CEN/TR 15868:2018

Survey on provisions valid in the place of use used in conjunction with the European concrete standard and developing practice

This CEN Report provides a summary of provisions valid in the place of use used with EN 206:2013. The aims of this CEN Report are to:
a) provide a picture of how EN 206:2013 is being applied in practice;
b) identify areas where EN 206 is being interpreted in different ways;
c) identify areas where CEN Member Countries have found simplification to be necessary;
d) identify where the options listed in EN 206:2013, Annex M to have provisions valid in the place of use have been taken up;
e) identify other clauses in EN 206 where CEN Member Countries have amended or added to the requirements;
f) identify areas within the scope of concrete production and supply not covered by EN 206, but covered by national provisions;
g) identify developing practice that may lead to a need for standardization in the future.
EN 206 uses the phrase ‘provisions valid in the place of use’. This survey uses the term ‘provisions valid in the place of use’ to include regulations, standards and other documents that form the basis of local practice.
As a summary of national requirements, the information in this CEN Report is incomplete and may have been subject to later revisions, particularly if the entry was based on information in CEN/TR15868: 2009. It is insufficient and not intended to provide the basis for design and specification: for this the national requirements (see Table 2) should be studied.
Table 2 identifies CEN Member Countries who did not respond to the questionnaire. The other tables in this CEN Report only include information from CEN Member Countries, or in the view of the authors, the information in CEN/TR 15868:2009 is still likely to be valid.

Überblick über Bestimmungen, die am Ort der Verwendung in Verbindung mit der Europäischen Betonnorm EN 206 gelten und über die Entwicklung in der Anwendungspraxis

Enquête sur les dispositions en vigueur sur le lieu d’utilisation employées avec la Norme européenne relative au béton et sur l’évolution des pratiques

Pregled zahtev, veljavnih v kraju uporabe v povezavi z evropskim standardom za beton EN 206 ter razvojem uporabljene prakse

To poročilo CEN vsebuje povzetek zahtev, veljavnih v kraju uporabe, v povezavi s standardom EN 206:2013. Cilji tega poročila CEN so:
a) zagotoviti sliko, kako se standard EN 206:2013 uporablja v praksi;
b) prepoznati področja, na katerih se standard EN 206 razlaga različno;
c) prepoznati področja, za katera so države članice CEN ugotovile, da je potrebna poenostavitev;
d) prepoznati, kje so bile upoštevane možnosti, navedene v dodatku M standarda EN 206:2013, z veljavnimi zahtevami v kraju uporabe;
e) prepoznati druge točke iz standarda EN 206, ki so jih države članice CEN spremenile ali dodale k zahtevam;
f) prepoznati področja, ki spadajo v proizvodnjo in dobavo betona ter niso zajeta v standardu EN 206, vendar so zajeta z nacionalnimi zahtevami;
g) prepoznati prakse v razvoju, ki jih bo mora v prihodnosti treba standardizirati.
V standardu EN 206 se uporablja izraz »zahteve, veljavne v kraju uporabe«. Ta pregled uporablja izraz »zahteve, veljavne v kraju uporabe«, ki vključuje predpise, standarde in druge dokumente, ki tvorijo osnovo za lokalne prakse.
Kot povzetek nacionalnih zahtev so informacije v poročilu CEN nepopolne in so bile morda pozneje popravljene, zlasti če vnos temelji na informacijah iz CEN/TR15868: 2009. Ta je nezadosten in ni namenjen podajanju osnove za zasnovo in specifikacije: za to je treba preučiti nacionalne zahteve (glej preglednico 2).
V preglednici 2 so opredeljene države članice CEN, ki se niso odzvale na vprašalnik. Druge preglednice v tem poročilu CEN vsebujejo samo informacije držav članic CEN ali mnenje avtorjev, zato so informacije v CEN/TR 15868:2009 najverjetneje še vedno veljavne.

General Information

• Status: Published
• Publication Date: 18-Dec-2018
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/SC 1 - Revision of ENV 206
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Dec-2018
• Due Date: 18-Sep-2019
• Completion Date: 19-Dec-2018
• Ref Project: SIST-TP CEN/TR 15868:2019 - Survey on provisions valid in the place of use used in conjunction with the European concrete standard and developing practice

Relations

• Replaces: CEN/TR 15868:2009 - Survey of national requirements used in conjunction with EN 206-1:2000
• Effective Date: 28-Feb-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 15868:2019
01-april-2019
1DGRPHãþD
SIST-TP CEN/TR 15868:2009
Pregled zahtev, veljavnih v kraju uporabe v povezavi z evropskim standardom za
beton EN 206 ter razvojem uporabljene prakse
Survey on provisions valid in the place of use used in conjunction with the European
concrete standard and developing practice
Überblick über Bestimmungen, die am Ort der Verwendung in Verbindung mit der
Europäischen Betonnorm EN 206 gelten und über die Entwicklung in der
Anwendungspraxis
Enquête sur les dispositions en vigueur sur le lieu d’utilisation employées avec la Norme
européenne relative au béton et sur l’évolution des pratiques
Ta slovenski standard je istoveten z: CEN/TR 15868:2018
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST-TP CEN/TR 15868:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 15868:2019

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 15868:2019


CEN/TR 15868
TECHNICAL REPORT

RAPPORT TECHNIQUE

December 2018
TECHNISCHER BERICHT
ICS 91.100.30 Supersedes CEN/TR 15868:2009
English Version

Survey on provisions valid in the place of use used in
conjunction with the European concrete standard and
developing practice
 Überblick über Bestimmungen, die am Ort der
Verwendung in Verbindung mit der Europäischen
Betonnorm EN 206 gelten und über die Entwicklung in
der Anwendungspraxis


This Technical Report was approved by CEN on 9 November 2018. It has been drawn up by the Technical Committee CEN/TC
104.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 15868:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 15868:2019
CEN/TR 15868:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Overview on the adoption of EN 206:2013 . 6
2.1 Location of provisions valid in the place of use . 6
2.2 Status given in provisions valid in the place of use for the informative annexes in
EN 206 . 11
2.3 Uptake of permissions to use provisions valid in the place of use . 13
2.4 Provisions valid in the place of use not mentioned in EN 206:2013, Annex M . 42
2.5 Matters covered by provisions valid in the place of use that are outside the scope of
EN 206 . 51
3 Specific technical issues . 53
3.1 Exposure classes . 53
3.1.1 Understanding of the terms used to describe the exposure classes . 54
3.1.2 Exposure classes that have been grouped together . 59
3.1.3 Examples of exposure classes . 61
3.1.4 Recommended exposure classes for selected concrete elements . 73
3.1.5 Chemical attack outside th
...