Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media

SIGNIFICANCE AND USE
This terminology contains terms used in the description and procedure of analysis of the size of particulate materials through sieve analysis with standard testing sieves and is applicable to the work of many ASTM technical committees. For a composite listing of published ASTM standards using standard testing sieves, refer to ASTM STP 447B.  
While some of the terms appearing in this terminology may also be used in the description, procedure, and end products of production screening (either on a batch-fed or continuous basis), it is the intent of this terminology to present the definitions and usage of terms strictly in the context of sieve analysis using standard testing sieves.
SCOPE
1.1 This terminology includes all those terms used in all of the standards under the jurisdiction of Subcommittee E29.01. Terms are defined that are related to the manufacture of standard test sieves and screening media, as well as terms related to the methods, analysis, procedures, and equipment for sizing and separating particles.  
1.2 Committee E29 on Particle and Spray Characterization feels that it is essential to include terms and definitions explicit to the scope, regardless of whether the terms appear in existing ASTM standards. Terms that are in common usage and appear in common-language dictionaries are generally not included.

General Information

Status
Historical
Publication Date
14-Nov-2011
Current Stage
Ref Project

Relations

Buy Standard

Standard
ASTM E1638-11a - Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
REDLINE ASTM E1638-11a - Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E1638 – 11a
Standard Terminology
1
Relating to Sieves, Sieving Methods, and Screening Media
This standard is issued under the fixed designation E1638; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
Particle size analysis through the use of standard test sieves, and particle separation through the use
of screening media, are commonly adopted methods of achieving desired process specifications
related to particles. To ensure a better understanding of sizing and separation systems and processes
and to ensure appropriate comparison of data, terminology common to the processes must be
documented and defined.
For Subcommittee E29.01 on Sieves, Sieving Methods, and Screening Media, this is an ongoing
process of developing new related terms. Every effort has been made to ensure accuracy, precision,
and clarity for the terms included. Suggestions and comments for additions, corrections, and revisions
are welcomed.
1. Scope E674 Specification for Industrial Perforated Plate and
Screens (Round Opening Series)
1.1 This terminology includes all those terms used in all of
E2016 Specification for Industrial Woven Wire Cloth
the standards under the jurisdiction of Subcommittee E29.01.
E2427 Test Method forAcceptance by Performance Testing
Terms are defined that are related to the manufacture of
for Sieves
standard test sieves and screening media, as well as terms
E2589 Terminology Relating to Nonsieving Methods of
related to the methods, analysis, procedures, and equipment for
Powder Characterization
sizing and separating particles.
2
2.2 ASTM Manuals:
1.2 Committee E29 on Particle and Spray Characterization
ASTM STP 447B Manual on Testing Seiving Methods
feels that it is essential to include terms and definitions explicit
to the scope, regardless of whether the terms appear in existing
3. Significance and Use
ASTM standards. Terms that are in common usage and appear
3.1 This terminology contains terms used in the description
in common-language dictionaries are generally not included.
and procedure of analysis of the size of particulate materials
2. Referenced Documents through sieve analysis with standard testing sieves and is
2
applicable to the work of many ASTM technical committees.
2.1 ASTM Standards:
For a composite listing of published ASTM standards using
E11 SpecificationforWovenWireTestSieveClothandTest
standard testing sieves, refer to ASTM STP 447B.
Sieves
3.2 While some of the terms appearing in this terminology
E161 Specification for Precision Electroformed Sieves
may also be used in the description, procedure, and end
E454 Specification for Industrial Perforated Plate and
products of production screening (either on a batch-fed or
Screens (Square Opening Series)
continuous basis), it is the intent of this terminology to present
the definitions and usage of terms strictly in the context of
sieve analysis using standard testing sieves.
1
This terminology is under the jurisdiction ofASTM Committee E29 on Particle
and Spray Characterization and is the direct responsibility of Subcommittee E29.01
4. Terminology
on Sieves, Sieving Methods, and Screening Media.
Current edition approved Nov. 15, 2011. Published December 2011. Originally
4.1 Definitions:
approved in 1994. Last previous edition approved in 2011 as E1638 – 11. DOI:
10.1520/E1638-11A.
agglomerate, n—two or more particles adhering together.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
E1638
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
aperture, n—the opening in a screening or sieving medium.
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. E11
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
E1638 – 11a
aperture size, n—the dimension defining an opening in a die side, n—the surface of the plate that was against the die
screening or sieving medium. E11 during the punching operation. E454, E674
bar, n—the metal between perforations. E454, E674 double crimp wire cloth, n—wire cloth woven with approxi-
blank, n—an unperforated area located other than along the mately equal corrugations in both the warp and shute wires
perimeter of a plate. E454, E674 to lock the wires in position. E11, E2016
bolting grade wire cloth, n—wire cloth meeting a group of electroformed mesh, n—electrodeposited grid material con-
specifications that are typical for higher sifting capacities sisting of precision openings used as the
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:E1638–11 Designation:E1638–11a
Standard Terminology
1
Relating to Sieves, Sieving Methods, and Screening Media
This standard is issued under the fixed designation E1638; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
Particle size analysis through the use of standard test sieves, and particle separation through the use
of screening media, are commonly adopted methods of achieving desired process specifications
related to particles. To ensure a better understanding of sizing and separation systems and processes
and to ensure appropriate comparison of data, terminology common to the processes must be
documented and defined.
For Subcommittee E29.01 on Sieves, Sieving Methods, and Screening Media, this is an ongoing
process of developing new related terms. Every effort has been made to ensure accuracy, precision,
and clarity for the terms included. Suggestions and comments for additions, corrections, and revisions
are welcomed.
1. Scope
1.1 This terminology includes all those terms used in all of the standards under the jurisdiction of Subcommittee E29.01.Terms
are defined that are related to the manufacture of standard test sieves and screening media, as well as terms related to the methods,
analysis, procedures, and equipment for sizing and separating particles.
1.2 Committee E29 on Particle and Spray Characterization feels that it is essential to include terms and definitions explicit to
the scope, regardless of whether the terms appear in existing ASTM standards. Terms that are in common usage and appear in
common-language dictionaries are generally not included.
2. Referenced Documents
2
2.1 ASTM Standards:
E11 Specification for Woven Wire Test Sieve Cloth and Test Sieves
E161 Specification for Precision Electroformed Sieves
E454 Specification for Industrial Perforated Plate and Screens (Square Opening Series)
E674 Specification for Industrial Perforated Plate and Screens (Round Opening Series)
E2016 Specification for Industrial Woven Wire Cloth
E2427 Test Method for Acceptance by Performance Testing for Sieves
E2589 Terminology Relating to Nonsieving Methods of Powder Characterization
2
2.2 ASTM Manuals:
ASTM STP 447B Manual on Testing Seiving Methods
3. Significance and Use
3.1 Thisterminologycontainstermsusedinthedescriptionandprocedureofanalysisofthesizeofparticulatematerialsthrough
sieve analysis with standard testing sieves and is applicable to the work of many ASTM technical committees. For a composite
listing of published ASTM standards using standard testing sieves, refer to ASTM STP 447B.
3.2 While some of the terms appearing in this terminology may also be used in the description, procedure, and end products
of production screening (either on a batch-fed or continuous basis), it is the intent of this terminology to present the definitions
and usage of terms strictly in the context of sieve analysis using standard testing sieves.
1
This terminology is under the jurisdiction of ASTM Committee E29 on Particle and Spray Characterization and is the direct responsibility of Subcommittee E29.01 on
Sieves, Sieving Methods, and Screening Media.
Current edition approved May 1,Nov. 15, 2011. Published JuneDecember 2011. Originally approved in 1994. Last previous edition approved in 20102011 as E1638 – 101.
DOI: 10.1520/E1638-11A.
2
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
E1638–11a
4. Terminology
4.1 Definitions:
agglomerate, n—two or more particles adhering together. E1638
aperture, n—the opening in a screening or sieving medium. E11
aperture size, n—the dimension defining an opening in a screening or sieving medium. E11
bar, n—the metal between perforations. E454, E674
blank, n—an unperforated area located other than along the perimeter of a plate. E454, E674
bolting grade wire cloth, n—wire cloth meeting a group of specifications that are typical for higher sifting capacities and which
can speed the bolting action of vibratory screening ma
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.