Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2016)

ISO 1:2016 defines the concepts of a reference temperature and of the standard reference temperature, and specifies the standard reference temperature value for the specification of geometrical and dimensional properties of an object. Some examples of geometrical and dimensional properties include size, location, orientation (including angle), form and surface texture of a workpiece.
ISO 1:2016 Standard is also applicable to the definition of the measurand used in verification or calibration.

Geometrische Produktspezifikation (GPS) - Standardreferenztemperatur für die Geometrische Produktspezifikation und -prüfung (ISO 1:2016)

Diese Internationale Norm definiert die Konzepte einer Referenztemperatur und einer Standard-referenztemperatur und legt den Wert für die Standardreferenztemperatur für die Spezifikation der geometrischen und maßlichen Eigenschaften eines Objekts fest. Einige Beispiele von geometrischen und maßlichen Eigenschaften beinhalten Größenmaß, Ort, Ausrichtung (einschließlich Winkel), Form und Oberflächen¬textur eines Werkstücks.
Diese Internationale Norm gilt auch für die Definition der Messgröße, die in der Verifikation oder Kalibrierung verwendet wird.

Spécification géométrique des produits (GPS) - Température normale de référence pour la spécification des propriétés géométriques et dimensionnelles (ISO 1:2016)

ISO 1:2016 définit les concepts de température de référence et de température normale de référence, et spécifie la valeur de la température normale de référence pour la spécification des propriétés géométriques et dimensionnelles d'un objet. Certains exemples de propriétés géométriques et dimensionnelles incluent la taille, la position, l'orientation (y compris l'angle), la forme et l'état de surface d'une pièce.
ISO 1:2016 s'applique aussi à la définition du mesurande utilisé en vérification ou en étalonnage.

Specifikacije geometrijskih veličin izdelka (GPS) - Standardna referenčna temperatura za specifikacijo geometrijskih in dimenzijskih lastnosti (ISO 1:2016)

Ta mednarodni standard opredeljuje koncepte referenčne temperature in standardne referenčne temperature ter določa vrednost standardne referenčne temperature za specifikacijo geometrijskih in dimenzijskih lastnosti predmeta. Nekateri primeri geometrijskih in dimenzijskih lastnosti vključujejo velikost, lokacijo, usmerjenost (vključno s kotom), obliko in površinsko strukturo obdelovanca.
Ta mednarodni standard se uporablja tudi za opredelitev merjene veličine, ki se uporablja pri overjanju ali kalibraciji.

General Information

Status
Published
Publication Date
27-Sep-2016
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
28-Sep-2016
Completion Date
28-Sep-2016

RELATIONS

Buy Standard

Standard
EN ISO 1:2016
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 1:2016
01-december-2016
1DGRPHãþD
SIST EN ISO 1:2004
6SHFLILNDFLMHJHRPHWULMVNLKYHOLþLQL]GHOND *36 6WDQGDUGQDUHIHUHQþQD
WHPSHUDWXUD]DVSHFLILNDFLMRJHRPHWULMVNLKLQGLPHQ]LMVNLKODVWQRVWL ,62

Geometrical product specifications (GPS) - Standard reference temperature for the

specification of geometrical and dimensional properties (ISO 1:2016)
Geometrische Produktspezifikation (GPS) - Referenztemperatur für geometrische
Produktspezifikation und -prüfung (ISO 1:2016)

Spécification géométrique des produits (GPS) - Température normale de référence pour

la spécification géométrique des produits et vérification (ISO 1:2016)
Ta slovenski standard je istoveten z: EN ISO 1:2016
ICS:
17.040.40 6SHFLILNDFLMDJHRPHWULMVNLK Geometrical Product
YHOLþLQL]GHOND *36 Specification (GPS)
SIST EN ISO 1:2016 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 1:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 1:2016
EN ISO 1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2016
EUROPÄISCHE NORM
ICS 17.040.01 Supersedes EN ISO 1:2002
English Version
Geometrical product specifications (GPS) - Standard
reference temperature for the specification of geometrical
and dimensional properties (ISO 1:2016)

Spécification géométrique des produits (GPS) - Geometrische Produktspezifikation (GPS) -

Température normale de référence pour la Referenztemperatur für geometrische

spécification des propriétés géométriques et Produktspezifikation und -prüfung (ISO 1:2016)

dimensionnelles (ISO 1:2016)
This European Standard was approved by CEN on 7 August 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1:2016 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 1:2016
EN ISO 1:2016 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 1:2016
EN ISO 1:2016 (E)
European foreword

This document (EN ISO 1:2016) has been prepared by Technical Committee ISO/TC 213 "Dimensional

and geometrical product specifications and verification" in collaboration with Technical Committee

CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of

which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall

be withdrawn at the latest by March 2017.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent

rights.
This document supersedes EN ISO 1:2002.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,

Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 1:2016 has been approved by CEN as EN ISO 1:2016 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 1:2016
---------------------- Page: 6 ----------------------
SIST EN ISO 1:2016
INTERNATIONAL ISO
STANDARD 1
Third edition
2016-09-01
Geometrical product specifications
(GPS) — Standard reference
temperature for the specification
of geometrical and dimensional
properties
Spécification géométrique des produits (GPS) — Température
normale de référence pour la spécification des propriétés
géométriques et dimensionnelles
Reference number
ISO 1:2016(E)
ISO 2016
---------------------- Page: 7 ----------------------
SIST EN ISO 1:2016
ISO 1:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form

or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior

written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of

the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 1:2016
ISO 1:2016(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Terms and definitions ..................................................................................................................................................................................... 1

3 Standard reference temperature value for the specification of geometrical and

dimensional properties ................................................................................................................................................................................. 1

Annex A (informative) Use of the reference temperature specification .......................................................................... 2

Annex B (informative) Relation to the GPS matrix model .............................................................................................................. 3

Bibliography ................................................................................................................................................................................................................................ 4

© ISO 2016 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 1:2016
ISO 1:2016(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declaratio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.