EN ISO 20957-9:2016
(Main)Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016)
Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016)
ISO 20957-9:2016 specifies additional safety requirements for elliptical trainers in addition to the general safety requirements of ISO 20957‑1.
ISO 20957-9:2016 specifies safety requirements for cardiovascular equipment with a closed pattern motion and/or a reciprocating motion, where the user's feet are designed to be in contact with the footplatform, but not including steppers, performed from either a standing or seated position.
Stationäre Trainingsgeräte - Ellipsen-Trainer, zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren (ISO 20957-9:2016)
Dieser Teil von ISO 20957 legt zusätzliche sicherheitstechnische Anforderungen an Ellipsen-Trainer zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach ISO 20957 1 fest.
Dieser Teil von ISO 20957 legt sicherheitstechnischen Anforderungen an kardiovaskuläre Geräte mit vorgegebenen Bewegungsabläufen und/oder Pendelbewegungen fest, die für den Kontakt der Füße des Anwenders mit einer Trittfläche ausgelegt sind, unter Ausnahme von Steppern, und die in sitzender oder stehender Position betrieben werden.
Équipement d'entraînement fixe - Partie 9: Appareils d'entraînement elliptiques, exigences spécifiques de sécurité et méthodes d'essai supplémentaires (ISO 20957-9:2016)
ISO 20957-9:2016 spécifie des exigences de sécurité supplémentaires applicables aux appareils d'entraînement elliptiques, qui complètent les exigences de sécurité générales définies dans l'ISO 20957‑1.
ISO 20957-9:2016 spécifie des exigences de sécurité applicables aux appareils cardiovasculaires, à l'exclusion des monte-escaliers, qui permettent de réaliser un mouvement décrivant une boucle fermée et/ou un mouvement alternatif pour lequel les pieds de l'utilisateur sont destinés à être en contact avec le repose-pied et que l'utilisateur effectue en position assise ou debout.
Nepremična oprema za vadbo - 9. del: Pedalniki, dodatne posebne varnostne zahteve in preskusne metode (ISO 20957-9:2016)
Ta del standarda prEN 957 določa varnostne zahteve za pedalnike, imenovane tudi trenažerji, in se uporablja poleg splošnih varnostnih zahtev standarda EN 957-1, pri čemer naj bi se ga bralo skupaj z njim.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2017
1DGRPHãþD
SIST EN 957-9:2003
1HSUHPLþQDRSUHPD]DYDGERGHO3HGDOQLNLGRGDWQHSRVHEQHYDUQRVWQH
]DKWHYHLQSUHVNXVQHPHWRGH,62
Stationary training equipment - Part 9: Elliptical trainers, additional specific safety
requirements and test methods (ISO 20957-9:2016)
Stationäre Trainingsgeräte - Teil 9: Ellipsen-Trainer, zusätzliche besondere
sicherheitstechnische Anforderungen und Prüfverfahren (ISO 20957-9:2016)
Équipement d'entraînement fixe - Partie 9: Appareils d'entraînement elliptiques,
exigences spécifiques de sécurité et méthodes d'essai supplémentaires (ISO 20957-
9:2016)
Ta slovenski standard je istoveten z: EN ISO 20957-9:2016
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 20957-9
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2016
EUROPÄISCHE NORM
ICS 97.220.30 Supersedes EN 957-9:2003
English Version
Stationary training equipment - Part 9: Elliptical trainers,
additional specific safety requirements and test methods
(ISO 20957-9:2016)
Équipement d'entraînement fixe - Partie 9: Appareils Stationäre Trainingsgeräte - Teil 9: Ellipsen-Trainer,
d'entraînement elliptiques, exigences spécifiques de zusätzliche besondere sicherheitstechnische
sécurité et méthodes d'essai supplémentaires (ISO Anforderungen und Prüfverfahren (ISO 20957-9:2016)
20957-9:2016)
This European Standard was approved by CEN on 14 August 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20957-9:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 20957-9:2016) has been prepared by Technical Committee ISO/TC 83 “Sports
and other recreational facilities and equipment” in collaboration with Technical Committee
CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2017, and conflicting national standards shall be
withdrawn at the latest by May 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 957-9:2003.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 20957-9:2016 has been approved by CEN as EN ISO 20957-9:2016 without any
modification.
INTERNATIONAL ISO
STANDARD 20957-9
Second edition
2016-10-15
Stationary training equipment —
Part 9:
Elliptical trainers, additional specific
safety requirements and test methods
Équipement d’entraînement fixe —
Partie 9: Appareils d’entraînement elliptiques, exigences spécifiques
de sécurité et méthodes d’essai supplémentaires
Reference number
ISO 20957-9:2016(E)
©
ISO 2016
ISO 20957-9:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
ISO 20957-9:2016(E)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Safety requirements . 4
5.1 General . 4
5.2 Squeeze and shear points of external construction within the accessible area . 4
5.3 Temperature rise of external construction . 4
5.4 Handlebars . 4
5.4.1 Movable handlebars . 4
5.4.2 Non-movable handlebars . 4
5.4.3 Seat handlebars. 4
5.5 Footplatforms . 5
5.5.1 Non-slip surface . 5
5.5.2 Guard . 5
5.6 Stability . 5
5.7 Endurance . 5
5.8 Seat system . 5
5.9 Additional requirements for class A . 5
5.10 Additional requirements for class B . 6
5.11 Additional requirements for class C . 6
5.12 Additional instructions for use . 6
5.13 Additional warnings . 6
6 Test methods . 6
6.1 General . 6
6.1.1 Dimensional check . 6
6.1.2 Visual examination . 6
6.1.3 Performance test . 6
6.2 Testing of squeeze and shear points . 7
6.3 Testing of temperature rise . 7
6.4 Testing of intrinsic loading . 8
6.5 Testing of handlebars . 8
6.5.1 Movable handlebars . 8
6.5.2 Non-movable handlebars . 9
6.5.3 Seat handlebars. 9
6.6 Testing of stability . 9
6.7 Endurance testing. 9
6.7.1 Speed-independent elliptical trainers . 9
6.7.2 Speed-dependent elliptical trainers . 9
6.8 Testing of seat system . 9
6.9 Testing of additional requirements for class A .10
6.9.1 General.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.