EN 12697-36:2003

Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement

Both methods can be used for the determination of the thickness of a bituminous paving construction. When compliance is to be established, the method to be used and -if relevant- the position of the cores in the slab should be agreed in advance by the relevant parties.

Asphalt - Prüfverfahren für Heißasphalt - Teil 36: Bestimmung der Dicke von Fahrbahnbefestigungen aus Asphalt

Beide Verfahren können zur Messung der Dicke einer Asphaltkonstruktion angewendet werden. Wenn Übereinstimmung erforderlich ist, sind das zu verwendende Verfahren und ggf- die Entnahmestellen der Bohrkerne zwischen den Vertragsparteien zu vereinbaren.

Mélanges bitumineux - Méthodes d'essai pour enrobés à chaud - Partie 36: Détermination des épaisseurs de chaussée bitumieuse

La présente Norme européenne précise les exigences concernant les mesures sur les bogies à deux essieux, qui assurent que les opérations de mesure sont effectuées en fonction de critères unifiés. Elle est applicable aux bogies à deux essieux neufs ou modifiés.
Les prescriptions allant au-delà du domaine d'application et de ses exigences font l'objet d'un contrat particulier entre les parties concernées.
Les opérations de mesure se rapportent à des bogies, dans leur totalité avec ou sans superstructure ou à certaines parties de ceux-ci lorsque leur conception géométrique ne permet pas de faire autrement. Il y a lieu, le cas échéant, de procéder à des opérations de mesure supplémentaires, non prévues ici, qui sont déterminées au cas par cas.

Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 36. del: Ugotavljanje debeline bitumenskega vozišča

General Information

• Status: Withdrawn
• Publication Date: 11-Mar-2003
• Withdrawal Date: 05-Apr-2022
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 1 - Bituminous mixtures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 06-Apr-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 12697-36:2004 - Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement

Relations

• Replaced By: EN 12697-36:2022 - Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2004
%LWXPHQVNH]PHVL±3UHVNXVQHPHWRGH]DYURþHDVIDOWQH]PHVL±GHO
8JRWDYOMDQMHGHEHOLQHELWXPHQVNHJDYR]LãþD
Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the
thickness of a bituminous pavement
Asphalt - Prüfverfahren für Heißasphalt - Teil 36: Bestimmung der Dicke von
Fahrbahnbefestigungen aus Asphalt
Mélanges bitumineux - Méthodes d'essai pour enrobés a chaud - Partie 36:
Détermination des épaisseurs de chaussée bitumieuse
Ta slovenski standard je istoveten z: EN 12697-36:2003
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 12697-36
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2003
ICS 93.080.20
English version
Bituminous mixtures - Test methods for hot mix asphalt - Part
36: Determination of the thickness of a bituminous pavement
Matériaux enrobés - Méthodes d'essai pour enrobés à Asphalt - Prüfverfahren für Heißasphalt - Teil 36:
chaud - Partie 36: Méthode d'évaluation d'épaisseur d'un Bestimmung der Dicke von Fahrbahnbefestigungen aus
revêtement bitumineux Asphalt
This European Standard was approved by CEN on 21 November 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12697-36:2003 E
worldwide for CEN national Members.

Contents
page
Foreword.3
1 Scope .6
2 Apparatus .6
3 Test specimens .6
4 Procedure .6
5 Test report .9
6 Precision.9
Foreword
This document (EN 12697-36:2003) has been prepared by Technical Committee CEN/TC 227 "Road materials",
the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at the
latest by August 2005.
This European Standard is one of a series of standards as listed below.
EN 12697-1, Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content
EN 12697-2, Bituminous mixtures - Test methods for hot mix asphalt - Part 2: Determination of particle size
distribution
EN 12697-3, Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Binder recovery: Rotary evaporator
EN 12697-4, Bituminous mixtures - Test methods for hot mix asphalt - Part 4: Binder recovery: Fractionating
column
EN 12697-5, Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum
density
EN 12697-6, Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of
bituminous specimen by hydro-static method
EN 12697-7, Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of
bituminous specimens by gamma rays
EN 12697-8, Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics
of bituminous specimens
EN 12697-9, Bituminous mixtures - Test methods for hot mix asphalt - Part 9: Determination of the reference
density
EN 12697-10, Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactibility
prEN 12697-11, Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the
compatability between aggregate and binder
prEN 12697-12, Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water
sensitivity of specimens
EN 12697-13, Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement
EN 12697-14, Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content
EN 12697-15, Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation
sensitivity
prEN 12697-16, Bituminous mixtures - Test methods for hot mix asphalt - Part 16: Abrasion by studded tyres
prEN 12697-17, Bituminous mixtures - Test methods for hot mix asphalt - Part 17: Particle loss of porous asphalt
specimen
prEN 12697-18, Bituminous mixtures - Test methods for hot mix asphalt - Part 18: Binder drainage from porous
asphalt
prEN 12697-19, Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen
prEN 12697-20, Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or
marshall specimen
prEN 12697-21, Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate
specimens
prEN 12697-22, Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking
prEN 12697-23, Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect
tensile strength of bituminous specimens
prEN 12697-24, Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue
prEN 12697-25, Bituminous mixtures - Test methods for hot mix asphalt - Part 25: Cyclic compressiontest
prEN 12697-26, Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness
EN 12697-27, Bituminous mixtures - Test methods for hot mix asphalt - Part 27: Sampling
EN 12697-28, Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for
determining binder content, water content and grading
EN 12697-29, Bituminous mixtures - Test methods for hot mix asphalt - Part 29: Determination of the dimensions
of a bituminous specimen
prEN 12697-30, Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation, impact
compactor
prEN 12697-31, Bituminous mixtures - Test
...