EN 12235:2004
(Main)Surfaces for sports areas - Determination of vertical ball behaviour
Surfaces for sports areas - Determination of vertical ball behaviour
This European Standard specifies a method for determination of the rebound height of a ball from a surface, when dropped vertically.
It gives two alternative recording procedures for measuring the rebound height, visual and acoustic.
Sportböden - Bestimmung der Ballreflexion
Diese Europäische Norm legt ein Verfahren für die Bestimmung der Rücksprunghöhe eines Balls von einem Belag fest, wenn er senkrecht fallen gelassen wird.
Es existieren zwei alternative Registrierverfahren für die Messung der Rücksprunghöhe, ein optisches und ein akustisches Verfahren.
Sols sportifs - Détermination du comportement vertical de la balle/du ballon
La présente Norme européenne spécifie une méthode de détermination de la hauteur de rebond d'une balle ou d'un ballon sur une surface, lorsqu'elle/il tombe verticalement.
Elle indique deux méthodes possibles d'enregistrement de la hauteur de rebond mesurée, à savoir une méthode visuelle et une méthode acoustique.
Podloge za športne dejavnosti – Ugotavljanje obnašanja žoge pri navpičnem odboju
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DYSLþQHPRGERMXSportböden - Bestimmung der BallreflexionSols sportifs - Détermination du comportement vertical de la balle/du ballonSurfaces for sports areas - Determination of vertical ball behaviour97.220.20Oprema za zimske športeWinter sports equipment97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:EN 12235:2004SIST EN 12235:2005en,fr,de01-januar-2005SIST EN 12235:2005SLOVENSKI
STANDARD
SIST EN 12235:2005
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12235July 2004ICS 97.220.20English versionSurfaces for sports areas - Determination of vertical ballbehaviourSols sportifs - Détermination du comportement vertical dela balle/du ballonSportböden - Bestimmung der BallreflexionThis European Standard was approved by CEN on 13 May 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12235:2004: ESIST EN 12235:2005
EN 12235:2004 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Principle.4 4 Apparatus.4 5 Sports surface for testing.5 6 Conditioning.6 7 Procedure.6 7.1 Determination of the rebound height of the ball from concrete.6 7.2 Determination of the rebound height of the ball from the sports surface.7 8 Expression of results.7 9 Test report.7
SIST EN 12235:2005
EN 12235:2004 (E) 3 Foreword This document (EN 12235:2004) has been prepared by Technical Committee CEN/TC 217 “Surfaces for sports areas”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2005, and conflicting national standards shall be withdrawn at the latest by January 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 12235:2005
EN 12235:2004 (E) 4 1 Scope This European Standard specifies a method for determination of the rebound
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.