EN 13604:2002

Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications

This European Standard specifies the composition, property requirements including electrical properties and
tolerances on dimensions and form of two copper grades Cu-OFE (CW009A) and Cu-PHCE (CW022A), for
electronic and semiconductor devices as well as for vacuum applications, in the form of wrought products, e.g. plate,
sheet, strip, seamless tube, rod, bar, wire, profiles.
The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and
the delivery conditions are also specified.
This European Standard applies to the wrought copper products as delivered to the device manufacturer, i.e. for
further fabrication.

Kupfer und Kupferlegierungen - Produkte aus hochleitfähigem Kupfer für Elektronenröhren, Halbleiterbauelemente und für die Anwendung in der Vakuumtechnik

Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften, einschließlich
elektrische Eigenschaften, Grenzabmaße und Formtoleranzen der zwei Kupfersorten Cu-OFE (CW009A) und
Cu-PHCE (CW022A) für die Anwendung in der Elektronik, als Halbleiterbauelemente und für die Vakuumtechnik fest,
und zwar als Produkte, die durch plastisches Umformen hergestellt wurden, z. B. Platten, Bleche, Bänder, nahtlose
Rohre, Stangen, Drähte und Profile.
Der Ablauf der Probenentnahme, die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen
dieser Norm und die Lieferbedingungen sind ebenfalls festgelegt.
Diese Europäische Norm gilt für Produkte aus Kupfer, die durch plastisches Umformen hergestellt wurden, so wie
sie an die Hersteller von Bauteilen geliefert werden, d. h. zur weiteren Bearbeitung.

Cuivre et alliages de cuivre - Produits en cuivre de haute conductivité pour application dans les tubes électroniques, semi-conducteurs et vide

La présente Norme européenne spécifie la composition, les caractéristiques, y compris les caractéristiques électriques et les tolérances de dimensions et de formes des deux nuances de cuivre Cu-OFE (CW009A) et Cu-PHCE (CW022A), pour les dispositifs électroniques et semi-conducteurs ainsi que pour les applications de vide, se présentant sous la forme de produits corroyés, par exemple plaque, tôle, bande, tube sans soudure, barre, fil, profilés.
Les procédures d'échantillonnage, les méthodes d'essai pour la vérification de la conformité aux exigences de la présente norme et les conditions de livraison sont également spécifiées.
La présente norme européenne s'applique aux produits en cuivre corroyé tels qu'ils sont livrés au fabricant du dispositif, à savoir pour toute fabrication ultérieure.

Baker in bakrove zlitine – Izdelki iz visoko prevodnega bakra za elektronske cevi, polprevodniške sklope in uporabo v vakuumu

General Information

• Status: Withdrawn
• Publication Date: 09-Jul-2002
• Withdrawal Date: 18-Jun-2013
• ICS: 77.150.30 - Copper products
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133/WG 4 - Extruded and drawn products, forgings and scrap
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Jun-2013
• Completion Date: 19-Jun-2013
• Ref Project: SIST EN 13604:2004 - Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications

Relations

• Replaced By: EN 13604:2013 - Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
• Effective Date: 26-Jun-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine – Izdelki iz visoko prevodnega bakra za elektronske cevi, polprevodniške sklope in uporabo v vakuumuKupfer und Kupferlegierungen - Produkte aus hochleitfähigem Kupfer für Elektronenröhren, Halbleiterbauelemente und für die Anwendung in der VakuumtechnikCuivre et alliages de cuivre - Produits en cuivre de haute conductivité pour application dans les tubes électroniques, semi-conducteurs et videCopper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications77.150.30Bakreni izdelkiCopper productsICS:Ta slovenski standard je istoveten z:EN 13604:2002SIST EN 13604:2004en01-januar-2004SIST EN 13604:2004SLOVENSKI
STANDARD



SIST EN 13604:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13604July 2002ICS 77.150.30English versionCopper and copper alloys - Products of high conductivity copperfor electronic tubes, semiconductor devices and vacuumapplicationsCuivre et alliages de cuivre - Produits en cuivre de hauteconductivité pour application dans les tubes électroniques,semi-conducteurs et videKupfer und Kupferlegierungen - Produkte aushochleitfähigem Kupfer für Elektronenröhren,Halbleiterbauelemente und für die Anwendung in derVakuumtechnikThis European Standard was approved by CEN on 14 March 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13604:2002 ESIST EN 13604:2004



EN 13604:2002 (E)ContentspagepageForeword .31Scope .42Normative references .43Terms and definitions .54Designations .54.1Material .54.2Material condition .54.3Product .55Ordering information .66Requirements .76.1Composition .76.2Mechanical properties .76.3Electrical properties .86.4Freedom from hydrogen embrittlement .86.5Scale adhesion .86.6Grain size .86.7Tolerances of dimensions and form .86.8Surface condition .97Sampling .97.1General .97.2Analysis .97.3Mechanical, electrical and other tests .98Test methods .108.1Analysis .108.2Tensile test .10
8.3Hardness test .10
8.4Bend test .10
8.5Electrical test .10
8.6Hydrogen embrittlement test .11
8.7Scale adhesion test .11
8.8Estimation of average grain size .11
8.9Retests .11
8.10Rounding of results .11
9Declaration of conformity andinspection documentation .11
9.1Declaration of conformity .11
9.2Inspection documentation .1210Marking, labelling, packaging .12Annex A
(normative)
Reference chartfor microscopic examination atmagnification 100× .15Annex B
(informative)
Characteristics ofcoppers for electrical purposes .16Bibliography .18TablesTable 1 — Composition of Cu-OFE and Cu-PHCE
..................13Table 2 — Electrical properties (at 20 °C) ...14Table B.1 — Particular characteristics ofcoppers for electrical purposes .....172SIST EN 13604:2004



EN 13604:2002 (E)ForewordThis document EN 13604:2002 has been prepared by Technical Committee CEN/TC 133 "Copper and copperalloys", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by January 2003, and conflicting national standards shall be withdrawn at the latestby January 2003.Within i
...