iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 89:2015/prA1:2016

(Amendment)

Gas-fired storage water heaters for the production of domestic hot water

Gas-fired storage water heaters for the production of domestic hot water

This European Standard defines the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment and classification and marking of gas-fired storage water heaters for domestic hot water uses, hereafter called "appliance".
This European Standard applies to appliances:
-   of types B11, B11BS, C11, C12, C13, C21, C31,, C32, C33, C42, C43, C51,C52, C53, C62, C63, C72, C73, C81 connected to an individual flue duct, C82 and C83 according to CEN/TR 1749;
-   fitted with atmospheric burners;
-   using one or more combustible gases corresponding to the three gas families and the pressures indicated in EN 437;
-   of nominal heat input not exceeding 150 kW (net calorific value);
-   fitted with electrically operated mechanical flue dampers that are positioned downstream of the heat exchanger.

Gasbeheizte Vorrats-Wasserheizer für den sänitären Gebrauch

Appareils de production d'eau chaude par accumulation pour usages sanitaires utilisant les combustibles gazeux

Le premier alinéa est complété par le texte suivant :
« La présente Norme européenne définit les spécifications et les méthodes d’essai relatives à la construction, la sécurité, l’utilisation rationnelle de l’énergie, l’aptitude à la fonction, l’environnement, la classification, le marquage et l’étiquetage énergétique des appareils de production d’eau chaude par accumulation pour usages sanitaires utilisant les combustibles gazeux, appelés ci-après « appareils ».
Dans le deuxième alinéa, premier tiret, la mention « selon le CEN/TR 1749 » est supprimée.
La note suivante est ajoutée :
« NOTE   Pour de plus amples informations concernant la configuration des types d’appareils, voir le CEN/TR 1749:2014 [5]. »

Akumulacijski plinski grelniki za pripravo sanitarne tople vode - Dopolnilo A1

General Information

Status
Not Published
Publication Date
17-Dec-2017
Withdrawal Date
17-Jun-2018
ICS
91.140.65 - Water heating equipment
Technical Committee
CEN/TC 48 - Domestic gas-fired water heaters
Drafting Committee
CEN/TC 48/WG 1 - Revision of EN 26
Current Stage
4098 - Decision to abandon - Enquiry
Completion Date
22-May-2018
Directive
2009/142/EC - DIRECTIVE 2009/142/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 30 November 2009 relating to appliances burning gaseous fuels
2016/426 - REGULATION (EU) 2016/426 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 March 2016 on appliances burning gaseous fuels and repealing Directive 2009/142/EC
812/2013 - Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device
814/2013 - Commission Regulation (EU) No 814/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for water heaters and hot water storage tanks
Mandate
M/534 - [C(2015)2625] Standardisation request to the European standardisation organisations pursuant to Article 10(1) of Regulation (EU) No 1025/2012 of the European Parliament and of the Council in support of implementation of Commission Regulation (EU) No 814/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for water heaters and hot water storage tanks and Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device
M/BC/CEN/89/6 - Standardization request to CEN concerning appliances burning gaseous fuels
Ref Project
SIST EN 89:2015/oprA1:2016 - Gas-fired storage water heaters for the production of domestic hot water

Relations

Amends
EN 89:2015 - Gas-fired storage water heaters for the production of domestic hot water
Effective Date
11-Mar-2015

Buy Standard

EN 89:2015/oprA1:2016EN 89:2015/oprA1:2016
PreviousNext
Draft
EN 89:2015/oprA1:2016
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2016
Akumulacijski plinski grelniki za pripravo sanitarne tople vode - Dopolnilo A1
Gas-fired storage water heaters for the production of domestic hot water
Gasbeheizte Vorrats-Wasserheizer für den sänitären Gebrauch
Appareils de production d'eau chaude par accumulation pour usages sanitaires utilisant
les combustibles gazeux
Ta slovenski standard je istoveten z: EN 89:2015/prA1:2016
ICS:
91.140.65 Oprema za ogrevanje vode Water heating equipment
97.100.20 Plinski grelniki Gas heaters
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 89:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2016
ICS
English Version
Gas-fired storage water heaters for the production of
domestic hot water
Appareils de production d'eau chaude par Gasbeheizte Vorrats-Wasserheizer für den sänitären
accumulation pour usages sanitaires utilisant les Gebrauch
combustibles gazeux
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 48.

This draft amendment A1, if approved, will modify the European Standard EN 89:2015. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 89:2015/prA1:2016:2016 E
worldwide for CEN national Members.

Contents
1 Modifications to the Foreword . 4
1 Modifications to Clause 1, Scope . 5
2 Modifications to Clause 2, Normative references . 5
3 Modifications to Clause 3, Terms and definitions . 7
4 Modifications to Clause 4, Classification of water heaters . 7
5 Modifications to Clause 5, Constructional requirements . 7
6 Modifications to Clause 6, Operational requirements . 8
7 Modifications to Clause 7, Rational use of energy . 8
8 Modifications to Clause 9, Marking and instructions . 9
9 Modifications to Clause 10, Ecodesign Data . 10
10 Modifications to Figure 2 . 10
11 Modifications to Annex ZA . 10
12 Modifications to Bibliography . 11

European foreword
This document (EN 89:2015/prA1:2016) has been prepared by Technical Committee CEN/TC 48
“Domestic gas-fired water heaters”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
1 Modifications to the Foreword
th
5 paragraph is replaced by the following text:
"This European Standard has been prepared under mandate M89/6 given to CEN by the European
Commission and the European Free Trade Association to provide a means of conforming to Essential
Requirements of EU Directive 2009/142/EC, relating to appliances burning gaseous fuels.
This amendment (A1) has been prepared under mandate M/534, given to CEN by the European
Commission
and the European Free Trade Association to provide a means of conforming to:
- requirements of Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013
implementing Directive 2010/30/UE of the European Parliament and of the Council with regard to
energy labelling requirements of water heaters, hot water tanks and packages of water heaters and
solar service;
- requirements of Commission Regulation (EU) No 814/2013 of 2 August 2013 implementing Directive
2009/125/EC of the European Parliament and of the Council with regard to eco design requirements
for water heaters and water storage tanks."
th
The 8 paragraph hereafter is deleted:
"It gives specific requirements or disposals relative to:
— requirements and test methods for type C water heaters with a fan incorporated in the combustion
air supply circuit or in the combustion products evacuation circuit;
— combustion products evacuation ducts which are part of a water heater;
— condensing water heaters;
— water heaters installed indoors and/or partially protected place;
— requirements and test procedures for resistance to freezing;
— NOx measurement;
— the metallic, plastic and other non-metallic materials that are used in water heaters and which
come into contact with water intended for human consumption. It is intended to ensure that products of
this kind complying with these requirements meet current technological development and
requirements with regard to the service life of the water heaters and their physiological suitability."
1 Modifications to Clause 1, Scope
st
The 1 paragraph is completed by the following:
"This European Standard defines the specifications and test methods for the construction, safety,
rational use
of energy and fitness for purpose, environment and classification, marking and energy labelling of gas-
fired storage water heaters for domestic hot water uses, hereafter called “appliance”.
nd st
At the 2 paragraph, at the 1 indent, the term "according to CEN/TR 1749" is deleted.
The following note is added:
"NOTE For more information on the configuration of the types of appliances, see CEN/TR 1749:2014 [5]"
2 Modifications to Clause 2, Normative references
The following references are deleted and moved to Bibliography:
"CR 1404, Determination of emissions from appliances burning gaseous fuels during type-testing
CEN/TR 1749, European scheme for the classification of gas appliances according to the method of
evacuation of the combustion products (types)"
The undated references are replaced by the following:
"EN 125:1991, Flame supervision devices for gas burning appliances — Thermoelectric flame supervision
devices
EN 126:2012, Multifunctional controls for gas burning appliances
EN 161:2011, Automatic shut-off valves for gas burners and gas appliances
EN 437+A1:2009, Test gases, test pressures, appliance categories
EN 513:2000, Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors —
Determination of the resistance to artificial weathering
EN 549:1995, Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN 573-1:2005, Aluminium and aluminium alloys — Chemical composition and form of wrought products
— Part 1: Numerical designation system
EN 1057:2006, Copper and copper alloys Seamless, round copper tubes for water and gas in sanitary and
heating applications
EN 1443:2003, Chimneys — General requirements
EN 1490:2000, Building valves ― Combined temperature and pressure relief valves ― Tests and
requirements
EN 1856-2:2009, Chimneys — Requirements for metal chimneys — Part 2: Metal flue liners and
connecting flue pipes
EN 10226-1:2004, Pipe threads where pressure tight joints are made on the threads — Part 1: Taper
external threads and parallel internal threads — Dimensions, tolerances and designation
EN 13203-1:2015, Gas-fired domestic appliances producing hot water — Appliances not exceeding 70 kW
heat input and 300 l water storage capacity — Part 1: Assessment of performance of hot water deliveries
EN 13203-2:2015, Gas-fired domestic appliances producing hot water ― Appliances not exceeding 70 kW
heat input and 300 l water storage
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 26:2023(Main)
Gas-fired instantaneous water heaters for the production of domestic hot water
SIST EN 26:2024

This European Standard defines the specifications and test methods concerning the construction, safety, rational use of energy and fitness for purpose, and also the classification and marking of gas-fired instantaneous water heaters for sanitary uses, hereafter called “water heaters”.
This European Standard applies to water heaters:
-   of types AAS, B11, B11BS, B12, B12BS, B13, B13BS, B14, B22, B23, B32, B33, B44, B52, B53, C11, C12, C13, C21, C22, C23, C32, C33, C42, C43, C52, C53, C62, C63, C72, C73, C82and C83 according to CEN/TR 1749;
-   fitted with atmospheric burners;
-   equipped with atmospheric burners assisted by a fan for the supply of combustion air or evacuation of combustion products or fully premix burners;
-   using one or more combustible gases corresponding to the three gas families and at the pressures stated in accordance to EN 437;
-   of nominal heat input not exceeding 70 kW;
-   with an ignition burner or with direct ignition of the main burner.
In this European Standard, the heat inputs are expressed in relation to the net calorific value (Hi).
This European Standard does not contain all the requirements necessary for:
-   boiling water appliances;
-   appliances intended to be connected to a mechanical means of evacuating the combustion products;
-   appliances which fulfil a dual role of space heating and heating water for sanitary use;
-   appliances making use of the heat of condensation of the water contained in the combustion products;
-   water heaters of types B21, B31, B41, B42, B43 and B51.
This European Standard only covers water heaters where the fan, if any, is an integral part of the appliance.
This European Standard:
-   does not apply to appliances not intended to be connected to a flue when they are not fitted with an atmosphere sensing device;
-   takes account of the information given in Technical Report CEN/CR 1472:1994 with respect to marking.
Type B appliances should be with a combustion products discharge safety device to comply with essential requirement 3.4.3 of the Gas Appliances Directive 2009/142/EC. In this European Standard, the appliance is identified as type B11BS.
Appliances intended to be installed outdoors or in a room separate from inhabited rooms and provided with appropriate ventilation are not required to have this combustion products discharge safety device but, in this case, appropriate warnings on the packaging, and in the instructions should clearly define the limited authorized use for this type of appliance. In this European Standard, the appliance is identified as type B11.
The main symbols used in this European Standard are summarized in Annex F.

  • Standard
    168 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 89:2015(Main)
Gas-fired storage water heaters for the production of domestic hot water
SIST EN 89:2015

This European Standard defines the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment and classification and marking of gas-fired storage water heaters for domestic hot water uses, hereafter called "appliance".
This European Standard applies to appliances:
-   of types B11, B11BS, C11, C12, C13, C21, C31,, C32, C33, C42, C43, C51,C52, C53, C62, C63, C72, C73, C81 connected to an individual flue duct, C82 and C83 according to CEN/TR 1749;
-   fitted with atmospheric burners;
-   using one or more combustible gases corresponding to the three gas families and the pressures indicated in EN 437;
-   of nominal heat input not exceeding 150 kW (net calorific value);
-   fitted with electrically operated mechanical flue dampers that are positioned downstream of the heat exchanger.

  • Standard
    159 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 26:2015/prA1:2016(Amendment)
Gas-fired instantaneous water heaters for the production of domestic hot water
SIST EN 26:2015/oprA1:2016

This European Standard defines the specifications and test methods concerning the construction, safety, rational use of energy and fitness for purpose, and also the classification and marking of gas-fired instantaneous water heaters for sanitary uses, hereafter called “water heaters”.
This European Standard applies to water heaters:
-   of types AAS, B11, B11BS, B12, B12BS, B13, B13BS, B14, B22, B23, B32, B33, B44, B52, B53, C11, C12, C13, C21, C22, C23, C32, C33, C42, C43, C52, C53, C62, C63, C72, C73, C82and C83 according to CEN/TR 1749;
-   fitted with atmospheric burners;
-   equipped with atmospheric burners assisted by a fan for the supply of combustion air or evacuation of combustion products or fully premix burners;
-   using one or more combustible gases corresponding to the three gas families and at the pressures stated in accordance to EN 437;
-   of nominal heat input not exceeding 70 kW;
-   with an ignition burner or with direct ignition of the main burner.
In this European Standard, the heat inputs are expressed in relation to the net calorific value (Hi).
This European Standard does not contain all the requirements necessary for:
-   boiling water appliances;
-   appliances intended to be connected to a mechanical means of evacuating the combustion products;
-   appliances which fulfil a dual role of space heating and heating water for sanitary use;
-   appliances making use of the heat of condensation of the water contained in the combustion products;
-   water heaters of types B21, B31, B41, B42, B43 and B51.
This European Standard only covers water heaters where the fan, if any, is an integral part of the appliance.
This European Standard:
-   does not apply to appliances not intended to be connected to a flue when they are not fitted with an atmosphere sensing device;
-   takes account of the information given in Technical Report CEN/CR 1472:1994 with respect to marking.
Type B appliances should be with a combustion products discharge safety device to comply with essential requirement 3.4.3 of the Gas Appliances Directive 2009/142/EC. In this European Standard, the appliance is identified as type B11BS.
Appliances intended to be installed outdoors or in a room separate from inhabited rooms and provided with appropriate ventilation are not required to have this combustion products discharge safety device but, in this case, appropriate warnings on the packaging, and in the instructions should clearly define the limited authorized use for this type of appliance. In this European Standard, the appliance is identified as type B11.
The main symbols used in this European Standard are summarized in Annex F.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 26:2023(Main)
Gas-fired instantaneous water heaters for the production of domestic hot water
SIST EN 26:2024

This European Standard defines the specifications and test methods concerning the construction, safety, rational use of energy and fitness for purpose, and also the classification and marking of gas-fired instantaneous water heaters for sanitary uses, hereafter called “water heaters”.
This European Standard applies to water heaters:
-   of types AAS, B11, B11BS, B12, B12BS, B13, B13BS, B14, B22, B23, B32, B33, B44, B52, B53, C11, C12, C13, C21, C22, C23, C32, C33, C42, C43, C52, C53, C62, C63, C72, C73, C82and C83 according to CEN/TR 1749;
-   fitted with atmospheric burners;
-   equipped with atmospheric burners assisted by a fan for the supply of combustion air or evacuation of combustion products or fully premix burners;
-   using one or more combustible gases corresponding to the three gas families and at the pressures stated in accordance to EN 437;
-   of nominal heat input not exceeding 70 kW;
-   with an ignition burner or with direct ignition of the main burner.
In this European Standard, the heat inputs are expressed in relation to the net calorific value (Hi).
This European Standard does not contain all the requirements necessary for:
-   boiling water appliances;
-   appliances intended to be connected to a mechanical means of evacuating the combustion products;
-   appliances which fulfil a dual role of space heating and heating water for sanitary use;
-   appliances making use of the heat of condensation of the water contained in the combustion products;
-   water heaters of types B21, B31, B41, B42, B43 and B51.
This European Standard only covers water heaters where the fan, if any, is an integral part of the appliance.
This European Standard:
-   does not apply to appliances not intended to be connected to a flue when they are not fitted with an atmosphere sensing device;
-   takes account of the information given in Technical Report CEN/CR 1472:1994 with respect to marking.
Type B appliances should be with a combustion products discharge safety device to comply with essential requirement 3.4.3 of the Gas Appliances Directive 2009/142/EC. In this European Standard, the appliance is identified as type B11BS.
Appliances intended to be installed outdoors or in a room separate from inhabited rooms and provided with appropriate ventilation are not required to have this combustion products discharge safety device but, in this case, appropriate warnings on the packaging, and in the instructions should clearly define the limited authorized use for this type of appliance. In this European Standard, the appliance is identified as type B11.
The main symbols used in this European Standard are summarized in Annex F.

  • Standard
    168 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16510-2-4:2022(Main)
Residential solid fuel burning appliances - Part 2-4: Independent boilers - Nominal heat output up to 50 kW
SIST EN 16510-2-4:2023

This document is applicable to independent boiler appliances for solid fuel with a nominal output up to 50 kW (hand and automatically fired independent boilers (hereafter called appliances)).
The indented use of the appliances is space heating in residential buildings. This happens directly or via provision of hot water for central heating. They are designed for use only with open vented systems at a working pressure not exceeding 2 bar.
The appliances can burn one or more types of the following solid fuels as specified:
-   wood logs;
-   compressed untreated wood;
-   wood pellets;
-   lignite briquettes;
-   solid mineral fuels;
-   peat briquettes.
The appliances are operated closed and/or open.
The appliances are typed according to their tightness depending on their designation in accordance with a possible operation together with a room ventilation system.
This document is not applicable for:
-   appliances for hot water only production and heat output < 5 kW;
-   automatic stoking devices.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of solid fuel burning independent boiler appliances.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13203-3:2022(Main)
Gas-fired domestic appliances producing hot water - Part 3: Assessment of energy consumption of solar supported gas-fired appliances
SIST EN 13203-3:2022

This document is applicable to solar supported gas-fired appliances producing domestic hot water. It applies to a system marketed as single unit or a fully specified system that:
-   has a gas heat input not exceeding 70 kW;
-   has a hot water storage tank capacity not exceeding 500 l;
-   is equipped with at least one solar collector;
-   is, with regard to the solar hydraulic circuit, considered as a forced circulation system (definition according to EN ISO 9488:1999).
The appliances covered by this document are described in Annex E (normative).
This document does not apply to thermo-siphon or integral collector storage tank systems according to definitions given by EN ISO 9488:1999.
NOTE   In principle, the energy consumption of thermo-siphon solar preheat systems and integral collector storage tank preheat systems can also be assessed based on this document. One appropriate procedure for that purpose is to calculate the temperature level of the domestic hot water withdrawn from the thermal solar system for the reference conditions specified in this standard by using the numerical system model and the thermal solar system performance parameters according to ISO 9459-5. Based on the temperature level of the hot water withdrawn from the store the energy consumption of the gas appliance is determined. This determination can either be done by means of calculations or by performing a test according to EN 13203 2:2022 and using instead of the cold water inlet temperature the hot water temperature withdrawn from the store.
This document is not intended to assess the performance:
-   of the solar collector(s), which should comply with EN 12975-1:2006+A1:2010 and EN 12975-2:2006;
-   of thermal solar systems and components, which should comply with EN 12976-1:2021 and EN 12976-2:2019.
EN 13203-1:2015 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a presenting the information to the user.
The present document sets out a method for assessing the energy performance of a solar supported appliance. It specifies a few daily tapping cycles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures including information about the available solar radiation. It enables the energy performances of different gas-fired appliances to be compared and matched to the needs of the user.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13203-7:2022(Main)
Gas-fired domestic appliances producing hot water - Part 7: Assessment of energy consumption of combination boilers equipped with a passive flue heat recovery device
SIST EN 13203-7:2022

This document is applicable to gas-fired appliances producing domestic hot water. It applies to condensing combination boilers with passive flue heat recovery device (PFHRD) that have:
-   a heat input not exceeding 400 kW;
-   a hot water storage tank capacity (if any) not exceeding 2 000 l;
-   a declared load profile between M to 4XL.
In the case of combination boilers, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit.
For this document, some tests and calculation results of EN 13203-2:2022 are used to calculate the energy consumptions.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13203-4:2022(Main)
Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity
SIST EN 13203-4:2022

This document is applicable to gas-fired mCHP appliances producing domestic hot water and electricity. The electricity is generated in a process linked to the production of useful heat.
It applies to a mCHP appliances marketed as single unit or as a package fully specified by a manufacturer that have:
-   a gas heat input not exceeding 400 kW;
-   an electrical output not exceeding 50 kW;
-   a hot water storage capacity (if any) not exceeding 2 000 l.
EN 13203-1:2015 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a variety of uses. It also gives a system for presenting the information to the user.
The present document sets out a method for assessing the energy performance of gas fired mCHP appliances. It defines several daily tapping cycles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user.
When the mCHP generator does not supply domestic hot water in the summer period, the present standard is not applicable. EN 13203-2:2022 is used for performance assessment of these generators.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13203-5:2022(Main)
Gas-fired domestic appliances producing hot water - Part 5: Assessment of energy consumption of gas-fired appliances combined with electrical heat pump
SIST EN 13203-5:2022

This document is applicable to gas-fired appliances producing domestic hot water. It applies to both instantaneous and storage gas-fired combined with electric heat pump.
It applies to a package marketed as single unit or fully specified by the manufacturer that have:
-   a heat input not exceeding 400 kW;
-   a hot water storage tank capacity (if any) not exceeding 2 000 l.
EN 13203-1:2015 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user. The present document sets out a method for assessing the energy performance of gas fired appliances combined with heat pump with electrically driven compressor according to EN 16147. It specifies a number of daily load profiles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user. Where other technologies are combined with a gas-fired boiler or a water heater to produce domestic hot water, specific parts of EN 13203 apply.
The present document does not apply for gas boilers with recovery systems using combustion products as heat source for the electrical heat pump.
When the electrical heat pump does not work for domestic hot water production in the summer period, the present standard is not applicable for energy performances assessing, instead EN 13203-2:2022 is applicable.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13203-6:2022(Main)
Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps
SIST EN 13203-6:2022

This document is applicable to gas-fired appliances producing domestic hot water. It applies to sorption heat pumps connected to or including a domestic hot water storage tank. It applies to a package marketed as single unit or fully specified that have:
-   a heat input not exceeding 400 kW;
-   a hot water storage tank capacity (if any) not exceeding 2 000 l.
In the case of gas-fired sorption heat pumps, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit.
EN 13203-1:2015 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user. The present document sets out a method for assessing the energy performance of the appliances. It specifies a number of daily load profiles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user. Where other technologies are combined with a gas-fired sorption heat to produce domestic hot water, specific parts of EN 13203 apply.
Horizontal ground heat sources are not covered by the scope of the present document.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day