EN 10361:2015

Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method

This European Standard specifies an inductively coupled plasma optical emission spectrometric method for the determination of nickel content (mass fraction) between 5,0 % and 25,0 % in alloyed steels.
The method does not apply to alloyed steels having niobium and/or tungsten contents higher than 0,1 %.

Legierte Stähle - Bestimmung des Nickelanteils - Verfahren mittels optischer Emissionsspektrometrie mit induktiv gekoppeltem Plasma

Diese Europäische Norm legt ein Verfahren der optischen Emissionsspektrometrie mit induktiv gekoppeltem Plasma fest, das zur Bestimmung von Nickelanteilen (Massenanteilen) in legierten Stählen zwischen 5,0 % und 25,0 % angewendet wird.
Das Verfahren ist nicht auf legierte Stähle anwendbar, die Niobium  und/oder Wolframanteile von mehr als 0,1 % haben.

Aciers alliés - Détermination du nickel - Méthode par spectrométrie d'émission optique avec source à plasma induit

La présente Norme européenne spécifie une méthode de détermination des teneurs en nickel comprises entre 5,0 % et 25,0 %, dans les aciers alliés, par spectrométrie d’émission optique avec source à plasma induit.  
La méthode ne s’applique pas aux aciers alliés contenant plus de 0,1 % de niobium et/ou de tungstène.

Legirana jekla - Določevanje niklja - Optična emisijska spektrometrija z induktivno sklopljeno plazmo (ICP/OES)

V tem dokumentu je določena metoda optične emisijske spektrometrije z induktivno sklopljeno plazmo za določanje vsebnosti niklja (masni delež) med 5,0 % (m/m) in 25,0 % (m/m) v legiranih jeklih.
Metoda ne velja za legirana jekla z vsebnostjo niobija in/ali volframa, višjo od 0,1 %.

General Information

• Status: Published
• Publication Date: 08-Dec-2015
• Withdrawal Date: 29-Jun-2016
• ICS: 77.040.30 - Chemical analysis of metals
• Technical Committee: ECISS/TC 102 - Methods of chemical analysis for iron and steel
• Drafting Committee: ECISS/TC 102/WG 3 - Determination of environmentally sensitive elements in steel
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 13-Aug-2021
• Ref Project: SIST EN 10361:2016 - Alloyed steels - Determination of Nickel content - Inductively coupled plasma optical emission spectrometric method

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahl - Bestimmung des Nickelgehaltes - Optischer Emissionsspektrometrie mit induktiv gekoppeltem Plasma VerfahrenAciers alliés - Détermination du Nickel - Méthode par spectrométrie d'émission optique avec source à plasma induitAlloyed steels - Determination of Nickel content - Inductively coupled plasma optical emission spectrometric method77.080.20JeklaSteels77.040.30Kemijska analiza kovinChemical analysis of metalsICS:Ta slovenski standard je istoveten z:EN 10361:2015SIST EN 10361:2016en,fr,de01-februar-2016SIST EN 10361:2016SLOVENSKI
STANDARD



SIST EN 10361:2016



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10361
December
t r s w ICS
y yä r v rä u r English Version
Alloyed steels æ Determination of nickel content æ Inductively coupled plasma optical emission spectrometric method Aciers alliés æ Détermination du nickel æ Méthode par spectrométrie d 5émission optique avec source à plasma induit
Legierte Stähle æ Bestimmung des Nickelanteils æ Verfahren mittels optischer Emissionsspektrometrie mit induktiv gekoppeltem Plasma This European Standard was approved by CEN on
t r June
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r u x sã t r s w ESIST EN 10361:2016



EN 10361:2015 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Principle . 4 4 Reagents . 4 5 Apparatus . 5 6 Sampling . 6 7 Procedure. 6 8 Determination . 8 9 Expression of the results . 9 10 Test report . 9 Annex A (informative)
Plasma optical emission spectrometer - Suggested performance criteria to be checked . 13 Annex B (informative)
Composition of the samples used for the validation precision test. 15 Annex C (informative)
Graphical representation of the precision data . 16 Bibliography . 17
SIST EN 10361:2016



EN 10361:
...