EN 12057:2015
(Main)Natural stone products - Modular tiles - Requirements
Natural stone products - Modular tiles - Requirements
This European Standard specifies requirements for flat modular tiles of natural stone which are made for internal (including enclosed public transport premises) and/or external uses as floorings, stairs and wall and ceiling finishes. This European Standard does not cover mineral aggregates and artificial agglomerated stone material and does not cover installation.
Natursteinprodukte - Fliesen - Anforderungen
Diese Europäische Norm legt Anforderungen an ebene Fliesen aus Naturstein fest, die als Belag für Fußböden und Treppenstufen sowie als Decken- und Wandbekleidung im Innenbereich (einschließlich innenliegende Einrichtungen des öffentlichen Verkehrs) und/oder Außenbereich eingesetzt werden. Nicht erfasst werden in dieser Europäischen Norm mineralische Gesteinskörnungen und künstlich hergestelltes Gesteinsmaterial sowie die Verlegung.
Produits en pierre naturelle - Plaquettes modulaires - Exigences
La présente Norme européenne définit les exigences relatives aux plaquettes modulaires planes en pierre naturelle destinées aux usages intérieurs (y compris les lieux de transports publics fermés) et/ou extérieurs comme finitions de revêtements de sols, d’escaliers, de murs et de plafonds. La présente Norme européenne ne couvre pas les agrégats minéraux ni les matériaux rocheux agglomérés artificiellement, et ne concerne pas la mise en oeuvre.
Proizvodi iz naravnega kamna - Ploščice - Zahteve
Ta dokument določa zahteve za ploščate ploščice iz naravnega kamna, ki se uporabljajo za tlake, stopnice ter navpične in stropne obloge. Standard ne zajema mineralnih agregatov in materiala iz umetnega aglomeriranega kamna ter ne obravnava polaganja.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Natursteinprodukte - Fliesen - AnforderungenProduits en pierre naturelle - Plaquettes modulaires - ExigencesNatural stone products - Modular tiles - Requirements91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 12057:2015SIST EN 12057:2015en,de01-maj-2015SIST EN 12057:2015SLOVENSKI
STANDARDSIST EN 12057:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12057
March 2015 ICS 91.100.15 Supersedes EN 12057:2004English Version
Natural stone products - Modular tiles - Requirements
Produits en pierre naturelle - Plaquettes modulaires - Exigences
Natursteinprodukte - Fliesen - Anforderungen This European Standard was approved by CEN on 3 January 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12057:2015 ESIST EN 12057:2015
Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 28 ZA.1 Scope and relevant characteristics . 28 ZA.2 Procedure for attestation of conformity of natural stone modular tiles . 33 ZA.2.1 System(s) of attestation of conformity . 33 ZA.2.2 Declaration of performance (DoP) . 41 ZA.2.2.1 General . 41 ZA.2.2.2 Content. 42 ZA.2.2.3 Examples of DoP . 43 ZA.2.2.3.1 Example of DoP for natural stone tiles used as internal wall and ceiling finishes . 43 ZA.2.2.3.2 Example of DoP for natural stone tiles used as external wall and ceiling finishes . 45 ZA.2.2.3.3 Example of DoP for natural stone tiles used as internal flooring and stair finishes . 47 ZA.2.2.3.4 Example of DoP for natural stone tiles used as external flooring and stair finishes . 49 ZA.3 CE marking and labelling. 51 Bibliography . 56
Figure 1 — Dimensions of a modular tile 3.3 calibrated tile tile which fulfil stricter tolerances for thickness, flatness and squareness 3.4 lower expected value lower expected value (EL) corresponds to the 5 %-quantile of a logarithmic normal distribution for a confidence level of 75 % 3.5 higher expected value higher expected value (EH) corresponds to the 95 %-quantile of a logarithmic normal distribution for a confidence level of 75 % 4 Characteristics of natural stone modular tiles 4.1 Geometrical characteristics 4.1.1 General All measurements shall be carried out in accordance with EN 13373 and all measured values of individual units shall fall within the required tolerances. SIST EN 12057:2015
Key 1 reference sample 2 production sample 3 daylight Figure 2 — Comparison between production sample and reference sample 4.2.4 Flexural strength When required the flexural strength shall be determined using the test method in EN 12372 and the mean value, lower expected value and standard deviation shall be declared. Where the surface finish of the delivered product has an influence on the characteristic, the test shall be carried out with this finish, in accordance with the technological tests defined in EN 12372. 4.2.5 Bond strength/adhesion This standard does not consider fixing by means of mortar and adhesives. NOTE The value of the bond strength adhesion and the durability depend on several influences, e.g. the type of adhesive/mortar, the surfaces being bonded and the climatic conditions. SIST EN 12057:2015
1) Commission Decision 96/603/EC, as amended. SIST EN 12057:2015
2) CEN/TS 00351014 is under preparation. SIST EN 12057:2015
Other comments (e.g. warnings, if appropriate): Description of the sampling method Date and time of sampling: Reference to sampling plan used: Sampling procedure (drilling, cutting, etc.) Purpose of the sampling Samples No. and dimensions of samples: Other comments: Dispatch of the samples: Sampler(s) (print name): Contract details Contract identification: Name and address of party requesting the sampling:……………………. …………………………………………………………………………………… Name of person(s) present at sampling:……………………………………. …………………………………………………………………………………… Signatures:……………………………………………………………………… …………………………………………………………………………………… …………………………………………………………………………………… SIST EN 12057:2015
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...