oSIST prEN 15273-4:2023
(Main)Railway applications - Gauges - Part 4: Catalogue of defined gauges
Railway applications - Gauges - Part 4: Catalogue of defined gauges
The gauges included in this document have been developed for application on mainline railway networks using various track gauges. Other networks are outside the scope of this document, but the rules may be applied to them.
This document is a catalogue of reference profiles and their associated rules for the defined gauging process. This document is intended to be used with EN 15273-1, EN 15273-2 and EN 15273-3.
This document is not applicable to the gauges “S” and “T” for track gauge 1 520 mm.
Bahnanwendungen - Begrenzungslinien - Teil 4: Katalog der definierten Begrenzungslinien
Applications ferroviaires - Gabarits - Partie 4 : Catalogue des gabarits définis
Železniške naprave - Profili - 4. del: Katalog določenih profilov
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 15273-4:2023
01-maj-2023
Železniške naprave - Profili - 4. del: Katalog določenih profilov
Railway applications - Gauges - Part 4: Catalogue of defined gauges
Bahnanwendungen - Begrenzungslinien - Teil 4: Katalog der definierten
Begrenzungslinien
Applications ferroviaires - Gabarits - Partie 4 : Catalogue des gabarits définis
Ta slovenski standard je istoveten z: prEN 15273-4
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
oSIST prEN 15273-4:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15273-4:2023
---------------------- Page: 2 ----------------------
oSIST prEN 15273-4:2023
DRAFT
EUROPEAN STANDARD
prEN 15273-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2023
ICS
English Version
Railway applications - Gauges - Part 4: Catalogue of
defined gauges
Applications ferroviaires - Gabarits - Partie 4 : Bahnanwendungen - Lichtraum - Teil 4: Katalog der
Catalogue des gabarits définis Begrenzungslinien
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15273-4:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15273-4:2023
prEN 15273-4:2023(E)
Contents
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Symbols and abbreviations . 7
5 Static gauges . 7
5.1 Lower parts . 7
5.1.1 Static gauge GI1 . 7
5.1.2 Static gauge GI2 . 9
5.1.3 Static gauge GEI1 . 10
5.1.4 Static gauge GEE10 . 10
5.1.5 Static gauge FIN1 . 12
5.2 Upper parts . 13
5.2.1 Static gauge G1 . 13
5.2.2 Static gauge G2 . 15
5.2.3 Static gauge GA . 16
5.2.4 Static gauge GB . 18
5.2.5 Static gauge GC . 20
5.2.6 Static gauge GB1 . 21
5.2.7 Static gauge GB2 . 22
5.2.8 Static gauge GHE16 . 24
5.2.9 Static gauge GEA16 . 25
5.2.10 Static gauge GEB16 . 27
5.2.11 Static gauge GEC16 . 28
5.2.12 Static gauge GEE10 . 29
5.2.13 Static gauge GED10 . 31
5.2.14 Static gauge FIN1 . 32
5.3 Gauges based on Russian state standards . 34
6 Kinematic gauges . 34
6.1 Lower parts . 34
6.1.1 Kinematic gauge GI1 . 34
6.1.2 Kinematic gauge GI2 . 35
6.1.3 Kinematic gauge GI3 . 37
6.1.4 Kinematic gauge GEI1 . 38
6.1.5 Kinematic gauge GEI2 . 39
6.1.6 Kinematic gauge GEI3 . 40
6.1.7 Kinematic gauge GEC14 . 41
6.1.8 Kinematic gauge GEE10 . 43
6.1.9 Kinematic gauge PT1 . 44
6.1.10 Kinematic gauge PT2 . 45
6.1.11 Kinematic gauge EBV U3 . 46
6.2 Upper Parts . 47
6.2.1 Kinematic gauge G1 . 47
6.2.2 Kinematic gauge G2 . 49
6.2.3 Kinematic gauge GA . 50
2
---------------------- Page: 4 ----------------------
oSIST prEN 15273-4:2023
prEN 15273-4:2023 (E)
6.2.4 Kinematic gauge GB . 52
6.2.5 Kinematic gauge GC. 54
6.2.6 Kinematic gauge GB1 . 55
6.2.7 Kinematic gauge GB2 . 56
6.2.8 Kinematic gauge DE1 . 58
6.2.9 Kinematic gauge DE2 . 59
6.2.10 Kinematic gauge DE3 . 61
6.2.11 Kinematic gauge FR3.3 . 62
6.2.12 Kinematic gauge BE1 . 64
6.2.13 Kinematic gauge BE2 . 66
6.2.14 Kinematic gauge BE3 . 67
6.2.15 Kinematic gauge BE4 . 68
6.2.16 Kinematic gauge NL1 . 69
6.2.17 Kinematic gauge NL2 . 71
6.2.18 Kinematic Gauge EBVO1. 72
6.2.19 Kinematic gauge EBVO2 . 73
6.2.20 Kinematic gauge EBVO3 . 74
6.2.21 Kinematic gauges GHE16 . 75
6.2.22 Kinematic gauge GEA16 . 76
6.2.23 Kinematic gauge GEB16 . 78
6.2.24 Kinematic gauge GEC16 . 80
6.2.25 Kinematic gauges GEE10 . 81
6.2.26 Kinematic gauges GED10 . 82
6.2.27 Kinematic gauge PTb . 83
6.2.28 Kinematic gauge PTb+ . 85
6.2.29 Kinematic gauge PTc . 87
6.2.30 Kinematic Gauge DK1 . 88
6.2.31 Kinematic gauge GCZ3 . 89
7 Dynamic gauges . 91
7.1 Dynamic gauge SEa . 91
7.1.1 Lower part of the reference profile SEa . 91
7.1.2 Upper part of the reference profile SEa . 91
7.1.3 Pantograph reference profile for gauge SEa . 92
7.1.4 Basic data . 93
7.1.5 Calculation cases . 94
7.1.6 Lateral projections . 94
7.1.7 Vertical projections . 95
7.2 Dynamic gauge SEc . 95
7.2.1 General . 95
7.2.2 Lower part of the reference profile SEc . 95
7.2.3 Upper part of the reference profile SEc . 95
7.2.4 Pantograph reference profile . 96
7.2.5 Basic data . 96
7.2.6 Calculation cases . 96
7.2.7 Lateral projections . 96
7.2.8 Vertical projections . 96
7.3 Dynamic gauge NO1 . 96
7.3.1 General . 96
7.3.2 Lower part of the reference profile NO1 . 96
7.3.3 Upper part of the reference profile NO1 . 97
7.3.4 Pantograph reference profile for gauge NO1 . 97
7.3.5 Basic data . 98
3
---------------------- Page: 5 ----------------------
oSIST prEN 15273-4:2023
prEN 15273-4:2023(E)
7.3.6 Calculation cases . 99
7.3.7 Lateral projections . 99
7.3.8 Vertical projections . 100
7.4 Dynamic gauge NO2 . 100
7.4.1 Lower part of the reference profile NO2 . 100
7.4.2 Upper part of the reference profile NO2. 100
7.4.3 Pantograph reference profile . 100
7.4.4 Basic data . 101
7.4.5 Calculation cases . 101
7.4.6 Lateral projections . 101
7.4.7 Vertical projections . 101
8 Pantograph gauges . 101
8.1 Pantograph reference profile . 101
8.2 Basic data . 102
8.3 Lateral projections . 103
9 Wheel zone . 103
9.1 Reference profile. 103
9.2 Basic data . 106
10 Marshalling humps and track brakes . 107
11 Contact ramp zone . 109
12 Passing over link spans onto ferries . 109
Annex A (informative) Combination of upper and lower parts . 110
A.1 Static gauges . 110
A.2 Kinematic gauges . 111
Annex B (informative) List of tables and list of figures . 113
B.1 List of Tables . 113
B.2 List of Figures . 115
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive (EU) 2016/797 aimed to be covered . 117
Bibliography . 124
4
---------------------- Page: 6 ----------------------
oSIST prEN 15273-4:2023
prEN 15273-4:2023 (E)
European foreword
This document (prEN 15273-4:2023) has been prepared by Technical Committee CEN/TC 256 “Railway
Applications”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This European Standard is one of the series prEN 15273, Railway applications — Gauges as listed below:
— prEN 15273-1, General common rules for Rolling Stock and Infrastructure gives the general
explanations of gauging and defines the sharing of the space between rolling stock and
infrastructure;
— prEN 15273-2, Rolling stock gives the rules for dimensioning vehicles;
— prEN 15273-3, Infrastructure gives the rules for positioning the infrastructure;
— prEN 15273-4, Catalogue of defined gauges includes a non-exhaustive list of reference profiles and
parameters to be used by infrastructure and rolling stock;
— prCEN/TR 15273-5, Background, explanation and worked examples.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of
EU Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral
part of this document.
5
---------------------- Page: 7 ----------------------
oSIST prEN 15273-4:2023
prEN 15273-4:2023(E)
Introduction
The aim of this standard is to define the rules for the calculation and verification of the dimensions of
rolling stock and infrastructure from a gauging perspective.
This standard describes gauging processes taking into account the relative movements between rolling
stock and infrastructure as well as the necessary margins or clearances
This part of the series EN 15273 covers a catalogue of gauges and associated rules and is used in
conjunction with the following parts:
— Part 1: General common rules for Rolling Stock and Infrastructure;
— Part 2: Rolling stock;
— Part 3: Infrastructure;
— Part 5: Background, explanation and worked examples.
6
---------------------- Page: 8 ----------------------
oSIST prEN 15273-4:2023
prEN 15273-4:2023 (E)
1 Scope
The gauges included in this document have been developed for application on mainline railway
networks using various track gauges. Other networks are outside the scope of this document, but the
rules may be applied to them.
This document is a catalogue of reference profiles and their associated rules for the defined gauging
process. This document is intended to be used with prEN 15273-1:2023, prEN 15273-2:2023 and
prEN 15273-3:2023.
This document is not applicable to the gauges “S” and “T” for track gauge 1 520 mm.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
prEN 15273-1:2023, Railway applications — Gauges — Part 1: General common rules for Rolling stock
and Infrastructure
prEN 15273-2:2023, Railway applications — Gauges — Part 2: Rolling stock
prEN 15273-3:2023, Railway applications — Gauges — Part 3: Infrastructure
3 Terms and definitions
For the purposes of this document, the terms and definitions given in prEN 15273-1:2023 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
4 Symbols and abbreviations
For the purposes of this document, the symbols and abbreviations given in prEN 15273-1:2023 apply.
5 Static gauges
5.1 Lower parts
5.1.1 Static gauge GI1
5.1.1.1 Reference profile
Figure 1 shows the reference profile for static gauge GI1.
7
---------------------- Page: 9 ----------------------
oSIST prEN 15273-4:2023
prEN 15273-4:2023(E)
Dimensions in millimetres
Key
1 running plane
2 centreline of the reference profile
3 for rolling stock, values can be reduced by 15 mm for unsprung parts
Figure 1 —Reference profile for static gauge GI1
5.1.1.2 Basic data
Table 1 gives the basic data to be considered for GI1 static gauge calculations.
Table 1 — Values to be considered for GI1 static gauge calculations
L l l R R
nom max min v min
s
lim
m m m m m
1,5 0,2 1,435 1,465 150 500
5.1.1.3 Lateral projections
Table 2 gives the lateral projections for the static gauge GI1.
Table 2 — Formulae for the lateral projections of static gauge GI1
Formula
Height Radius
Inside curve Outside curve
2,5
SS
∞≥≥R 250
R,a R,i
R
h ≤ 0,43
CR
50 60
250>≥R 150 S − 0,190 S − 0, 230
R,i R,a
R R
l−l
[ ]
applicable applicable
nom
>0
S =
l
for all heights for all radii
2
8
= =
==
---------------------- Page: 10 ----------------------
oSIST prEN 15273-4:2023
prEN 15273-4:2023 (E)
5.1.1.4 Vertical projections
Table 3 gives the vertical projections for the static gauge GI1.
Table 3 — Vertical projections for lower parts
S
Height
v,u
50
Applicable for all heights
R
v
5.1.2 Static gauge GI2
5.1.2.1 Reference profile
Figure 2 shows the static reference profile GI2.
Dimensions in millimetres
Key
1 running plane
2 centerline of the reference profile
3 for rolling stock, values can be reduced by 15 mm for unspring parts
Figure 2 — Reference profile for static gauge GI2
5.1.2.2 Basic data
The basic data for the static gauge GI2 are the same as for the static gauge GI1, given in Table 1.
5.1.2.3 Lateral projections
The lateral projections for the static gauge GI2 are the same as for the static gauge GI1, given in Table 2.
5.1.2.4 Vertical projections
The vertical projections for the static gauge GI2 are the same as for the static gauge GI1, given in
Table 3.
9
---------------------- Page: 11 ----------------------
oSIST prEN 15273-4:2023
prEN 15273-4:2023(E)
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.