prEN ISO 10286
(Main)Gas cylinders - Vocabulary (ISO/DIS 10286:2024)
Gas cylinders - Vocabulary (ISO/DIS 10286:2024)
This document defines terms for gas cylinders.
Gasflaschen - Vokabular (ISO/DIS 10286:2024)
Dieses Dokument legt Begriffe für Gasflaschen fest.
Bouteilles à gaz - Vocabulaire (ISO/DIS 10286:2024)
Le présent document définit les termes pour les bouteilles à gaz.
Plinske jeklenke - Terminologija (ISO/DIS 10286:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Plinske jeklenke - Terminologija (ISO/DIS 10286:2024)
Gas cylinders - Vocabulary (ISO/DIS 10286:2024)
Gasflaschen - Vokabular (ISO/DIS 10286:2024)
Bouteilles à gaz - Vocabulaire (ISO/DIS 10286:2024)
Ta slovenski standard je istoveten z: prEN ISO 10286
ICS:
01.040.23 Tekočinski sistemi in sestavni Fluid systems and
deli za splošno rabo (Slovarji) components for general use
(Vocabularies)
23.020.35 Plinske jeklenke Gas cylinders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 10286
ISO/TC 58
Gas cylinders — Vocabulary
Secretariat: BSI
Bouteilles à gaz — Vocabulaire
Voting begins on:
Gasflaschen — Vokabular
2024-04-11
ICS: 23.020.35; 01.040.23
Voting terminates on:
2024-07-04
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 10286:2024(en)
DRAFT
ISO/DIS 10286:2024(en)
International
Standard
ISO/DIS 10286
ISO/TC 58
Gas cylinders — Vocabulary
Secretariat: BSI
Bouteilles à gaz — Vocabulaire
Voting begins on:
Gasflaschen — Vokabular
ICS: 23.020.35; 01.040.23
Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 10286:2024(en)
ii
ISO/DIS 10286:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Terms related to pressure receptacles .1
3.1.1 All pressure receptacles .1
3.1.2 All gas cylinders .4
3.1.3 Composite gas cylinders .5
3.1.4 Acetylene cylinders .6
3.1.5 Bundles of cylinders, battery-vehicles and MEGC .8
3.2 Terms related to accessories .9
3.3 Terms related to manufacture . .14
3.4 Terms related to testing and inspection . 15
3.5 Terms related to characteristics, properties and pressures . 20
3.6 Terms related to material . 26
Annex A (informative) Pressure system for pressure receptacles .28
Annex B (informative) Terms of Clause 3 and additional terminology — Equivalent terms in
French and German . .29
Annex C (informative) Figures related to the additional terminology given in Annex B .46
Bibliography .59
Index .60
iii
ISO/DIS 10286:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO’s adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, in collaboration with
the European Committee for Standardization (CEN) Technical Committee CEN/TC 23, Transportable
gas cylinders, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
This sixth edition cancels and replaces the fifth edition (ISO 10286:2021). The changes are as follows:
— introduction of several new terms and definitions throughout clause 3;
— correction of definitions throughout clause 3;
— removal of some terms and definitions in clause 3;
— addition to Annex B of both the terms introduced in clause 3 and of additional terms where no definition
needs to be given but the correct translation into French and German needs to be given.
In addition to text written in the official ISO languages (English, French), this document gives text in
German. This text is published under the responsibility of the Member Body for Germany (DIN) and is given
for information only. Only the text given in the official languages can be considered as ISO text.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO/DIS 10286:2024(en)
Introduction
The terms and definitions in this document are given in the following layout:
preferred term(s) in bold typeface
admitted term(s) or synonyms, in normal typeface
DEPRECATED: deprecated term deprecated term(s), in normal typeface, with the designation
“DEPRECATED”:
definition the definition, where available, in normal typeface
Note 1 to entry: notes to entry, cross-references and examples.
Figures/non-verbal representations
The terms in this document are sorted in systematic order as far as possible. Further guidance on
terminological presentation can be found in ISO 10241-1.
The definitions support the understanding of the terms used in this document. They have been prepared
with due regard to possible uses in different fields related to gas cylinders. However, it is possible that they
will require adaption for particular uses.
Within this document, the term “ADR” is for simplification used as to also include similar regulations such as
RID and ADN, where appropriate.
Table 1 shows a hierarchical overview of pressure receptacles according to the UN Model Regulations.
Annex A shows the different pressures for pressure receptacles in relation to each other.
Annex B shows a table giving both the terms of clause 3 as well as terms for additional terminology including
the translation to the other two languages of this three-language document.
Annex C shows figures related to the additional terminology given in Annex B.
Terms given in square brackets are not within the scope of this document. They are shown for information
only.
Unless noted by exception, the use of the word “cylinder” in this document refers to cylinders as well as
tubes and pressure drums.
v
ISO/DIS 10286:2024(en)
vi
Table 1 — Overview of terms for pressure receptacles and related containers which are not defined as pressure receptacles
small pressure receptacle
receptacle
containing
MEGC (mul-
gas (gas
battery-vehi- tiple-element
salvage pres- [closed [metal-hy- a
[tank ]
pressure bundle of
d
cartridge)
cle gas contain-
cylinder tube sure recepta- cryogenic dride storage
drum cylinders
b c
and er)
cle receptacle ] system ]
aerosol dis-
penser
a
In scope of CEN/TC 296 and CEN/TC 286.
b
In scope of ISO/TC 220.
c
In scope of ISO/TC 197.
d
This designation is used in the ADR.
NOTE Within this document, for simplification, the use of the term “ADR” also includes similar regulations such as RID and ADN, where appropriate.
DRAFT International Standard ISO/DIS 10286:2024(en)
Gas cylinders — Vocabulary
1 Scope
This document defines terms for gas cylinders and other pressure receptacles, their fittings and requirements
relating to their manufacture and use.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1 Terms related to pressure receptacles
3.1.1 All pressure receptacles
3.1.1.1
pressure receptacle
DEPRECATED: receptacle
transportable receptacle intended for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.