iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 4035:2012

(Main)

Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)

Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)

ISO 4035:2012 specifies the characteristics of chamfered hexagon thin nuts (style 0), with threads from M1,6 up to and including M64, with product grade A for threads of diameter less than or equal to M16 and product grade B for threads of diameter greater than M16.

Niedrige Sechskantmuttern mit Fase (Typ 0) - Produktklassen A und B (ISO 4035:2012)

Diese Internationale Norm legt Eigenschaften von niedrigen Sechskantmuttern (Typ 0) mit Fase, mit Gewin-den von M1,6 bis M64, mit Produktklasse A für Gewinde D ≤ M16 und Produktklasse B für Gewinde D > M16, fest.
Falls in besonderen Fällen andere Festlegungen als die in dieser Internationalen Norm aufgeführten benötigt werden, können diese den entsprechenden Internationalen Normen entnommen werden, z. B. ISO 724, ISO 898-2, ISO 965-1, ISO 3506-2 und ISO 4759-1.

Écrous bas hexagonaux chanfreinés (style 0) - Grades A et B (ISO 4035:2012)

L'ISO 4035:2012 spécifie les caractéristiques des écrous bas hexagonaux chanfreinés (style 0), de diamètres de filetage M1,6 à M64 inclus, de grade A pour les filetages de diamètre inférieur ou égal à M16 et de grade B pour les filetages de diamètre supérieur à M16.

Šestrobe nizke matice s posnetjem (tip 0) - Razreda izdelave A in B (ISO 4035:2012)

Ta mednarodni standard določa značilnosti šestrobih nizkih matic s posnetjem (tip 0) z navoji od M1,6 do vključno M64, z razredom izdelave A za navoje s premerom ≤ M16 in razredom izdelave B za navoje s premerom > M16. Če so v posebnih primerih zahtevane specifikacije, ki niso navedene v tem mednarodnem standardu, jih je mogoče izbrati iz obstoječih mednarodnih standardov, na primer standardov ISO 724, ISO 898-2, ISO 965-1, ISO 3506-2 in ISO 4759-1.

General Information

Status
Withdrawn
Publication Date
18-Dec-2012
Withdrawal Date
05-Sep-2023
ICS
21.060.10 - Bolts, screws, studs
21.060.20 - Nuts
Technical Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Drafting Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Current Stage
Ref Project
SIST EN ISO 4035:2013 - Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)

Relations

Replaces
EN ISO 4035:2000 - Hexagon thin nuts (chamfered) - Product grades A and B (ISO 4035:1999)
Effective Date
08-Jun-2022
Replaced By
EN ISO 4035:2023 - Fasteners - Hexagon thin nuts (style 0) (ISO 4035:2023)
Effective Date
28-Jan-2023
Corrected By
EN ISO 4034:2012/AC:2013 - Hexagon regular nuts (style 1) - Product grade C - Technical Corrigendum 1 (ISO 4034:2012/Cor 1:2013)
Effective Date
20-Feb-2013
Revised
prEN ISO 4035 - Hexagon thin nuts (style 0), chamfered - Product grades A and B (ISO/DIS 4035:2016)
Effective Date
18-Jan-2023

Buy Standard

EN ISO 4035:2013EN ISO 4035:2013
PreviousNext
Standard
EN ISO 4035:2013
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4035:2013
01-maj-2013
1DGRPHãþD
SIST EN ISO 4035:2002
Šestrobe nizke matice s posnetjem (tip 0) - Razreda izdelave A in B (ISO
4035:2012)
Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)
Niedrige Sechskantmuttern mit Fase (Typ 0) - Produktklassen A und B (ISO 4035:2012)
Écrous bas hexagonaux chanfreinés (style 0) - Grades A et B (ISO 4035:2012)
Ta slovenski standard je istoveten z: EN ISO 4035:2012
ICS:
21.060.20 Matice Nuts
SIST EN ISO 4035:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4035:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 4035:2013


EUROPEAN STANDARD
EN ISO 4035

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2012
ICS 21.060.20 Supersedes EN ISO 4035:2000
English Version
Hexagon thin nuts chamfered (style 0) - Product grades A and B
(ISO 4035:2012)
Écrous bas hexagonaux chanfreinés (style 0) - Grades A et Sechskantmuttern, niedrige Form (mit Fase) -
B (ISO 4035:2012) Produktklassen A und B (ISO 4035:2012)
This European Standard was approved by CEN on 15 November 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4035:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 4035:2013
EN ISO 4035:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 4035:2013
EN ISO 4035:2012 (E)
Foreword
This document (EN ISO 4035:2012) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4035:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 4035:2012 has been approved by CEN as a EN ISO 4035:2012 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 4035:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 4035:2013
INTERNATIONAL ISO
STANDARD 4035
Fourth edition
2012-12-15
Hexagon thin nuts chamfered (style 0) —
Product grades A and B
Écrous bas hexagonaux chanfreinés (style 0) — Grades A et B
Reference number
ISO 4035:2012(E)
©
ISO 2012

---------------------- Page: 7 ----------------------

SIST EN ISO 4035:2013
ISO 4035:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14399-3:2015(Main)
High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
SIST EN 14399-3:2015

This European Standard specifies, together with EN 14399 1 and EN 14399 2, the requirements for assemblies of high-strength structural bolts and nuts of system HR suitable for preloaded joints with large widths across flats, thread sizes M12 to M36 and property classes 8.8/8 or 8.8/10 and 10.9/10.
Bolting assemblies in accordance with this document have been designed to allow preloading of at least 0,7 fub × As  ) according to EN 1993 1 8 (Eurocode 3) and to obtain ductility predominantly by plastic elongation of the bolt. For this purpose the components have the following characteristics:
-   normal nut height (style 1), see EN ISO 4032;
-   thread length of the bolt according to ISO 888.
Bolting assemblies in accordance with this document include washers according to EN 14399 6 or to EN 14399 5 (under the nut only).
NOTE   Attention is drawn to the importance of ensuring that bolting assemblies are correctly used if satisfactory results are to be obtained. For recommendations concerning proper application, reference to EN 1090-2 is made.
General requirements and requirements for suitability for preloading are specified in EN 14399 2.
Clamp lengths and grip lengths for the bolting assemblies are specified in the normative Annex A.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 225:2010(Main)
Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010)
SIST EN ISO 225:2012

ISO 225:2010 defines the symbols and gives descriptions of the dimensions of bolts, screws, studs and nuts in English, French and Russian, for use in the appropriate product standards and drawings.
The figures of the fasteners in ISO 225:2010 are given only as examples.
In addition to terms used in the three official ISO languages (English, French and Russian), ISO 225:2010 gives the equivalent terms in Chinese, German, Italian, Japanese, Spanish and Swedish.

  • Standard
    70 pages
    English, French, German and Russian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14831:2005(Main)
Fasteners - Tightening performance - Torque/Angle simplified test method
SIST EN 14831:2005

This European standard specifies a test method for fasteners with ISO metric thread from M6 to M16 and with property classes 8.8 to 12.9 for bolts and screws and with property classes 8 to 12 for nuts, to check their tightening performance in the elastic range.
It applies to steel fasteners with an ISO metric thread according to ISO 68-1.
It applies to fasteners having a friction coefficient from 0,06 up to and including 0,18. For higher values of friction coefficients, the dispersion of test results increases and the test method should not be applied. For lower values friction of coefficients, which are for very specific applications and require special lubrication, this standard does not apply.
This comparative test method can be used to monitor stability of a production process (such as coating, lubrication, shot-blasting) or to compare various production manufacturing lots. It can also be used to detect fasteners, which are out of specification.
NOTE   This simplified test method has been developed to avoid systematic use of more complex procedures.
In case of dispute the torque/tension test method according to EN ISO 16047 is the referee test.
This standard does not apply for assessment of fasteners in actual assembly conditions; it does not allow the measurement of operating friction coefficients.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 28839:1991(Main)
Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
SIST EN 28839:2000

Specifies the mechanical properties of products: with nominal thread diameters from M 1,6 to M 39 inclusive, with metric ISO thread in accordance with ISO 261, made of copper and copper alloys or aluminium and aluminium alloys; it does not apply to products with special property requirements.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1515-4:2021/AC:2022(Corrigendum)
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
SIST EN 1515-4:2021/AC:2022

This document is applicable to the selection of bolting for flanged joints on equipment subject to the Pressure Equipment Directive 2014/68/EU.
It specifies standards and additional requirements for dimensions, material properties and technical conditions of delivery for bolting.
NOTE 1   Washers are not within the scope of this document.
The selection is based on commonly used bolting. It covers common temperature ranges of the general service of flanges.
When selecting bolting according to this document it is essential to take into account environmental conditions and other parameters including type of fluids, corrosion hazards, sour service, low temperature brittle failure and relaxation at elevated temperatures.
The purpose of this document is to provide a selection of most commonly used bolting types and bolting material combinations.
It is not the intention to specify all possible applications but to give guidance on the most common applications. For example, application limits for material in the creep range are not explicitly covered in this document. Where material standard provides mechanical properties for the creep range respective reference is made in Table 3.
NOTE 2   Special services and ambient conditions may require the application of coatings. It is the purchaser’s option to decide on this. Depending on the coating used, a verification of the temperature ranges given in Table 3 and Table 4 may be required.
NOTE 3   In Annex B there are bolting types and bolting material combinations according to commonly used national standards other than those listed in Table 2, Table 3 and Table 4.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1515-4:2021(Main)
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
SIST EN 1515-4:2021

This document is applicable to the selection of bolting for flanged joints on equipment subject to the Pressure Equipment Directive 2014/68/EU.
It specifies standards and additional requirements for dimensions, material properties and technical conditions of delivery for bolting.
NOTE 1   Washers are not within the scope of this document.
The selection is based on commonly used bolting. It covers common temperature ranges of the general service of flanges.
When selecting bolting according to this document it is essential to take into account environmental conditions and other parameters including type of fluids, corrosion hazards, sour service, low temperature brittle failure and relaxation at elevated temperatures.
The purpose of this document is to provide a selection of most commonly used bolting types and bolting material combinations.
It is not the intention to specify all possible applications but to give guidance on the most common applications. For example, application limits for material in the creep range are not explicitly covered in this document. Where material standard provides mechanical properties for the creep range respective reference is made in Table 3.
NOTE 2   Special services and ambient conditions may require the application of coatings. It is the purchaser’s option to decide on this. Depending on the coating used, a verification of the temperature ranges given in Table 3 and Table 4 may be required.
NOTE 3   In Annex B there are bolting types and bolting material combinations according to commonly used national standards other than those listed in Table 2, Table 3 and Table 4.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14399-3:2015(Main)
High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
SIST EN 14399-3:2015

This European Standard specifies, together with EN 14399 1 and EN 14399 2, the requirements for assemblies of high-strength structural bolts and nuts of system HR suitable for preloaded joints with large widths across flats, thread sizes M12 to M36 and property classes 8.8/8 or 8.8/10 and 10.9/10.
Bolting assemblies in accordance with this document have been designed to allow preloading of at least 0,7 fub × As  ) according to EN 1993 1 8 (Eurocode 3) and to obtain ductility predominantly by plastic elongation of the bolt. For this purpose the components have the following characteristics:
-   normal nut height (style 1), see EN ISO 4032;
-   thread length of the bolt according to ISO 888.
Bolting assemblies in accordance with this document include washers according to EN 14399 6 or to EN 14399 5 (under the nut only).
NOTE   Attention is drawn to the importance of ensuring that bolting assemblies are correctly used if satisfactory results are to be obtained. For recommendations concerning proper application, reference to EN 1090-2 is made.
General requirements and requirements for suitability for preloading are specified in EN 14399 2.
Clamp lengths and grip lengths for the bolting assemblies are specified in the normative Annex A.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 225:2010(Main)
Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010)
SIST EN ISO 225:2012

ISO 225:2010 defines the symbols and gives descriptions of the dimensions of bolts, screws, studs and nuts in English, French and Russian, for use in the appropriate product standards and drawings.
The figures of the fasteners in ISO 225:2010 are given only as examples.
In addition to terms used in the three official ISO languages (English, French and Russian), ISO 225:2010 gives the equivalent terms in Chinese, German, Italian, Japanese, Spanish and Swedish.

  • Standard
    70 pages
    English, French, German and Russian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14831:2005(Main)
Fasteners - Tightening performance - Torque/Angle simplified test method
SIST EN 14831:2005

This European standard specifies a test method for fasteners with ISO metric thread from M6 to M16 and with property classes 8.8 to 12.9 for bolts and screws and with property classes 8 to 12 for nuts, to check their tightening performance in the elastic range.
It applies to steel fasteners with an ISO metric thread according to ISO 68-1.
It applies to fasteners having a friction coefficient from 0,06 up to and including 0,18. For higher values of friction coefficients, the dispersion of test results increases and the test method should not be applied. For lower values friction of coefficients, which are for very specific applications and require special lubrication, this standard does not apply.
This comparative test method can be used to monitor stability of a production process (such as coating, lubrication, shot-blasting) or to compare various production manufacturing lots. It can also be used to detect fasteners, which are out of specification.
NOTE   This simplified test method has been developed to avoid systematic use of more complex procedures.
In case of dispute the torque/tension test method according to EN ISO 16047 is the referee test.
This standard does not apply for assessment of fasteners in actual assembly conditions; it does not allow the measurement of operating friction coefficients.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1515-2:2001(Main)
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
SIST EN 1515-2:2002

This European Standard covers the classification of bolt materials combination with the flange material groups of steel flanges prEN 1092-1 (PN-designated).
Bolt materials are listed in EN 1515-1, flange material groups are listed in prEN 1092-1.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day