EN ISO 28199-1:2021

Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 1: Vocabulary and preparation of test panels (ISO 28199-1:2021)

This document defines terms relating to the evaluation of coating materials in research, development and production with regard to their suitability and safety for industrial processes and error analysis.
This document also specifies methods for the preparation of test panels and the subsequent measurement of film thickness, colour, surface texture and other measurable surface properties.

Beschichtungsstoffe - Beurteilung spritzapplikationsbedingter Eigenschaften von Beschichtungssystemen - Teil 1: Begriffe und Vorbereitung der Probenplatten (ISO 28199-1:2021)

Dieses Dokument legt Begriffe zur Beurteilung von Beschichtungsstoffen in Forschung, Entwicklung und Produktion bezüglich ihrer Prozesseignung, Prozesssicherheit und Fehleranalyse fest.
Dieses Dokument legt auch Verfahren zum Vorbereiten der Probenplatten und zum anschließenden Messen von Schichtdicke, Farbe, Oberflächenstruktur und weiteren messbaren Oberflächeneigenschaften fest.

Peintures et vernis - Évaluation des propriétés des systèmes de revêtement liées au mode d'application par pulvérisation - Partie 1: Vocabulaire et préparation des panneaux d'essai (ISO 28199-1:2021)

Le présent document définit des termes liés à l'évaluation des matériaux de revêtement, aux niveaux recherche, développement et production, en ce qui concerne leur adaptation aux procédés industriels et leur sécurité ainsi que l'analyse des erreurs.
Le présent document spécifie également des méthodes de préparation des panneaux d'essai et de mesurage ultérieur de l'épaisseur du feuil, de sa couleur, de sa texture superficielle et d'autres propriétés de surface mesurables.

Barve in laki - Vrednotenje lastnosti premaznih sistemov pri nanašanju s prašenjem - 1. del: Slovar in priprava preskusnih plošč (ISO 28199-1:2021)

General Information

• Status: Published
• Publication Date: 13-Apr-2021
• Withdrawal Date: 30-Oct-2021
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 14-Apr-2021
• Completion Date: 14-Apr-2021
• Ref Project: SIST EN ISO 28199-1:2021 - Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 1: Vocabulary and preparation of test panels (ISO 28199-1:2021)

Relations

• Replaces: EN ISO 28199-1:2009/AC:2009 - Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels - Technical Corrigendum 1 (ISO 28199-1:2009/Cor 1:2009)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 28199-1:2009 - Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009)
• Effective Date: 21-Apr-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2021
Nadomešča:
SIST EN ISO 28199-1:2010
SIST EN ISO 28199-1:2010/AC:2010
Barve in laki - Vrednotenje lastnosti premaznih sistemov pri nanašanju s
prašenjem - 1. del: Slovar in priprava preskusnih plošč (ISO 28199-1:2021)
Paints and varnishes - Evaluation of properties of coating systems related to the spray
application process - Part 1: Vocabulary and preparation of test panels (ISO 28199-
1:2021)
Beschichtungsstoffe - Beurteilung spritzapplikationsbedingter Eigenschaften von
Beschichtungssystemen - Teil 1: Begriffe und Vorbereitung der Probenplatten (ISO
28199-1:2021)
Peintures et vernis - Évaluation des propriétés des systèmes de revêtement liées au
mode d'application par pulvérisation - Partie 1: Vocabulaire et préparation des panneaux
d'essai (ISO 28199-1:2021)
Ta slovenski standard je istoveten z: EN ISO 28199-1:2021
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 28199-1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2021
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 28199-1:2009
English Version
Paints and varnishes - Evaluation of properties of coating
systems related to the spray application process - Part 1:
Vocabulary and preparation of test panels (ISO 28199-
1:2021)
Peintures et vernis - Évaluation des propriétés des Beschichtungsstoffe - Beurteilung
systèmes de revêtement liées au mode d'application spritzapplikationsbedingter Eigenschaften von
par pulvérisation - Partie 1: Vocabulaire et préparation Beschichtungssystemen - Teil 1: Begriffe und
des panneaux d'essai (ISO 28199-1:2021) Vorbereitung der Probenplatten (ISO 28199-1:2021)
This European Standard was approved by CEN on 10 March 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28199-1:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 28199-1:2021) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2021, and conflicting national standards shall
be withdrawn at the latest by October 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 28199-1:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 28199-1:2021 has been approved by CEN as EN ISO 28199-1:2021 without any
modification.
INTERNATIONAL ISO
STANDARD 28199-1
Second edition
2021-03
Paints and varnishes — Evaluation of
properties of coating systems related
to the spray application process —
Part 1:
Vocabulary and preparation of test
panels
Peintures et vernis — Évaluation des propriétés des systèmes de
revêtement liées au mode d'application par pulvérisation —
Partie 1: Vocabulaire et préparation des panneaux d'essai
Reference number
ISO 28199-1:2021(E)
©
ISO 2021
ISO 28199-1:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

ISO 28199-1:2021(E)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 6
5 Apparatus . 7
6 Calibration . 7
7 Sampling . 7
8 Test panels . 7
8.1 Substrate . 7
8.2 Preparation of the test panel . 7
8.3 Coating of the test panel . 9
8.3.1 General. 9
8.3.2 Version A (perforated panel) . 9
8.3.3 Version B (non-perforated panel) .10
8.4 Film thickness .12
9 Procedure.13
9.1 Conditioning the test panels .13
9.2 Test conditions .13
9.3 Number of test panels to be measured .13
9.4 Test .13
9.4.1 Measurement pattern .13
9.4.2 Film thickness .15
9.4.3 Colour .15
9.4.4 Surface texture .16
9.4.5 Mottling . .16
9.4.6 Gloss .16
10 Evaluation .16
11 Precision .16
12 Test report .16
Annex A (informative) Examples of suitable application parameters .17
Bibliography .22
ISO 28199-1:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identifi
...