured Color
the colorimetric properties of materials and objects. It does not Coordinates
setthespecificationsbutrathergivestheformatandprocessby E284Terminology of Appearance
which specifications can be determined, communicated and E1164PracticeforObtainingSpectrometricDataforObject-
verified. Color Evaluation
2.2 Other Documents:
1.2 This standard does not purport to address all of the
ISO VIM International Vocabulary of Basic and General
safety concerns, if any, associated with its use. It is the
5
Terms in Metrology (VIM)
responsibility of the user of this standard to establish appro-
NIST Technical Note 1297Guidelines for Evaluating and
priate safety and health practices and determine the applica-
Expressing the Uncertainty of NIST Measurement Re-
bility of regulatory limitations prior to use.
6
sults
1
This practice is under the jurisdiction ofASTM Committee E12 on Color and
4
Appearance and is the direct responsibility of Subcommittee E12.04 on Color and For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Appearance Analysis. contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Current edition approved Nov. 1, 2016. Published November 2016. Originally Standards volume information, refer to the standard’s Document Summary page on
ε1
approved in 2002. Last previous edition approved in 2012 as E2214–12 . DOI: the ASTM website.
5
10.1520/E2214-16. ISO/IDE/OIML/BIPM, International Vocabulary of Basic and General Terms
2
Ladson, J., “Colorimetric Data Comparison of Bench-Top and Portable in Metrology, International Organization for Standardization, Geneva, Switzerland,
Instruments,” AIC Interim Meeting, Colorimetry, Berlin, 1995. 1984.
3 6
Rich, D., “Standardized Terminology and Procedures for Specifying and Taylor, Barry N., and Kuyatt, Chris E., Guidelines for Evaluating and
Verifying the Performance of Spectrocolorimeters,” AIC Color 97 Kyoto, Kyoto, Expressing the Uncertainty of NIST Measurement Results, NIST Technical Note
1997. 1297, U. S. Government Printing Office, Washington, D. C., 1984.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
E2214 − 16
3. Terminology colored goods are adopting quality management systems that
require periodic verification of the performance of the instru-
3.1 Definitions of appearance terms in Terminology E284
ments that are critical to the quality of the final product. The
are applicable to this practice.
technologyinvolvedinopticsandelectro-opticshasprogressed
3.2 Definitions of metrology terms in ISO, International
greatlyoverthelastdecade.Theresulthasbeenagenerationof
Vocabulary of Basic and General Terms in Metrology (VIM)
instruments that are both more affordable and higher in
are applicable to this practice.
performance. What had been a tool for the research laboratory
3.3 Definitions of Terms Specific to This Standard: isnowavailabletotheretailpointofsale,tomanufacturing,to
d
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
´1
Designation: E2214 − 12 E2214 − 16
Standard Practice for
Specifying and Verifying the Performance of Color-
1
Measuring Instruments
This standard is issued under the fixed designation E2214; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1
ε NOTE—Reference to Fig. 1 and Fig. 2 and corrections in the table in A1.3.1 were made editorially in September 2013.
INTRODUCTION
Recent advances in optics, electronics and documentary standard have resulted in a proliferation of
instruments for the measurement of color and appearance of materials and objects. These instruments
possess very good performance but there has been little progress toward standardizing the terminology
and procedures to quantify that performance. Therefore, the commercial literature and even some
documentary standards are a mass of confusing terms, numbers and specifications that are impossible
to compare or interpret.
Two recent papers in the literature, have proposed terms and procedures to standardize the
specification, comparison and verification of the level of performance of a color-measuring
2,3
instrument. Following those procedures, those specifications can be compared to product tolerances.
This becomes important so that instrument users and instrument makers can agree on how to compare
or verify, or both, that their instruments are performing in the field as they were designed and tested
in the factory.
1. Scope
1.1 This practice provides standard terms and procedures for describing and characterizing the performance of spectral and filter
based instruments designed to measure and compute the colorimetric properties of materials and objects. It does not set the
specifications but rather gives the format and process by which specifications can be determined, communicated and verified.
1.2 This practice does not describe methods that are generally applicable to visible-range spectroscopic instruments used for
analytical chemistry (UV-VIS spectrophotometers). ASTM Committee E13 on Molecular Spectroscopy and Chromatography
includes such procedures in standards under their jurisdiction.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Referenced Documents
4
2.1 ASTM Standards:
D2244 Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
E284 Terminology of Appearance
E1164 Practice for Obtaining Spectrometric Data for Object-Color Evaluation
1
This practice is under the jurisdiction of ASTM Committee E12 on Color and Appearance and is the direct responsibility of Subcommittee E12.04 on Color and
Appearance Analysis.
Current edition approved July 1, 2012Nov. 1, 2016. Published August 2012November 2016. Originally approved in 2002. Last previous edition approved in 20082012
ε1
as E2214 – 08E2214 – 12 . DOI: 10.1520/E2214-12E01.10.1520/E2214-16.
2
Ladson, J., “Colorimetric Data Comparison of Bench-Top and Portable Instruments,” AIC Interim Meeting, Colorimetry, Berlin, 1995.
3
Rich, D., “Standardized Terminology and Procedures for Specifying and Verifying the Performance of Spectrocolorimeters,” AIC Color 97 Kyoto, Kyoto, 1997.
4
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
E2214 − 16
2.2 Other Documents:
5
ISO VIM International Vocabulary of Basic and General Terms in Metrology (VIM)
5
ISO/IDE/OIML/BIPM, International Vocabulary of Basic and General Terms in Metrology, International Organization for Standardization, Geneva, Switzerland, 1984.
2
---------------------- Page: 2 ----------------------
E2214 − 16
6
NIST Technical Note 1297 Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results
3. Terminology
3.1 Definitions of appearance terms in Terminology E284 are applicab
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.