EN ISO 24373:2009

Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2008)

ISO 24373:2008 specifies requirements for classification of solid wires and rods for fusion welding of copper and copper alloys. The classification of the solid wires and rods is based on their chemical composition.

Schweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Kupfer und Kupferlegierungen - Einteilung (ISO 24373:2008)

Diese Internationale Norm legt Anforderungen für die Einteilung von Massivdrähten und Massivstäben zum
Schmelzschweißen von Kupfer und Kupferlegierungen fest. Die Einteilung der Massivdrähte und Massivstäbe
erfolgt nach ihrer chemischen Zusammensetzung.

Produits consommables pour le soudage - Fils pleins et baguettes pleines pour le soudage par fusion du cuivre et des alliages de cuivre - Classification (ISO 24373:2008)

L'ISO 24373:2008 spécifie les exigences relatives à la classification des fils pleins et des baguettes pleines pour le soudage par fusion du cuivre et des alliages de cuivre. La classification des fils pleins et des baguettes pleines est basée sur leur composition chimique.

Dodajni materiali za varjenje - Masivne žice in palice za talilno varjenje bakra in bakrovih zlitin - Razvrstitev (ISO 24373:2008)

Ta mednarodni standard določa zahteve za razvrstitev masivnih žic in palic za talilno varjenje bakra in bakrovih zlitin. Razvrstitev masivnih žic in palic temelji na kemijski sestavi.

General Information

• Status: Withdrawn
• Publication Date: 21-Apr-2009
• Withdrawal Date: 18-Sep-2018
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 3 - Welding consumables
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 19-Sep-2018
• Ref Project: SIST EN ISO 24373:2012 - Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2008)

Relations

• Replaces: EN 14640:2005 - Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification
• Effective Date: 08-Jun-2022
• Replaced By: EN ISO 24373:2018 - Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2018)
• Effective Date: 12-Oct-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 24373:2012
01-september-2012
1DGRPHãþD
SIST EN 14640:2005
Dodajni materiali za varjenje - Masivne žice in palice za talilno varjenje bakra in
bakrovih zlitin - Razvrstitev (ISO 24373:2008)
Welding consumables - Solid wires and rods for fusion welding of copper and copper
alloys - Classification (ISO 24373:2008)
Schweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Kupfer und
Kupferlegierungen - Einteilung (ISO 24373:2008)
Produits consommables pour le soudage - Fils pleins et baguettes pleines pour le
soudage par fusion du cuivre et des alliages de cuivre - Classification (ISO 24373:2008)
Ta slovenski standard je istoveten z: EN ISO 24373:2009
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
77.120.30 Baker in bakrove zlitine Copper and copper alloys
SIST EN ISO 24373:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 24373:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 24373:2012
EUROPEAN STANDARD
EN ISO 24373
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2009
ICS 25.160.20 Supersedes EN 14640:2005
English Version
Welding consumables - Solid wires and rods for fusion welding
of copper and copper alloys - Classification (ISO 24373:2008)
Produits consommables pour le soudage - Fils pleins et Schweißzusätze - Massivdrähte und -stäbe zum
baguettes pleines pour le soudage par fusion du cuivre et Schmelzschweißen von Kupfer und Kupferlegierungen -
des alliages de cuivre - Classification (ISO 24373:2008) Einteilung (ISO 24373:2008)
This European Standard was approved by CEN on 10 April 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24373:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 24373:2012
EN ISO 24373:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 24373:2012
EN ISO 24373:2009 (E)
Foreword
The text of ISO 24373:2008 has been prepared by Technical Committee ISO/TC 44 “Welding and allied
processes” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
24373:2009 by Technical Committee CEN/TC 121 “Welding” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at
the latest by October 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14640:2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 24373:2008 has been approved by CEN as a EN ISO 24373:2009 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 24373:2012

---------------------- Page: 6 ----------------------

S
...