EN 474-5:1996

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

This standard specifies additional requirements and/or exceptions from EN 474-1:1994 'Earth-moving machinery - Safety - Part 1: General requirements'.   This standard applies to wheel and crawler excavators defined in ISO/DIS 6165:1994, and gives additional requirements for attachments and for derivated machinery.   This standard applies for compact excavators as defined in 3.2.1 and figure C.2 and walking excavators as defined in 3.2.2 and figure C.5.   This standard deals with the significant hazards pertinent to hydraulic excavators when they are used as intended and under the conditions foreseen by the manufacturer (see Annex A of this standard and Annex C of EN 474-1:1994).  Bucket wheel excavators are not covered in this standard.

Erdbaumaschinen - Sicherheit - Teil 5: Anforderungen für Hydraulikbagger

Diese Norm legt zusätzliche Anforderungen und/oder Abweichungen von EN 474-1 "Erdbaumaschinen - Sicherheit - Allgemeine Anforderungen" fest. Diese Norm gilt für Mobil- und Raupenbagger, wie sie in ISO 6165 definiert sind, und beinhaltet zusätzliche Anforderungen für Arbeitsausrüstungen und für artverwandte Maschinen. Diese Norm gilt auch für Minibagger, wie sie in 3.2.1 und Anhang C, Bild C.2 und Schreitbagger, wie sie in 3.2.2 und Anhang C, Bild C.5, definiert sind.

Engins de terrassement - Sécurité - Partie 5: Exigences applicables aux pelles hydrauliques

La présente norme prescrit des exigences complémentaires et/ou des exceptions à l'EN 474-1 "Engins de terrassement - Sécurité - Exigences générales". La présente norme s'applique aux pelles hydrauliques sur roues et sur chenilles telles que définies dans l'ISO 6165, et fournit des exigences complémentaires pour les accessoires et pour les machines dérivées. La présente norme s'applique aussi aux mini-pelles telles que définies en 3.2.1 et dans l'annexe C, figure C.2, et aux pelles à avancement au pas telles que définies en 3.2.2 et dans l'annexe C, figure C.5.

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

General Information

• Status: Withdrawn
• Publication Date: 18-Jun-1996
• Withdrawal Date: 28-Nov-2006
• ICS: 53.100 - Earth-moving machinery
• Technical Committee: CEN/TC 151 - Construction equipment and building material machines - Safety
• Drafting Committee: CEN/TC 151/WG 1 - Earth-moving machinery - Safety
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 29-Nov-2006
• Completion Date: 29-Nov-2006
• Directive: 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
• Directive: 98/37/EC - Machinery
• Mandate: M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
• Ref Project: SIST EN 474-5:2000 - Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

Relations

• Replaced By: EN 474-5:2006 - Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
• Effective Date: 22-Dec-2008
• Corrected By: EN 474-5:1996/AC:1997 - Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 474-5:2000
01-april-2000
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
Erdbaumaschinen - Sicherheit - Teil 5: Anforderungen für Hydraulikbagger
Engins de terrassement - Sécurité - Partie 5: Exigenc
...