EN ISO 10734:2016
(Main)Footwear - Test method for slide fasteners - Strength of slide fastener pullers (ISO 10734:2016)
Footwear - Test method for slide fasteners - Strength of slide fastener pullers (ISO 10734:2016)
ISO 10734:2016 specifies a test method intended to assess the strength of slide fastener pullers for footwear. The method is applicable to all types of footwear slide fastener.
Schuhe - Prüfverfahren für Reißverschlüsse - Festigkeit der Reißverschluss-Schiebergriffe (ISO 10734:2016)
Diese internationale Norm legt ein Prüfverfahren zur Beurteilung der Festigkeit von Reißverschluss-Schieber-griffen für Schuhe fest. Das Verfahren gilt für sämtliche Arten von Reißverschlüssen für Schuhe.
Chaussures - Méthodes d'essai des fermetures à glissière - Résistance des tirettes des fermetures à glissière (ISO 10734:2016)
ISO 10734:2016 spécifie une méthode d'essai destinée à évaluer la résistance des tirettes des fermetures à glissière pour chaussures. Cette méthode s'applique à tous les types de fermetures à glissière pour chaussures.
Obutev - Preskusna metoda za zadrge - Trdnost drsnega dela (ISO 10734:2016)
Ta standard določa preskusno metodo za oceno trdnosti drsnih delov zadrg pri obutvi. Ta metoda se uporablja se za vse vrste zadrg pri obutvi.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10734:2016
01-julij-2016
Obutev - Preskusna metoda za zadrge - Trdnost drsnega dela (ISO 10734:2016)
Footwear - Test method for slide fasteners - Strength of slide fastener pullers (ISO
10734:2016)
Schuhe - Prüfverfahren für Reißverschlüsse - Festigkeit der Reißverschluss-
Schiebergriffe (ISO 10734:2016)
Chaussures - Méthode d'essai pour les fermetures éclair - Résistance des
entraînements auxiliaires des fermetures éclair (ISO 10734:2016)
Ta slovenski standard je istoveten z: EN ISO 10734:2016
ICS:
61.040 3RNULYDOD'RGDWNLN Headgear. Clothing
REODþLORP6SHQMDQMHREODþLO accessories. Fastening of
clothing
61.060 Obuvala Footwear
SIST EN ISO 10734:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10734:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 10734:2016
EN ISO 10734
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2016
EUROPÄISCHE NORM
ICS 61.060
English Version
Footwear - Test method for slide fasteners - Strength of
slide fastener pullers (ISO 10734:2016)
Chaussures - Méthodes d'essai des fermetures à Schuhe - Prüfverfahren für Reißverschlüsse - Festigkeit
glissière - Résistance des tirettes des fermetures à der Reißverschluss-Schiebergriffe (ISO 10734:2016)
glissière (ISO 10734:2016)
This European Standard was approved by CEN on 15 April 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10734:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10734:2016
EN ISO 10734:2016 (E)
Contents
Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10734:2016
EN ISO 10734:2016 (E)
European foreword
This document (EN ISO 10734:2016) has been prepared by Technical Committee CEN/TC 309
“Footwear", the secretariat of which is held by AENOR, in collaboration with Technical Committee
ISO/TC 216 "Footwear".
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2016, and conflicting national standards
shall be withdrawn at the latest by November 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10734:2016 has been approved by CEN as EN ISO 10734:2016 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10734:2016
---------------------- Page: 6 ----------------------
SIST EN ISO 10734:2016
INTERNATIONAL ISO
STANDARD 10734
First edition
2016-05-01
Footwear — Test method for slide
fasteners — Strength of slide
fastener pullers
Chaussures — Méthodes d’essai
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.