CEN/TC 129/WG 2 - Toughened, heat strengthened and enamelled glass
To produce harmonised standards for thermally toughened, heat strengthened, chemically strengthened and heat soaked products.
Toughened, heat strengthened and enamelled glass
To produce harmonised standards for thermally toughened, heat strengthened, chemically strengthened and heat soaked products.
General Information
This document gives test methods to assess the shatter properties of different types of monolithic flat glass for use in building and construction works, for which a specific fragmentation pattern is required when tested under defined conditions.
NOTE Thermally treated monolithic glass is a product for which such a requirement exists.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat thermally toughened soda lime silicate safety glass for use in buildings.
Information on curved thermally toughened soda lime silicate safety glass is given in Annex A, but this product does not form part of this European Standard.
Other requirements, not specified in this European Standard, can apply to thermally toughened soda lime silicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating glass units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate glass product standard. Thermally toughened soda lime silicate safety glass, in this case, does not lose its bending strength characteristics and its resistance to temperature differentials.
Surface finished glasses (e.g. sandblasted, acid etched) after toughening are not covered by this European Standard.
- Standard38 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the heat soak process system together with tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat soaked thermally toughened soda lime silicate safety glass for use in buildings.
Curved heat soaked thermally toughened soda lime silicate safety glass is not part of this European Standard.
Other requirements, not specified in this European Standard, can apply to heat soaked thermally toughened soda lime silicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Heat soaked thermally toughened soda lime silicate safety glass, in this case, does not lose its bending strength characteristics and its resistance to temperature differentials.
Surface finished glasses (e.g. sandblasted, acid etched) after toughening are not covered by this European Standard.
- Standard45 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard covers the evaluation of conformity and the factory production control of thermally toughened soda lime silicate channel shaped safety glass for use in buildings.
This also includes requirements subject to regulation.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the heat soak process system together with tolerances flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings. Information on curved heat soak thermally toughened alkaline earth silicate safety glass is given in Annex B, but this product does not form part of this document.
Other requirements, not specified in this document, can apply to heat soaked thermally toughened alkaline earth silicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard EN 15682-2. In this case, heat soaked thermally toughened alkaline earth silicate glass does not lose its mechanical or thermal characteristics.
- Standard42 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements, the evaluation of conformity and the factory production control of flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings.
For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies tolerances, flatness of web and flanges, flange deviation, edgework, fragmentation and physical and mechanical characteristics of monolithic thermally toughened soda lime silicate channel shaped safety glass for use in buildings.
Other requirements, not specified in this document, can apply to thermally toughened soda lime silicate channel shaped safety glass, which undergoes an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard EN 15683-2. Thermally toughened soda lime silicate channel shaped safety glass, in this case, does not lose its mechanical or thermal characteristics.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat strengthened soda lime silicate glass of nominal thicknesses from 3 mm to 12 mm for use in buildings.
Information on curved heat strengthened soda lime silicate glass is given in Annex A, but this product does not form part of this standard.
Other requirements, not specified in this standard, can apply to heat strengthened soda lime silicate glass which is incorporated into assemblies, e.g. laminated glass or insulating glass units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Heat strengthened soda lime silicate glass, in this case, does not lose its mechanical or thermal characteristics.
This European Standard does not cover glass sandblasted after toughening.
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat thermally toughened borosilicate safety glass for use in buildings.
Information on curved thermally toughened borosilicate safety glass is given in Annex A, but this product does not form part of this standard.
Other requirements, not specified in this standard, can apply to thermally toughened borosilicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating glass units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Thermally toughened borosilicate safety glass, in this case, does not lose its mechanical or thermal characteristics.
This European Standard does not cover glass sandblasted after toughening.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
This document covers the evaluation of conformity and the factory production control of flat thermally toughened borosilicate safety glass for use in buildings.
Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day
This document covers the evaluation of conformity and the factory production control of flat chemically strengthened soda lime silicate glass for use in buildings.
Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
This document covers the evaluation of conformity and the factory production control of flat heat strengthened soda lime silicate glass for use in buildings.
Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
- Standard38 pagesEnglish languagesale 10% offe-Library read for1 day
This document covers the evaluation of conformity and the factory production control of flat thermally toughened soda lime silicate safety glass for use in buildings.
Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
- Standard39 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard covers the evaluation of conformity and the factory production control of flat thermally toughened alkaline earth silicate safety glass for use in buildings.
NOTE 1 This also includes requirements subject to regulation.
NOTE 2 For glass products with electrical wiring or connections for e.g. alarm or heating purposes, this European Standard covers only wiring subject for electrical potential difference to earth less than 50 V a.c. or less than 75 V d.c.
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat thermally toughened alkaline earth silicate safety glass for use in buildings.
Information on curved thermally toughened alkaline earth silicate safety glass is given in Annex A, but this product does not form part of this European Standard.
Other requirements, not specified in this European Standard, can apply to thermally toughened alkaline earth silicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Thermally toughened alkaline earth silicate safety glass, in this case, does not lose its mechanical or thermal characteristics.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard covers tolerances, flatness, edge work, fragmentation and physical and mechanical characteristics of monolithic flat chemically strengthened soda lime silicate glass for use in buildings. Bent chemically strengthened soda lime silicate glass is mentioned, but this product is not part of this standard. Chemically strenghtened soda lime silicate glass can be incorporated into assemblies, e.g. laminated glass or insulating units, or undergo an additional treatment, e.g. coating, etc and will therefore also comply with the requirements of the appropriate finished product standard.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat thermally toughened borosilicate safety glass for use in buildings.
This standard deals exclusively with thermally toughened borosilicate safety glass manufactured by the horizontal toughening process.
Other requirements, not specified in this document, can apply to thermally toughened borosilicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating glass units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Thermally toughened borosilicate safety glass, in this case, does not lose its mechanical or thermal characteristics and its resistance to temperature differentials.
Surface finished glasses (e.g. sandblasted, acid etched) after toughening are not covered by this document.
- Draft29 pagesEnglish languagesale 10% offe-Library read for1 day
This document covers the evaluation of conformity and the factory production control of thermally toughened soda lime silicate channel shaped safety glass for use in buildings.
NOTE This also includes requirements subject to regulation.
- Draft34 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 15682 specifies requirements, the evaluation of conformity and the factory production control of flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings.
NOTE For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
- Draft36 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the heat soak process system together with tolerances flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings.
Information on curved heat soak thermally toughened alkaline earth silicate safety glass is given in annex B, but this product does riot form part of this document.
Other requirements, not specified in this document, can apply to heat soaked thermally toughened alkaline earth silicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Heat soak thermally toughened alkaline earth silicate safety glass, in this case, does not lose its mechanical or thermal characteristics.
- Draft43 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies tolerances, flatness of web and flanges, flange deviation, edgework, fragmentation and physical and mechanical characteristics of monolithic thermally toughened soda lime silicate channel shaped safety glass for use in buildings.
Other requirements, not specified in this document, can apply to thermally toughened soda lime silicate channel shaped safety glass, which undergoes an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Thermally toughened soda lime silicate channel shaped safety glass, in this case, does not lose its mechanical or thermal characteristics.
- Draft18 pagesEnglish languagesale 10% offe-Library read for1 day
This document covers the assessment and verification of constancy of performances and the factory production control of flat thermally toughened borosilicate safety glass for use in buildings.
NOTE For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
- Draft36 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 15682 specifies requirements, the evaluation of conformity and the factory production control of flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings.
NOTE For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
- Draft34 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies tolerances, flatness of web and flanges, flange deviation, edgework, fragmentation and physical and mechanical characteristics of monolithic thermally toughened soda lime silicate channel shaped safety glass for use in buildings.
Other requirements, not specified in this document, can apply to thermally toughened soda lime silicate channel shaped safety glass, which undergoes an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Thermally toughened soda lime silicate channel shaped safety glass, in this case, does not lose its mechanical or thermal characteristics.
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the heat soak process system together with tolerances flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings.
Information on curved heat soak thermally toughened alkaline earth silicate safety glass is given in annex B, but this product does riot form part of this document.
Other requirements, not specified in this document, can apply to heat soaked thermally toughened alkaline earth silicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Heat soak thermally toughened alkaline earth silicate safety glass, in this case, does not lose its mechanical or thermal characteristics.
- Draft42 pagesEnglish languagesale 10% offe-Library read for1 day
This document covers the assessment and verification of constancy of performances and the factory production control of flat thermally toughened soda lime silicate safety glass for use in buildings.
NOTE For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
- Draft40 pagesEnglish languagesale 10% offe-Library read for1 day
This document covers the evaluation of conformity and the factory production control of thermally toughened soda lime silicate channel shaped safety glass for use in buildings.
NOTE This also includes requirements subject to regulation.
- Draft35 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat thermally toughened soda lime silicate safety glass for use in buildings.
Information on curved thermally toughened soda lime silicate safety glass is given in Annex A, but this product does not form part of this European Standard.
Other requirements, not specified in this European Standard, can apply to thermally toughened soda lime silicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating glass units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate glass product standard. Thermally toughened soda lime silicate safety glass, in this case, does not lose its bending strength characteristics and its resistance to temperature differentials.
Surface finished glasses (e.g. sandblasted, acid etched) after toughening are not covered by this European Standard.
- Draft4 pagesEnglish languagesale 10% offe-Library read for1 day
This document is currently submitted to the Enquiry and formal vote Procedure to amend clauses 7.1., 7.4.3., 8.3. and 10.
- Draft5 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat thermally toughened soda lime silicate safety glass for use in buildings.
Information on curved thermally toughened soda lime silicate safety glass is given in Annex A, but this product does not form part of this European Standard.
Other requirements, not specified in this European Standard, can apply to thermally toughened soda lime silicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating glass units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate glass product standard. Thermally toughened soda lime silicate safety glass, in this case, does not lose its bending strength characteristics and its resistance to temperature differentials.
Surface finished glasses (e.g. sandblasted, acid etched) after toughening are not covered by this European Standard.
- Standard37 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the heat soak process system together with tolerances flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat soaked thermally toughened soda lime silicate safety glass for use in buildings.
Information on curved heat soak thermally toughened soda lime silicate safety glass is given in Annex B, but this product does not form part of this European Standard.
Other requirements, not specified in this European Standard, can apply to heat soaked thermally toughened soda lime silicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Heat soak thermally toughened soda lime silicate safety glass, in this case, does not lose its mechanical or thermal characteristics.
- Standard43 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard covers tolerances, flatness, edge work, fragmentation and physical and mechanical characteristics of monolithic flat thermally toughened soda lime silicate safety glass for use in buildings. Bent thermally toughened soda lime silicate safety glass is mentioned, but this product is not part of this standard. Other requirements not specified in this standard may apply to thermally toughened soda lime silicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating units, or undergo an additional treatment, e.g. coating, etc. Thermally toughened soda lime silicate glass, in this case, does not lose its mechanical or thermal characteristics.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat thermally toughened borosilicate safety glass for use in buildings.
Information on curved thermally toughened borosilicate safety glass is given in annex B, but this product does not form part of this standard.
Other requirements, not specified in this standard, may apply to thermally toughened borosilicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Thermally toughened borosilicate safety glass, in this case, does not lose its mechanical or thermal characteristics.
- Standard27 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies covers flatness, edge work, fragmentation and physical and mechanical characteristics of flat heat-strenghtened glass for use in buildings. Bent heat-strenghtened glass is mentioned, but this product is not part of this standard.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day