prEN 15273-4
(Main)Railway applications - Gauges - Part 4: Catalogue of defined gauges
Railway applications - Gauges - Part 4: Catalogue of defined gauges
The gauges included in this document have been developed for application on mainline railway networks using various track gauges. Other networks are outside the scope of this document, but the rules may be applied to them.
This document is a catalogue of reference profiles and their associated rules for the defined gauging process. This document is intended to be used with EN 15273-1, EN 15273-2 and EN 15273-3.
This document is not applicable to the gauges “S” and “T” for track gauge 1 520 mm.
Bahnanwendungen - Begrenzungslinien - Teil 4: Katalog der definierten Begrenzungslinien
Applications ferroviaires - Gabarits - Partie 4 : Catalogue des gabarits définis
Železniške naprave - Profili - 4. del: Katalog določenih profilov
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2023
Železniške naprave - Profili - 4. del: Katalog določenih profilov
Railway applications - Gauges - Part 4: Catalogue of defined gauges
Bahnanwendungen - Begrenzungslinien - Teil 4: Katalog der definierten
Begrenzungslinien
Applications ferroviaires - Gabarits - Partie 4 : Catalogue des gabarits définis
Ta slovenski standard je istoveten z: prEN 15273-4
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2023
ICS
English Version
Railway applications - Gauges - Part 4: Catalogue of
defined gauges
Applications ferroviaires - Gabarits - Partie 4 : Bahnanwendungen - Lichtraum - Teil 4: Katalog der
Catalogue des gabarits définis Begrenzungslinien
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15273-4:2023 E
worldwide for CEN national Members.
Contents
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Symbols and abbreviations . 7
5 Static gauges . 7
5.1 Lower parts . 7
5.1.1 Static gauge GI1 . 7
5.1.2 Static gauge GI2 . 9
5.1.3 Static gauge GEI1 . 10
5.1.4 Static gauge GEE10 . 10
5.1.5 Static gauge FIN1 . 12
5.2 Upper parts . 13
5.2.1 Static gauge G1 . 13
5.2.2 Static gauge G2 . 15
5.2.3 Static gauge GA . 16
5.2.4 Static gauge GB . 18
5.2.5 Static gauge GC . 20
5.2.6 Static gauge GB1 . 21
5.2.7 Static gauge GB2 . 22
5.2.8 Static gauge GHE16 . 24
5.2.9 Static gauge GEA16 . 25
5.2.10 Static gauge GEB16 . 27
5.2.11 Static gauge GEC16 . 28
5.2.12 Static gauge GEE10 . 29
5.2.13 Static gauge GED10 . 31
5.2.14 Static gauge FIN1 . 32
5.3 Gauges based on Russian state standards . 34
6 Kinematic gauges . 34
6.1 Lower parts . 34
6.1.1 Kinematic gauge GI1 . 34
6.1.2 Kinematic gauge GI2 . 35
6.1.3 Kinematic gauge GI3 . 37
6.1.4 Kinematic gauge GEI1 . 38
6.1.5 Kinematic gauge GEI2 . 39
6.1.6 Kinematic gauge GEI3 . 40
6.1.7 Kinematic gauge GEC14 . 41
6.1.8 Kinematic gauge GEE10 . 43
6.1.9 Kinematic gauge PT1 . 44
6.1.10 Kinematic gauge PT2 . 45
6.1.11 Kinematic gauge EBV U3 . 46
6.2 Upper Parts . 47
6.2.1 Kinematic gauge G1 . 47
6.2.2 Kinematic gauge G2 . 49
6.2.3 Kinematic gauge GA . 50
6.2.4 Kinematic gauge GB . 52
6.2.5 Kinematic gauge GC. 54
6.2.6 Kinematic gauge GB1 . 55
6.2.7 Kinematic gauge GB2 . 56
6.2.8 Kinematic gauge DE1 . 58
6.2.9 Kinematic gauge DE2 . 59
6.2.10 Kinematic gauge DE3 . 61
6.2.11 Kinematic gauge FR3.3 . 62
6.2.12 Kinematic gauge BE1 . 64
6.2.13 Kinematic gauge BE2 . 66
6.2.14 Kinematic gauge BE3 . 67
6.2.15 Kinematic gauge BE4 . 68
6.2.16 Kinematic gauge NL1 . 69
6.2.17 Kinematic gauge NL2 . 71
6.2.18 Kinematic Gauge EBVO1. 72
6.2.19 Kinematic gauge EBVO2 . 73
6.2.20 Kinematic gauge EBVO3 . 74
6.2.21 Kinematic gauges GHE16 . 75
6.2.22 Kinematic gauge GEA16 . 76
6.2.23 Kinematic gauge GEB16 . 78
6.2.24 Kinematic gauge GEC16 . 80
6.2.25 Kinematic gauges GEE10 . 81
6.2.26 Kinematic gauges GED10 . 82
6.2.27 Kinematic gauge PTb . 83
6.2.28 Kinematic gauge PTb+ . 85
6.2.29 Kinematic gauge PTc . 87
6.2.30 Kinematic Gauge DK1 .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.