Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO 16484-6:2014)

ISO 16484-6:2014 defines a standard method for verifying that an implementation of the BACnet protocol provides each capability claimed in its Protocol Implementation Conformance Statement (PICS) in conformance with the BACnet standard.
ISO 16484-6:2014 provides a comprehensive set of procedures for verifying the correct implementation of each capability claimed on a BACnet PICS, including support of each claimed BACnet service, either as an initiator, executor, or both, support of each claimed BACnet object-type, including both required properties and each claimed optional property,support of the BACnet network layer protocol,support of each claimed data link option, andsupport of all claimed special functionality.

Systeme der Gebäudeautomation - Teil 6: Datenübertragungsprotokoll - Konformitätsprüfung (ISO 16484-6:2014)

Systèmes d'automatisation et de gestion technique du bâtiment - Partie 6: Essais de conformité de la communication de données (ISO 16484-6:2014)

L'ISO 16484-6:2014 définit une méthode normalisée permettant de vérifier qu'une mise en ?uvre du protocole BACnet fournit l'ensemble des fonctionnalités citées dans la Déclaration de conformité d'une mise en ?uvre de protocole (PICS) correspondante, conformément à la norme BACnet.
Elle fournit une série complète de procédures permettant de vérifier la bonne mise en ?uvre de chaque fonctionnalité figurant dans la PICS BACnet, notamment :
la prise en charge de chaque service BACnet, soit comme initiateur, soit comme exécuteur ou les deux,
la prise en charge de chaque objet BACNET, y compris les deux propriétés requises et chaque propriété facultative déclarée,
la prise en charge de chaque protocole de couche réseau BACnet,
la prise en charge de chaque option de liaison de données déclarée et
la prise en charge de chaque fonctionnalité spéciale déclarée.

Avtomatizacija stavb in sistemi za regulacijo - 6. del: Preskušanje skladnosti protokolov za izmenjavo podatkov (ISO 16484-6:2014)

Standard EN ISO 16484-6 opredeljuje standardno metodo za preverjanje, da uvedba BACnet protokola nudi vse možnosti, ki so navedene v Izjavi o skladnosti izvedbe protokola (PICS) v skladu z BACnet standardom. Ta del standarda ISO 16484 zagotavlja celovit niz postopkov za nadzor nad pravilno izvedbo vseh možnosti, ki so navedene v izjavi PICS protokola BACnet, vključno s a) podporo vseh navedenih storitev BACnet kot pobudnik, izvajalec ali oboje, b) podporo vseh navedenih tipov predmetov, vključno z zahtevanimi lastnostmi in vsemi neobveznimi navedenimi lastnostmi, c) podpora protokola BACnet z omrežnim slojem, d) podpora vseh navedenih možnosti podatkovnih povezav in e) podpora vseh navedenih posebnih funkcij.

General Information

Status
Withdrawn
Publication Date
20-May-2014
Withdrawal Date
14-Apr-2020
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
15-Apr-2020

Relations

Buy Standard

Standard
EN ISO 16484-6:2014
English language
580 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16484-6:2014
01-julij-2014
1DGRPHãþD
SIST EN ISO 16484-6:2009
Avtomatizacija stavb in sistemi za regulacijo - 6. del: Preskušanje skladnosti
protokolov za izmenjavo podatkov (ISO 16484-6:2014)
Building automation and control systems (BACS) - Part 6: Data communication
conformance testing (ISO 16484-6:2014)
Systeme der Gebäudeautomation - Teil 6: Datenübertragungsprotokoll -
Konformitätsprüfung (ISO 16484-6:2014)
Systèmes d'automatisation et de gestion technique du bâtiment - Partie 6: Essais de
conformité de la communication de données (ISO 16484-6:2014)
Ta slovenski standard je istoveten z: EN ISO 16484-6:2014
ICS:
35.240.99 8SRUDEQLãNHUHãLWYH,7QD IT applications in other fields
GUXJLKSRGURþMLK
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
SIST EN ISO 16484-6:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16484-6:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 16484-6:2014

EUROPEAN STANDARD
EN ISO 16484-6

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2014
ICS 91.040.01 Supersedes EN ISO 16484-6:2009
English Version
Building automation and control systems (BACS) - Part 6: Data
communication conformance testing (ISO 16484-6:2014)
Systèmes d'automatisation et de gestion technique du Systeme der Gebäudeautomation - Teil 6:
bâtiment - Partie 6: Essais de conformité de la Datenübertragungsprotokoll - Konformitätsprüfung (ISO
communication de données (ISO 16484-6:2014) 16484-6:2014)
This European Standard was approved by CEN on 6 April 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16484-6:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16484-6:2014
EN ISO 16484-6:2014 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 16484-6:2014
EN ISO 16484-6:2014 (E)
Foreword
This document (EN ISO 16484-6:2014) has been prepared by Technical Committee ISO/TC 205 “Building
environment design” in collaboration with Technical Committee CEN/TC 247 “Building Automation, Controls
and Building Management” the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2014, and conflicting national standards shall be withdrawn
at the latest by November 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 16484-6:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16484-6:2014 has been approved by CEN as EN ISO 16484-6:2014 without any modification.


3

-------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.