EN 4416:2006
(Main)Aerospace series - Non-metallic materials - Textiles - Wide woven fabrics - Technical specification
Aerospace series - Non-metallic materials - Textiles - Wide woven fabrics - Technical specification
This standard defines the requirements for manufacture, inspection and testing of wide woven fabrics for aerospace applications.
Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Textilien - Breitgewebe - Technische Lieferbedingungen
Diese Norm legt die Anforderungen an die Herstellung, Abnahme und Prüfung von Breitgeweben für Anwen¬dungen in der Luft und Raumfahrt fest.
Série aérospatiale - Matériaux non-métalliques - Textiles - Tissus larges - Spécification technique
Aeronavtika - Nekovinski materiali - Tekstilije - Široko tkani materiali - Tehnična specifikacija
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSHFLILNDFLMDLuft- und Raumfahrt - Nichtmetallische Werkstoffe - Textilien - Breitgewebe - Technische LieferbedingungenSérie aérospatiale - Matériaux non-métalliques - Textiles - Tissus larges - Spécification techniqueAerospace series - Non-metallic materials - Textiles - Wide woven fabrics - Technical specification49.025.60TekstilijeTextilesICS:Ta slovenski standard je istoveten z:EN 4416:2006SIST EN 4416:2009en,de01-julij-2009SIST EN 4416:2009SLOVENSKI
STANDARD
SIST EN 4416:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4416August 2006ICS 49.025.60 English VersionAerospace series - Non-metallic materials - Textiles - Widewoven fabrics - Technical specificationSérie aérospatiale - Matériaux non-métalliques - Textiles -Tissus larges - Spécification techniqueLuft- und Raumfahrt - Nichtmetallische Werkstoffe -Textilien - Gewebe - Technische LieferbedingungenThis European Standard was approved by CEN on 24 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4416:2006: ESIST EN 4416:2009
EN 4416:2006 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Requirements.7 5 Qualification.10 6 Release testing.11 7 Preparation for delivery.13 8 Declaration of conformity.14 Annex A (normative)
Table of testing requirements.15 Annex B (normative)
Defects, methods of marking and acceptance limits.16 Annex C (normative)
Marking media for textiles.19 Annex D (informative)
Dyed textiles.21
SIST EN 4416:2009
EN 4416:2006 (E) 3 Foreword This European Standard (EN 4416:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.