EN ISO 10765:2010

Footwear - Test method for the characterization of elastic materials - Tensile performance (ISO 10765:2010)

ISO 10765:2010 specifies a test method for the determination of some typical parameters of elastics for footwear using the strength/elongation graph, which is obtained from the tensile strength test. This method is applicable to any elastic material used for footwear.

Schuhe - Prüfverfahren zur Charakterisierung elastischer Materialien - Gebrauchsverhalten unter Zugbeanspruchung (ISO 10765:2010)

Diese Internationale Norm legt ein Prüfverfahren zur Bestimmung einiger typischer Parameter von elastischen
Materialien für Schuhe unter Anwendung der Kraft-Dehnungs-Kurve fest, die aus der Zugfestigkeitsprüfung
erhalten wurde. Dieses Verfahren gilt für sämtliche Arten von elastischen Materialien, die in Schuhen
verwendet werden.

Chaussures - Méthode d'essai de caractérisation des matériaux élastiques - Performances de traction (ISO 10765:2010)

L'ISO 10765:2010 spécifie une méthode d'essai pour la détermination de certains paramètres types des élastiques pour chaussures, à l'aide d'une courbe de force/allongement, obtenue à partir d'un essai de résistance à la traction. Cette méthode est applicable à tout matériau élastique utilisé pour des chaussures.

Obutev - Preskusna metoda za karakterizacijo elastičnih materialov - Lastnosti pri natezni obremenitvi (ISO 10765:2010)

Ta mednarodni standard opredeljuje preskusno metodo za ugotavljanje nekaterih tipičnih parametrov elastičnih materialov za obutev, z uporabo grafa trdnosti/raztezka, ki se pridobi iz preskusa natezne trdnosti. Ta metoda se lahko uporablja za vsak elastični material, ki se uporablja za obutev.

General Information

• Status: Published
• Publication Date: 30-Jun-2010
• Withdrawal Date: 30-Jan-2011
• ICS: 61.040 - Headgear. Clothing accessories. Fastening of clothing
• ICS: 61.060 - Footwear
• Technical Committee: CEN/TC 309 - Footwear
• Drafting Committee: CEN/TC 309/WG 1 - Minimum performance requirements and test methods for components for footwear
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Jul-2010
• Due Date: 19-Dec-2010
• Completion Date: 01-Jul-2010
• Ref Project: SIST EN ISO 10765:2010 - Footwear - Test method for the characterization of elastic materials - Tensile performance (ISO 10765:2010)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10765:2010
01-oktober-2010
2EXWHY3UHVNXVQDPHWRGD]DNDUDNWHUL]DFLMRHODVWLþQLKPDWHULDORY/DVWQRVWLSUL
QDWH]QLREUHPHQLWYL,62
Footwear - Test method for the characterization of elastic materials - Tensile
performance (ISO 10765:2010)
Schuhe - Prüfverfahren zur Charakterisierung elastischer Materialien -
Gebrauchsverhalten unter Zugbeanspruchung (ISO 10765:2010)
Chaussures - Méthode d'essai de caractérisation des matériaux élastiques -
Performances de traction (ISO 10765:2010)
Ta slovenski standard je istoveten z: EN ISO 10765:2010
ICS:
61.060 Obuvala Footwear
SIST EN ISO 10765:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10765:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 10765:2010


EUROPEAN STANDARD
EN ISO 10765

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2010
ICS 61.060
English Version
Footwear - Test method for the characterization of elastic
materials - Tensile performance (ISO 10765:2010)
Chaussures - Méthode d'essai de caractérisation des Schuhe - Prüfverfahren zur Charakterisierung elastischer
matériaux élastiques - Performances de traction (ISO Materialien - Gebrauchsverhalten unter Zugbeanspruchung
10765:2010) (ISO 10765:2010)
This European Standard was approved by CEN on 9 June 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10765:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10765:2010
EN ISO 10765:2010 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 10765:2010
EN ISO 10765:2010 (E)
Foreword
This document (EN ISO 10765:2010) has been prepared by Technical Committee CEN/TC 309 “Footwear”,
the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 "Footwear".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at
the latest by January 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 10765:2010

---------------------- Page: 6 ----------------------

SIST EN ISO 10765:2010

INTERNATIONAL ISO
STANDARD 10765
First edition
2010-07-01


Footwear — Test method for the
characterization of elastic materials —
Tensile performance
Chaussures — Méthode d'essai de caractérisation des matériaux
élastiques — Performances de traction





Reference number
ISO 10765:2010(E)
©
ISO 2010

---------------------- Page: 7 ----------------------

SIST EN ISO 10765:2010
ISO 10765:2010(E)
PDF disclaimer
This PDF file may contain e
...