Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines

This European Standard sets out the requirements and/or measures to remove the hazards and limit the risk on NC boring machines and NC routing machines (as defined in 3.1) herein after referred to as "machines" designed to cut solid wood, chip board, fibreboard, plywood and also these materials where these are covered with plastic laminate or edgings.  This European standard covers all the hazards relevant to this machine which are listed in clause 4. This European standard does not cover the hazards related to Electromagnetic compatibility (EMC) as stated in the EMC directive 89/336 EEC dated 03.05.89.  This European standard does not apply to NC, boring and routing machines with edge banding facilities.  This standard is primarily directed to machines which are manufactured after the date of issue of this standard.

Sicherheit von Holzbearbeitungsmaschinen - Fräsmaschinen für einseitige Bearbeitung mit drehendem Werkzeug - Teil 3: NC-Bohr- und Fräsmaschinen

Diese Europäische Norm legt die Anforderungen und/oder Maßnahmen zur Beseitigung der Gefährdungen und zur Begrenzung der Risiken an NC-Bohrmaschinen und NC-Fräsmaschinen (wie in 3.1 definiert), nachfolgend als "Maschinen" bezeichnet, fest, die bestimmt sind zum Bearbeiten von Massivholz, Spanplatten, Faserplatten oder Sperrholz, sowie diesen Werkstoffen, wenn sie mit Kunststoffkanten und/oder Kunststoffbeschichtung versehen sind. Diese Norm behandelt die von der Maschine ausgehenden Gefährdungen wie in 4 aufgelistet.

Sécurité des machines pour le travail du bois - Machines à fraiser sur une face à outil rotatif - Partie 3: Perceuses et défonceuses à commande numérique

La présente norme européenne spécifie les exigences et/ou les mesures pour éliminer les phénomènes dangereux et limiter les risques sur les perceuses et les défonceuses à commande numérique (définies en 3.1.1) désignées ci-après sous le terme machines conçues pour usiner du bois, des panneaux de fibres ou de particules, de contre-plaqué ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de plastique ou de plaquage. La présente norme européenne couvre tous les risques présentés par ces machines et dont la liste figure à l'article 4.

Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines

General Information

Status
Withdrawn
Publication Date
21-Sep-1999
Withdrawal Date
27-Mar-2007
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
28-Mar-2007
Completion Date
28-Mar-2007

Relations

Buy Standard

Standard
EN 848-3:2000
English language
58 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machinesSicherheit von Holzbearbeitungsmaschinen - Fräsmaschinen für einseitige Bearbeitung mit drehendem Werkzeug - Teil 3: NC-Bohr- und FräsmaschinenSécurité des machines pour le travail du bois - Machines a fraiser sur une face a outil rotatif - Partie 3: Perceuses et défonceuses a commande numériqueSafety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines79.120.10Lesnoobdelovalni strojiWoodworking machines25.040.20Numerically controlled machinesICS:Ta slovenski standard je istoveten z:EN 848-3:1999SIST EN 848-3:2000en01-april-2000SIST EN 848-3:2000SLOVENSKI
STANDARD



SIST EN 848-3:2000



SIST EN 848-3:2000



SIST EN 848-3:2000



SIST EN 848-3:2000



SIST EN 848-3:2000



SIST EN 848-3:2000



SIST EN 848-3:2000



SIST EN 848-3:2000



SIST EN 848
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.