FprEN ISO 16119-5

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 5: Aerial spray systems (ISO/FDIS 16119-5:2018)

This part of ISO 16119 specifies requirements and methods for design and performance of aerial fixed wing and rotary aircraft platforms for agriculture, forestry and human health, with respect to minimizing the risk of environmental contamination.
It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those which are stated in ISO 16119-1, the requirements of this part of ISO 16119 take precedence over the requirements of ISO 16119-1 for machines within the scope of this part of ISO 16119.
It does not cover safety aspects (see ISO 4254-6) or required safety and design criteria for air worthiness and aircraft registration nor pilot requirements of various countries and localities.

Land- und Forstmaschinen - Umweltanforderungen an Pflanzenschutzgeräte - Teil 5: Spraysysteme (ISO/FDIS 16119-5:2018)

Matériel agricole et forestier - Exigences environnementales pour les pulvérisateurs - Partie 5: Systèmes aériens de pulvérisation (ISO/FDIS 16119-5:2018)

Kmetijski in gozdarski stroji - Okoljevarstvene zahteve za škropilnice - 5. del: Zračni sistemi (ISO/FDIS 16119-5:2018)

General Information

• Status: Not Published
• Publication Date: 22-Oct-2018
• Withdrawal Date: 22-Jan-2019
• ICS: 65.060.40 - Plant care equipment
• Technical Committee: CEN/TC 144 - Tractors and machinery for agriculture and forestry
• Drafting Committee: CEN/TC 144/WG 3 - Mobile machines and trailers
• Current Stage: 5098 - Decision to abandon - Formal Approval
• Completion Date: 11-Mar-2020
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/471 - Mandate addressed to CEN for standardisation in the field of machinery for pesticide application
• Ref Project: kSIST FprEN ISO 16119-5:2018 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 5: Aerial spray systems (ISO/FDIS 16119-5:2018)

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 16119-5:2017
01-februar-2017
.PHWLMVNLLQJR]GDUVNLVWURML2NROMHYDUVWYHQH]DKWHYH]DãNURSLOQLFHGHO
=UDþQLVLVWHPL,62',6
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 5:
Aerial spray systems (ISO/DIS 16119-5:2016)
Land- und Forstmaschinen - Umweltanforderungen an Pflanzenschutzgeräte - Teil 5:
Spraysysteme (ISO/DIS 16119-5:2016)
Matériel agricole et forestier - Exigences environnementales pour les pulvérisateurs -
Partie 5: Systèmes aériens de pulvérisation (ISO/DIS 16119-5:2016)
Ta slovenski standard je istoveten z: prEN ISO 16119-5
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
oSIST prEN ISO 16119-5:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 16119-5:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 16119-5:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16119-5
ISO/TC 23/SC 6 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2016-12-07 2017-02-28
Agricultural and forestry machinery — Environmental
requirements for sprayers —
Part 5:
Aerial spray systems
Matériel agricole et forestier — Exigences environnementales pour les pulvérisateurs —
Partie 5: Systèmes aériens de pulvérisation
ICS: 65.060.40
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16119-5:2016(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2016

---------------------- Page: 3 ----------------------
oSIST prEN ISO 16119-5:2017
ISO/DIS 16119-5:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 16119-5:2017
ISO/DIS 16119-5:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 List of significant hazards . 2
5 Requirements . 3
5.1 Sprayer tanks . 3
5.1.1 Materials .
...