EN ISO 10139-2:2009

Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2009)

ISO 10139-2:2009 specifies requirements for softness, adhesion, water sorption and water solubility as well as for packaging, marking and manufacturer's instructions for soft denture lining materials suitable for long-term use. These materials may also be used for maxillofacial prostheses.

Zahnheilkunde - Weichbleibende Unterfütterungswerkstoffe für Prothesen - Teil 2: Werkstoffe für Langzeitanwendungen (ISO 10139-2:2009)

Dieser Teil von ISO 10139 enthält Anforderungen an die Weichheit, Haftfestigkeit, Wasseraufnahme und Wasserlöslichkeit ebenso wie an die Verpackung, Kennzeichnung und Gebrauchsanweisung für weich-bleibende Unterfütterungswerkstoffe für Prothesen, die für Langzeitanwendungen geeignet sind. Diese Werkstoffe können auch für maxillofaziale Prothesen verwendet werden.

Art dentaire - Produits souples pour intrados de prothèses dentaires amovibles - Partie 2: Produits pour usage à long terme (ISO 10139-2:2009)

L'ISO 10139-2:2009 spécifie les exigences afférentes à la souplesse, à l'adhésion, à la sorption d'eau et à la solubilité dans l'eau des produits souples pour intrados de prothèses dentaires adaptés à un usage à long terme. Elle traite également des exigences relatives à leur conditionnement, à leur marquage et à leur mode d'emploi. Ces produits peuvent également être utilisés pour les prothèses maxillo-faciales.

Zobozdravstvo - Mehki materiali za prevleko snemnih zobnih protez - 2. del: Materiali za dolgoročno uporabo (ISO 10139-2:2009)

General Information

• Status: Withdrawn
• Publication Date: 31-Jul-2009
• Withdrawal Date: 19-Jul-2016
• ICS: 11.060.10 - Dental materials
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Jul-2016
• Ref Project: SIST EN ISO 10139-2:2009 - Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2009)

Relations

• Replaces: EN ISO 10139-2:2001 - Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:1999)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 10139-2:2016 - Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2016)
• Effective Date: 02-Dec-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zahnheilkunde - Weiche Unterfütterungswerkstoffe für Prothesen - Teil 2: Werkstoffe für Langzeitanwendungen (ISO 10139-2:2009)Art dentaire - Produits souples pour intrados de prothèses dentaires amovibles - Partie 2: Produits pour utilisation de longue durée (ISO 10139-2:2009)Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2009)11.060.10Dental materialsICS:Ta slovenski standard je istoveten z:EN ISO 10139-2:2009SIST EN ISO 10139-2:2009en01-oktober-2009SIST EN ISO 10139-2:2009SLOVENSKI
STANDARDSIST EN ISO 10139-2:20021DGRPHãþD



SIST EN ISO 10139-2:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 10139-2August 2009ICS 11.060.10Supersedes EN ISO 10139-2:2001
English VersionDentistry - Soft lining materials for removable dentures - Part 2:Materials for long-term use (ISO 10139-2:2009)Art dentaire - Produits souples pour intrados de prothèsesdentaires amovibles - Partie 2: Produits pour usage à longterme (ISO 10139-2:2009)Zahnheilkunde - Weichbleibende Unterfütterungswerkstoffefür Prothesen - Teil 2: Werkstoffe für dieLangzeitanwendung (ISO 10139-2:2009)This European Standard was approved by CEN on 31 July 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 10139-2:2009: ESIST EN ISO 10139-2:2009



EN ISO 10139-2:2009 (E) 2 Contents Page Foreword .3 SIST EN ISO 10139-2:2009



EN ISO 10139-2:2009 (E) 3 Foreword This document (EN ISO 10139-2:2009) has been prepared by Technical Committee ISO/TC 106 "Dentistry" in collaboration with by Technical Committee CEN/TC 55 “Dentistry”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2010, and conflicting national standards shall be withdrawn at the latest by February 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10139-2:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10139-2:2009 has been approved by CEN as a EN ISO 10139-2:2009 without any modification.
SIST EN ISO 10139-2:2009



SIST EN ISO 10139-2:2009



Reference numberISO 10139-2:2009(E)© ISO 2009
INTERNATIONAL STANDARD ISO10139-2Second edition2009-08-01Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long-term use Art dentaire — Produits souples pour intrados de prothèses dentaires amovibles —
Partie 2: Produits pour usage à long terme
SIST EN ISO 10139-2:2009



ISO 10139-2:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy.
...