Adhesives for tiles - Determination of open time

This European Standard specifies the test method for the determination of the open time of ceramic tile adhesives.
This European Standard is applicable to all ceramic tile adhesives for internal or external tile installations on walls and floors.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
NOTE   Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.

Mörtel und Klebstoffe für Fliesen und Platten - Bestimmung der offenen Zeit

Colles à carrelage - Détermination du temps ouvert

La présente Norme européenne spécifie la méthode d’essai devant être utilisée pour déterminer le temps ouvert des colles à carrelage.
Elle s’applique à toutes les colles pour carreaux céramiques destinés à la pose intérieure ou extérieure sur les murs et les sols.
La présente Norme européenne ne contient pas d’exigences de performance, ni de recommandations pour la conception et la pose des carreaux céramiques.
NOTE   Les colles pour carreaux céramiques peuvent également être utilisées pour d’autres types de carrelages (carreaux de pierres naturelles ou de pierres reconstituées etc.) lorsqu’elles sont compatibles.

Lepila za ploščice - Ugotavljanja odprtega časa

General Information

Status
Withdrawn
Publication Date
28-Aug-2007
Withdrawal Date
14-Feb-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
15-Feb-2017

Relations

Buy Standard

Standard
EN 1346:2007
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Adhesives for tiles - Determination of open timeColles a carrelage - Détermination du temps ouvertMörtel und Klebstoffe für Fliesen und Platten - Bestimmung der offenen ZeitTa slovenski standard je istoveten z:EN 1346:2007SIST EN 1346:2007en,fr91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar83.180LepilaAdhesivesICS:SIST EN 1346:1998/A1:2000SIST EN 1346:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 1346:200701-december-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1346August 2007ICS 83.180; 91.100.10Supersedes EN 1346:1996
English VersionAdhesives for tiles - Determination of open timeColles à carrelage - Détermination du temps ouvertMörtel und Klebstoffe für Fliesen und Platten - Bestimmungder offenen ZeitThis European Standard was approved by CEN on 21 January 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1346:2007: E



EN 1346:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Sampling.4 4 Test conditions.4 5 Test materials.4 5.1 General.4 5.2 Ceramic tiles.5 5.3 Concrete slab.5 6 Apparatus.5 6.1 Notched trowel.5 6.2 Weight.5 6.3 Pull-head plates.5 6.4 Test machine.5 7 Mixing of adhesive.5 8 Procedure.6 9 Evaluation and expression of results.6 10 Te
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.