EN ISO 10751:2016

Footwear - Test methods for slide fasteners - Resistance to repeated opening and closing (ISO 10751:2016)

ISO 10751:2016 describes a method intended to determine the resistance of a slide fastener to repeated opening and closing. The method is applicable to all types of slide fastener with a teeth length greater than 80 mm.

Schuhe - Prüfverfahren für Reißverschlüsse - Beständigkeit gegen wiederholtes Öffnen und Schließen (ISO 10751:2016)

Diese Norm beschreibt ein Verfahren zur Bestimmung der Beständigkeit eines Reißverschlusses gegen wiederholtes Öffnen und Schließen. Das Verfahren gilt für sämtliche Arten von Reißverschlüssen mit einer Kettenlänge von mehr als 80 mm.

Chaussures - Méthode d'essai pour les fermetures à glissière - Résistance aux ouvertures et fermetures répétées (ISO 10751:2016)

ISO 10751:2016 décrit une méthode destinée à déterminer la résistance d'une fermeture à glissière aux ouvertures et fermetures répétées. Cette méthode s'applique à tous les types de fermetures à glissière ayant une longueur supérieure à 80 mm.

Obutev - Preskusne metode za zadrge - Odpornost proti ponavljajočemu se odpiranju in zapiranju (ISO 10751:2016)

Ta standard opisuje metodo za določanje odpornosti zadrge proti ponavljajočemu se odpiranju in zapiranju.  Metoda se uporablja za vse vrste zadrg, daljših od 80 mm.

General Information

• Status: Published
• Publication Date: 17-May-2016
• Withdrawal Date: 29-Nov-2016
• ICS: 61.040 - Headgear. Clothing accessories. Fastening of clothing
• ICS: 61.060 - Footwear
• Technical Committee: CEN/TC 309 - Footwear
• Drafting Committee: CEN/TC 309/WG 1 - Minimum performance requirements and test methods for components for footwear
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 18-May-2016
• Due Date: 06-Nov-2014
• Completion Date: 18-May-2016
• Ref Project: SIST EN ISO 10751:2016 - Footwear - Test methods for slide fasteners - Resistance to repeated opening and closing (ISO 10751:2016)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10751:2016
01-julij-2016
2EXWHY3UHVNXVQHPHWRGH]D]DGUJH2GSRUQRVWSURWLSRQDYOMDMRþHPXVH
RGSLUDQMXLQ]DSLUDQMX,62
Footwear - Test methods for slide fasteners - Resistance to repeated opening and
closing (ISO 10751:2016)
Schuhe - Prüfverfahren für Reißverschlüsse - Beständigkeit gegen wiederholtes Öffnen
und Schließen (ISO 10751:2016)
Chaussures - Méthodes d'essai pour les fermetures éclair - Résistance aux ouvertures et
fermetures répétées (ISO 10751:2016)
Ta slovenski standard je istoveten z: EN ISO 10751:2016
ICS:
61.040 3RNULYDOD'RGDWNLN Headgear. Clothing
REODþLORP6SHQMDQMHREODþLO accessories. Fastening of
clothing
61.060 Obuvala Footwear
SIST EN ISO 10751:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10751:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 10751:2016


EN ISO 10751
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2016
EUROPÄISCHE NORM
ICS 61.060
English Version

Footwear - Test methods for slide fasteners - Resistance to
repeated opening and closing (ISO 10751:2016)
Chaussures - Méthode d'essai pour les fermetures à Schuhe - Prüfverfahren für Reißverschlüsse -
glissière - Résistance aux ouvertures et fermetures Beständigkeit gegen wiederholtes Öffnen und
répétées (ISO 10751:2016) Schließen (ISO 10751:2016)
This European Standard was approved by CEN on 15 April 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10751:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10751:2016
EN ISO 10751:2016 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 10751:2016
EN ISO 10751:2016 (E)
European foreword
This document (EN ISO 10751:2016) has been prepared by Technical Committee CEN/TC 309
“Footwear” the secretariat of which is held by AENOR, in collaboration with Technical Committee
ISO/TC 216 “Footwear”.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2016, and conflicting national standards
shall be withdrawn at the latest by November 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10751:2016 has been approved by CEN as EN ISO 10751:2016 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 10751:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 10751:2016
INTERNATIONAL ISO
STANDARD 10751
First edition
2016-05-01
Footwear — Test methods for slide
fasteners — Resistance to
...